spec no: dsaa4937 rev no: v.8 date: mar/16/2005 page: 1 of 6 approved: j. lu checked: allen liu drawn:b.h.li package dimension s attention observe precautions for handling electrostatic discharge sensitive device s 3.2mmx3.6mm full - color surface mount led lamp features low power consumption. 3.2mmx3.6mm smt led, 1.1mm thickness. one red, one green and one blue chips in one package. can produce any color in visible spectrum, including white light. package : 1000pcs / reel. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0.008") unless otherwise noted. 3. specifications are subjected to change without notice. description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode. the green source color devices are made with ingan on sic light emitting diode. the blue source color devices are made with ingan on sic light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti - electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. kpf - 3236surkvgpbc hyper red green blue
spec no: dsaa4937 rev no: v.8 date: mar/16/2005 page: 2 of 6 approved: j. lu checked: allen liu drawn:b.h.li selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpf - 3236surkvgpbc hyper red (ingaalp) water clear 70 150 green (ingan) 50 100 120 blue (ingan) 18 60 symbol parameter device typ. max. test conditions units peak peak wavelength hyper red green blue 650 520 468 nm i f =20ma d dominant wavelength hyper red green blue 635 525 470 nm i f =20ma ? 1/2 spectral line half - width hyper red green blue 28 38 25 nm i f =20ma c capacitance hyper red green blue 35 45 65 pf v f =0v;f=1mhz v f forward voltage hyper red green blue 1.95 3.5 3.65 2.5 4.5 4.2 v i f =20ma i r reverse current all 10 ua v r = 5v parameter hyper red green blue units power dissipation 170 105 102 mw dc forward current 30 30 30 ma peak forward current [1] 185 150 160 ma reverse voltage v operating/storage temperature - 40c to +85c 5
spec no: dsaa4937 rev no: v.8 date: mar/16/2005 page: 3 of 6 approved: j. lu checked: allen liu drawn:b.h.li kpf - 3236surkvgpbc hyper red
spec no: dsaa4937 rev no: v.8 date: mar/16/2005 page: 4 of 6 approved: j. lu checked: allen liu drawn:b.h.li green
spec no: dsaa4937 rev no: v.8 date: mar/16/2005 page: 5 of 6 approved: j. lu checked: allen liu drawn:b.h.li blue
spec no: dsaa4937 rev no: v.8 date: mar/16/2005 page: 6 of 6 approved: j. lu checked: allen liu drawn:b.h.li recommended soldering pattern (units : mm) tape specifications (units : mm) kpf - 3236surkvgpbc smt reflow soldering instructions number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process. remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
