amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 1 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. features ? 1.2 watt saturated output power level ? variable drain voltage (6-8v) operation ? msag? process ? 5x5 mm 20 lead mlp package description the MAAP-000038-PKG003 is a packaged, 3-stage, 1.2 w power amplifier with on-chip bias netwo rks in a 20 lead mlp package, allowing easy assembly. this product is fully matched to 50 ohms on both the input and output. it c an be used as a power amplifier stage or as a driver stage in high power applications. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com?s gaas multifunction self- aligned gate (msag) process. the 5 mm pqfn package has a lead-free lead finish that is rohs compliant and compatible with a 260oc reflow temperature. the package also features low lead i nductance and an excellent thermal path. the mttf is 1,000,000 hours at 170oc. primary applications ? weather radar ? airborne radar ordering information parameter symbol typical* units bandwidth f 8.5-10.5 ghz output power pout 31.5 dbm power added efficiency pae 17 % 1-db compression point p1db 30 dbm small signal gain g 17 db input vswr vswr 2.5:1 ? output vswr vswr 2:1 ? output third order intercept otoi 41 dbm 3 rd order intermodulation distortion, single carrier level = 21 dbm im3 42 dbc gate supply current i gg <10 ma drain supply current i dd 0.9 a electrical characteristics: t c = 40c 1 , z 0 = 50 , v dd = 8v, i dq 710ma 2 , p in = 16dbm, r g 30 ? 1. t c = case temperature 2. adjust v gg between ?2.5 to ?1.2v to achieve indicated i dq . description die ceramic pkg tape & reel (500) tape & reel (1000) plastic pkg sample brd part number maapgm0038-die maapgm0038 maap-000038-t r0500 maap-000038-tr1000 maap-000038-smb003 yyww ap038g xxx macom
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 2 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -2.7 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 8.0 v. 3. adjust v gg to set i dq , (approximately @ ?2 v). 4. set rf input. 5. power down sequence in reverse. turn v gg off last. operating instructions characteristic symbol min typ max unit drain supply voltage v dd 6.0 8.0 8.0 v gate supply voltage v gg -2.5 -2.0 -1.2 v input power p in 16.0 19.0 dbm thermal resistance jc 16.9 c/w case temperature t c note 5 c parameter symbol absolute maximum units input power p in 21.0 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 1.15 a quiescent dc power dissipated (no rf) p diss 11.5 w junction temperature t j 170 c storage temperature t stg -55 to +150 c maximum ratings 3 3. operation beyond these limits may result in permanent damage to the part. 4. operation outside of these ranges may reduce product reliability. 5. maximum case temperature = 170c ? jc * v dd * i dq recommended operating conditions 4 power derating curve, quiescent (no rf) 0 2 4 6 8 10 12 14 -40 -20 0 20 40 60 80 100 120 140 160 180 maximum allowable case temperature (c) peak power dissipation (watts)
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 3 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 6. small signal gain & saturated output power, power added efficiency and drain current vs. case temperature at 9.5ghz, vd = 8v, and idq = 0.71a 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 case temperature (oc) ssg (db), pout (dbm), pae (%) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 ids (a) ssg pout pae ids figure 5. saturated output power vs. frequency and case temperature at vd = 8v and idq = 0.71a 20 22 24 26 28 30 32 34 36 38 40 8.5 9.0 9.5 10.0 10.5 frequency (ghz) output power (dbm) -50oc 10oc 70oc figure 4. saturated power added efficiency vs. frequency and quiescent bias condition (vdd / idq) 0 5 10 15 20 25 30 35 40 8.5 9.0 9.5 10.0 10.5 frequency (ghz) pae (%) 6v / 0.71a 8v / 0.71a figure 3. saturated output power vs. frequency and quiescent bias condition (vdd / idq) 20 22 24 26 28 30 32 34 36 38 40 8.5 9.0 9.5 10.0 10.5 frequency (ghz) output power (dbm) 6v / 0.71a 8v / 0.71a figure 2. small signal gain and input & output vswr vs. frequency and quiescent bias (vdd / idq) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 8.5 9.0 9.5 10.0 10.5 frequency (ghz) gain (db) 1 2 3 4 5 6 6v / 0.71a 8v / 0.71a small signal gain out p ut vswr in p ut vswr figure 1. p1db vs. frequency and quiescent bias condition (vdd / idq) 20 22 24 26 28 30 32 34 36 38 40 8.5 9.0 9.5 10.0 10.5 frequency (ghz) p1db (dbm) 6v / 0.71a 8v / 0.71a
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 4 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. 6v 8v figure 12. power added efficiency vs. input power and frequency at vd = 8v and idq = 0.71a 0 5 10 15 20 25 30 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 frequency (ghz) pae (%) 8.5 ghz 9.5 ghz 10.5 ghz figure 11. power added efficiency vs. input power and frequency at vd = 6v and idq = 0.71a 0 5 10 15 20 25 30 -10-8-6-4-2 0 2 4 6 8101214 frequency (ghz) pae (%) 9.0 ghz 10.5 ghz 12.0 ghz figure 10. gain vs. output power and frequency at vd = 8v and idq = 0.71a 5 7 9 11 13 15 17 19 21 23 25 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 frequency (ghz) output power (dbm) 8.5 ghz 9.5 ghz 10.5 ghz figure 9. gain vs. output power and frequency at vd = 6v and idq = 0.71a 5 7 9 11 13 15 17 19 21 23 25 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 frequency (ghz) output power (dbm) 8.5 ghz 9.5 ghz 10.5 ghz figure 8. output power vs. input power and frequency at vd = 8v and idq = 0.71a 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 input power (dbm) output power (dbm) 8.5 ghz 9.5 ghz 10.5 ghz figure 7. output power vs. input power and frequency at vd = 6v and idq = 0.71a 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 -10-8-6-4-202468101214 input power (dbm) output power (dbm) 8.5 ghz 9.5 ghz 10.5 ghz
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 5 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. 6v 8v figure 18. third order intermod vs. output power and frequency at vd = 8v and idq = 0.71a 0 10 20 30 40 50 60 70 80 90 100 0 2 4 6 8 10121416182022242628 fundamental output power - single carrier (dbm) im3 (dbc) 9.0 ghz 10.0 ghz figure 17. third order intermod vs. output power and frequency at vd = 6v and idq = 0.71a 0 10 20 30 40 50 60 70 80 90 100 0 2 4 6 8 10121416182022242628 fundamental output power - single carrier (dbm) im3 (dbc) 9.0 ghz 10.0 ghz figure 16. third order intercept vs. output power and frequency at vd = 8v and idq = 0.71a 30 32 34 36 38 40 42 44 46 48 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 fundamental output power - single carrier (dbm) ip3 (dbm) 9.0 ghz 10.0 ghz figure 15. third order intercept vs. output power and frequency at vd = 6v and idq = 0.71a 30 32 34 36 38 40 42 44 46 48 50 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 fundamental output power - single carrier (dbm) ip3 (dbm) 9.0 ghz 10.0 ghz figure 14. drain current vs. input power and frequency at vd = 8v and idq = 0.71a 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 frequency (ghz) ids (a) 8.5 ghz 9.5 ghz 10.5 ghz figure 13. drain current vs. input power and frequency at vd = 6v and idq = 0.71a 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 14 frequency (ghz) ids (a) 9.0 ghz 10.5 ghz 12.0 ghz
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 6 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 20. third order intermod vs. case temperature and frequency at single carrier output power level = 20 dbm, vd = 8v and idq = 0.71a 10 15 20 25 30 35 40 45 50 55 60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 case temperature (oc) im3 (dbc) 9.0 ghz 10.0 ghz figure 19. third order intercept vs. case temperature and frequency at single carrier output power level = 20dbm, vd = 8v and idq = 0.71a 30 32 34 36 38 40 42 44 46 48 50 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 case temperature (oc) ip3 (dbm) 9.0 ghz 10.0 ghz
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 7 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 21. 5x5 mm 20-lead mlp. figure 22. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. refer to m/a-com application note surface mounting instructions for pqfn packages #s2083 * for assembly guidelines. additional precaution: all parts must receive a bake-out of 125oc for 24 hours prior to any solder reflow operation. *application notes can be found by going to the site search p age of m/a-com?s web page (http://www.macom.com/search/search.jsp) and searching for the required application note. o o ap038g 100pf (as close to the package as possible ) 0.1 f v dd 100pf (as close to the package as possible ) yyww ap038g xxx macom 0.1 f v gg 100pf (as close to the package as possible ) 100pf (as close to the package as possible ) r g
amplifier, power, 1.2w 8.5?10.5 ghz m/a-com products rohs compliant MAAP-000038-PKG003 part status: preliminary rev: b ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additi onal data sheets and pr oduct information. 8 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein with out notice. m/a-com makes no warr anty, representatio n or guarantee regarding the suitab ility of its products for an y particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 23. demonstration board pn maap-0 00038-pkg-smb (available upon request). vgg gnd (twisted pair) vdd gnd (twisted pair)
|
