mh113* series (1,13mm) .045" diameter cable mh113?mh1rp?01bj1?0300 mh113?mh1rp?mh1rp?0300 micro high frequency rf, mhf or sma bulkhead mating pcb connectors available www.samtec.com specifications for complete speci cations see www.samtec.com? mh113 outer contact material: au plated phosphor bronze center contact material: au plated phosphor bronze (mhx) au plated becu (sma) insulator material: pbt (mhx) ptfe (sma) operating temperature: -10? to +90? voltage rating: 170v max dielectric withstanding voltage: 200 vrms frequency range: 0~3 ghz contact resistance: center contact: 6m max outer contact: 2m max insulator resistance: 5,000 m impedance: 50 rohs compliant: ye s 1,13mm cable: impedance: 50 capacitance: 95pf/meter max attenuation (cable only): 2db @ 1ghz conductor size: 32 awg, (1,13mm) .045" dia. conductor material: silver plated copper conductor resistance: 0.60/meter max insulator diameter: (0,66mm) .026" insulator material: fep shield material: tinned copper jacket material: fep jacket diameter: (1,13mm) .045" dia jacket temp rating: -40? to +90? rohs compliant: ye s xxxx = oal (millimeters) (6,96) .274 (2,69) .106 dia (2,10) .083 (8,00) .315 hex. * mh113 series was previously rf113 series also available removal tool additional end connector combinations and overall lengths contact: rfgroup@samtec.com ?h1rp = rsp-122893-01 micro high frequency rf cables f-211-2 also available micro rf pcb connectors for micro high frequency rfs ?mh1rp end mates with rsp-122811-01 end 1 connector end 2 connector specify end options from chart mh113 overall length ?0030 = 1.18" (30mm) ?0050 = 1.97" (50mm) ?0100 = 3.94" (100mm) ?0150 = 5.91" (150mm) ?0300 = 11.81" (300mm) stripped & tinned (dimensions in mm) both center conductor and braid shield are stripped, only the center conductor is tinned. call samtec for other sizes or tinning options. callout ?303030 ?303040 ?403030 ?403040 ?404040 a 3.0 3.0 4.0 4.0 4.0 b 3.0 3.0 3.0 3.0 4.0 c 3.0 4.0 3.0 4.0 4.0 end options ?mh1rp = mhf1 type plug (30? (0,76?) gold on center contact, gold flash on shell) ?01bj1 = sma, straight bulkhead jack ?01bj2 = sma, straight bulkhead jack, reversed polarity ?01sb1 = sma, straight jack, sealed bulkhead ?01sr1 = sma, straight jack, sealed bulkhead, reversed polarity (30? (0,76?) gold on center contact, gold flash on shell) ?sing = single-ended (end 2 callout) xxxxxx = stripped & tinned (end 2 callout) a b c
|
