published date : may 09, 2005 drawing no : xdsa3590 v2 checked : b.l.liu p.1/3 part number: XZZY53W-1 www .sunled.com 1.6x0.8mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZZY53W-1 yellow ingaalp water clear 70 218 590 120 absolute maximum ratings (t a =25c ) ) ) ) zy (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 zy (ingaalp) unit forward voltage (typ.) (if=20ma) v f 2.3 v forward voltage (max.) (if=20ma) v f 2.8 v reverse current (vr=5v) i r 10 ua wavelength of peak emission (if=20ma) p 590 nm wavelength of dominant emission (if=20ma) d 589 nm spectral line full width at half-maximum (if=20ma) ? 20 nm capacitance (vf=0v, f=1mhz) c 45 pf operating characteristics (t a =25c ) ) ) ) features 1.6mmx0.8mm smt led, 0.75mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. package: 2000pcs / reel . rohs compliant.
published date : may 09, 2005 drawing no : xdsa3590 v2 checked : b.l.liu p.2/3 part number: XZZY53W-1 www .sunled.com 1.6x0.8mm smd chip led lamp zy
published date : may 09, 2005 drawing no : xdsa3590 v2 checked : b.l.liu p.3/3 part number: XZZY53W-1 www .sunled.com 1.6x0.8mm smd chip led lamp remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters. tape specification (units : mm) recommended soldering pattern (units : mm;tolerance: 0.1)
|