rgc chip resistors product specifications contained in this catalogue are subject to change at any time without notice. please confirm specificati ons with your order. 2 rohs 3 4 th b all styles tp ba dtp rgc 1/16 product type style c 473 rated resistance value marking is with 3-digit (e24) or 4-digit (e96) on the over coating. rgc1/16 : only 3digit marking is available. rgc1/16s,1/20 : only no marking is available. rated dissipation & size code rated dissipation metric 1/16s 0.063w 1005 1608 2012 3216 inch 0402 1/20 0.05w 0603 0201 0603 0805 1206 1/16 1/10 1/8 0.125w (0.1w) 0.25w (0.125w) temperature coefficient of resistance c 50 10 -6 / c k 100 10 -6 / c tolerance on rated resistance d 0.5% f 1.0% rgc1/16s rgc1/16 rgc1/10 rgc1/8 rgc1/16 rgc1/10 rgc1/8 rated resistance 4-digit e96 series e.g. : 7152=71.5k ohm 3-digit e24 series e.g. : 473=47k ohm * packaging & standard qty. (min.) bulk (loose package) paper tape (2 mm pitch) paper tape bulk case 1,000pcs. pa rgc1/20 press-pocket paper tape (2mm pitch) 15,000pcs. 10,000pcs. 5,000pcs. 25,000pcs. 10,000pcs. 5,000pcs. *refer to tape and packaging information on pages 52 and 53. part number description example kamaya ohm fixed thick film chip resistors; rectangular type & precision features 1. suitable for precision applications. 2. high stabilized characteristics and performance equivalent to thin- film chip resistors. 3. precise dimension by laser-scriber method (rgc1/20). 4. press pocket taping package (rgc1/20). 5. please contact kamaya for halogen and antimony free product of rgc series. 6. stability class : 5% rgc dimensions unit : mm *values for reference rgc1/8 0.15 3.2 0.15 0.1 0.25 0.25 9mg 5mg 2mg 0.6mg rgc1/10 1.25 0.10 2.0 0.1 0.1 0.2 0.2 rgc1/16 1.6 0.1 0.45 0.10 0.25 0.10 0.1 0.05 rgc1/16s 0.05 1.0 0.05 1005 1608 2012 3216 0.35 0.05 0.1 0.05 0.1 style w l metric 0402 0603 0805 1206 inch hcd *unit weight/pc. 0.25 0.15 0.05 0.8 w dd l cc h 0.5 1.6 0.6 0.6 0.2 0.16mg rgc1/20 0.03 0.6 0.03 0603 0.23 0.03 0.05 0201 0.15 0.3 0.1 0.4 0.5 0.3 0.4 0.5 new * please contact kamaya sales department for 1mm pitch taping of rgc1/16s, 1/20. 0.1w (0.063w) if category temperature range is "?5~+155", rated dissipation is applied to in ( ).
percentage of the rated dissipation(%) kamaya ohm fixed thick film chip resistors; rectangular type & precision rgc ratings ambient temperature ( c) 100 0 55 125 155 70 derating curve the derated values of dissipation for temperatures in excess of 70 c shall be indicated by the following curve. 1 if category temperature range is "?5~+155", rated dissipation is applied to in ( ). description requirements no breakdown or flashover r 1g ohm test methods clause 4.7 clause 4.13 clause 4.23 clause 4.25.1 clause 4.17 clause 4.18 clause 4.19 clause 4.32 clause 4.33 rgc1/20 50va.c.,60s rgc1/16s, 1/16, 1/10, 1/8 100va.c.,60s the applied voltage shall be 2.5 times of the rated voltage or twice of the limiting element voltage, whichever is the less severe, 2s. dry/damp heat (12 + 12h cycle), first cycle./ cold/damp heat (12 + 12h cycle), remaining cycle. /d.c.load. rated voltage, 1.5h"on", 0.5h"off", 70 c, 1,000h. 235 c, 2s after immersion into the flux, the immersion into solder shall be carried out in solder bath at 260 c for 5s. 5 cycles between ? 55 c and + 125 c 2 ( + 155 c). 5n, 10s (rgc1/20 : 3n) amount of bend : 3 mm voltage proof overload climatic sequence endurance at 70 c solderability resistance to soldering heat rapid change of temperature adhesion bend strength of the face plating climatic category 55/125/56 2 (55/155/56) lower category temperature ? 55 c 2 (?5 c) upper category temperature + 125 c 2 (+155 c) duration of the damp heat, steady-state tes t 56 days 2 (56 days) ? r (1% + 0.05 ohm) no visible damage, legible marking in accordance with clause 4.17.4.5 ? r (1% + 0.05 ohm) ? r (1% + 0.05 ohm) no visible damage ? r (5% + 0.1 ohm) no visible damage ? r (5% + 0.1 ohm) no visible damage, legible marking ? r (5% + 0.1 ohm) no visible damage ? r (5% + 0.1 ohm) no visible damage no visible damage ? r (1% + 0.05 ohm) clause 4.8 measuring temperature : + 20 c/ + 125 c 2 ( + 155 c) / + 20 c variation of resistance with temperature see ratings table clause 4.24 40 c, 95%r.h., 56 days, test a) and b) of clause 4.24.2.1 damp test, steady state clause 4.25.3 125 c 2 (155 c), no-load, 1,000h. endurance at the upper category temperature style size metric (inch) limiting element voltage v 100 50 100 100 50 100 50 50 k k k c c 100 50 k c k c c temperature coefficient of resistance tolerance on rated resistance rated resistance range 10 100 1k 1m isolation voltage v category temperature range c 50 150 200 d( 0.5%) f( 1%) d( 0.5%) f( 1%) d( 0.5%) f( 1%) f( 1%) d ( 0.5%), f ( 1%) f( 1%) d ( 0.5%), f ( 1%) rated dissipation at 70 c w 0.1 1 (0.063) 0.125 1 (0.1) 0.063 0.25 1 (0.125) rgc1/16s rgc1/16 rgc1/10 rgc1/8 100 500 55 125 1 ( 55 155 ) 55 155 25 50 55 125 10 -6 / c code 10 97.6 100 1m 51 976 1k 1m 1.02m 3.3m 3.3 9.76 10 97.6 100 1m 1.02m 3.3m 3.3 9.76 3.3 9.76 10 4.7m 10 3.3m 2 2 ( ) on derating curue, climatic category, and test methods will be applied, when upper category temperature is +155 c. 1005 (0402) 0.05 rgc1/20 0603 (0201) 1608 (0603) 2012 (0805) 3216 (1206) area of recommended operation note1. e24, e96 are avaialable for "f"(1%) and "d"(0.5%) note2. rated voltage = (rated dissipation) (rated resistance). (d.c. or a.c. r.m.s. voltage) note3. limiting element voltage can only be applied to resistors when the resistance value is equal to or higher than the cri tical resistance value. note4. critical resistance value is the resistance value at which the rated voltage is equal to the limiting element voltage. performance characteristics jis c 5201-1 : 1998 5 product specifications contained in this catalogue are subject to change at any time without notice. please confirm specificati ons with your order. 2 rohs 3 chip resistors rgc
|
