conductive polymer aluminum solid capacitors radial lead cat. no. e1001k @ super low esr, high ripple current capability @ lower pro le than psa ( f 8 b 8l to f 10 b 12.5l) @ rated voltage range : 2.5 to 16v dc @ nominal capacitance range : 270 to 2,700 m f @ endurance : 2,000 hours at 105 c @ suitable for dc-dc converters, voltage regulators and decoupling applications for computer motherboards @ added 2.5v 820 m f (esr 5m o max.) @rohs compliant ? specifications (at 20c, 120hz) (at 105c) (at 20c after 2 minutes) (at 20c, 120hz) (at 100khz) category temperature range rated voltage range capacitance tolerance surge voltage leakage current *note dissipation factor (tane) low temperature characteristics (max.impedance ratio) endurance bias humidity test surge voltage test failure rate items - 55 to +105c 2.5 to 16v dc p20% (m) rated voltageb1.15 i=0.2cv or 500ma, whichever is greater. where, i : max. leakage current (ma), c : nominal capacitance (mf), v : rated voltage (v dc ) 0.10 max. z( - 25c)/z(+20c)[1.15 z( - 55c)/z(+20c)[1.25 the following specifications shall be satisfied when the capacitors are restored to 20 c after the rated voltage is applied for 2,000 hours at 105c. appearance no significant damage capacitance change [p20% of the initial value d.f. (tane) [150% of the initial specified value esr [150% of the initial specified value leakage current [the initial specified value the following specifications shall be satisfied when the capacitors are restored to 20 c after subjecting them to dc voltage at 60c , 90 to 95% rh for 1,000 hours. appearance no significant damage capacitance change [p20% of the initial value d.f. (tane) [150% of the initial specified value esr [150% of the initial specified value leakage current [the initial specified value the capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 c for 30 seconds through a protective resistor(r=1ko ) and discharge for 5 minutes 30 seconds. appearance no significant damage capacitance change [p20% of the initial value d.f. (tane) [150% of the initial specified value esr [150% of the initial specified value leakage current [the initial specified value 0.5% per 1,000 hours maximum (confidence level 60% at 105 c) characteristics ? dimensions [mm] ? marking *note : if any doubt arises, measure the leakage current after the following voltage treatment. voltage treatment : dc rated voltage is applied to the capacitors for 120 minutes at 105 c . size code fd fd f fd' l' h08 8.0 0.6 3.5 l+1.0max. hb5 8.0 0.8 3.5 jb5 10.0 0.8 5.0 jc5 10.0 0.6 5.0 l+1.5max. fd+0.5max. (note1) (note1) note1 : 0.6 for rated volt 16v. coated case l' 15min. 4min. fd' fd fp0.5 c 3d6 820 2.5 v ex) 2.5v820mf @ terminal code : e low profile lower esr psc psa (1/2)
conductive polymer aluminum solid capacitors radial lead cat. no. e1001k ? standard ratings ? part numbering system ss : enter the appropriate lead forming or taping code. supplement code (note2) size code capacitance tolerance code capacitance code (ex. 330mf:331, 1000mf:102) lead forming taping code terminal code voltage code (ex. 4v:4r0,6.3v:6r3,10v:100) series code category a p s c a a a e a a a a a a a a s m 134 26 7 8 9 1 0 51 2 1 3 11 16 17 18 1514 please refer to "product code guide (conductive polymer type)" wv(v dc ) cap( mf) case size fdbl(mm) esr (mo max/20 c , 100k to 300khz) rated ripple current (marms/105 c , 100khz) part no. 2.5 560 8b8 7 6,100 apsc2r5e ss561mh08s 820 8 b8 5 6,100 apsc2r5e ss821mh08j 820 8b8 7 6,100 apsc2r5e ss821mh08s 1,000 8 b8 7 6,100 apsc2r5e ss102mh08s 1,000 8b11.5 7 6,100 apsc2r5e ss102mhb5s 1,500 8 b11.5 7 6,100 apsc2r5e ss152mhb5s 2,700 10b11.5 8 5,560 apsc2r5e ss272mjb5s 4 560 8b8 7 6,100 apsc4r0e ss561mh08s 680 8b11.5 7 6,100 apsc4r0e ss681mhb5s 1,000 10b11.5 6 6,640 apsc4r0e ss102mjb5s 6.3 470 8b8 8 5,700 apsc6r3e ss471mh08s 560 8 b8 8 5,700 apsc6r3e ss561mh08s 820 10b11.5 7 6,640 apsc6r3e ss821mjb5s 1,500 10b11.5 10 5,560 apsc6r3e ss152mjb5s 10 390 8b11.5 9 5,650 apsc100e ss391mhb5s 680 10b11.5 7 6,100 apsc100e ss681mjb5s 16 270 8 b11.5 11 5,080 apsc160e ss271mhb5s 330 10 b12.5 10 6,100 apsc160e ss331mjc5s 470 10 b11.5 10 6,100 apsc160e ss471mjb5s (note2) psc series, 2.5v820 m f(esr 5m o max.) has supplement code "j". can case, terminal and terminal plating are the same as all others in psc series. (2/2)
|