do not scale from this print ((no of positions / 20) x .7875[20.003]) + .0500[1.270] ref .285 7.24 ref .0060 ref 0.152 .6250 15.875 ref @ .0315 [.800] 19 eq. spaces .0225 0.571 ref .7875 20.003 .0975 2.477 ref .1195 3.035 ref c1 01 02 cqse-xxx-01-x-d-xx no of positions -020, -040, -060 -080, -100 (per row) row specification -d: double (use qse-20-xx-d-xx) option plating specification -c: electro-polished selective (use c-126-xx-c, t-1g2-xx-g) lead style -01 .1280[3.251] no of banks -a: alignment pins (use qse-20-xx-d-xx-a) na with -lc option -lc: locking clips (use lc-08-tm-01) na with -a option -gp: guide posts (see fig. 3) (use qse-20-01-d-xx-x-gp) (t & r packaging: 40 pos. max.) .055 1.40 .7250 ref 18.415 .120 ref 3.05 .010 ref 0.25 "a" "a" qse-20-01-d-xx-x fig. 1 lc-08-tm-01 cqse-060-01-x-d-lc shown .007 ref 0.18 .0375 0.953 (((no of positions / 20) x .7875[20.003]) + .005[.13]) .003 t-1g2-01-x obsolete .0350 ref 0.889 .0375 ref 0.953 (((no of positions / 20) x .7875[20.003]) +.005[.13]) ref -a: alignment pin option shown .295 ref 7.49 .056 ref 1.42 .070 [1.77] ref .1280 - .0010 + .0030 3.251 - 0.025 + 0.076 (see note 5 & 6) section "a-a" c2 c-126-01-x c3 see table 2 .0375 ref 0.953 r c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] material: .8mm double row hs socket assembly by: cqse-xxx-01-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 10/8/2007 2 1 sheet scale: 3:1 insulator: black lcp contact: phos bronze ground plane: phos bronze f:\dwg\misc\mktg\cqse-xxx-01-x-d-xx-mkt.slddrw notes: 1. contact retention: 8 oz min. 2. ground plane retention: 8 oz min. 3. represents a critical dimension. 4. parts are molded to position. 5. max variance of .002[.51]. 6. dimension applies to contacts & ground plane. 7. ground plane press height must be .003 [.08] less than the max height or .001 [.03] greater than the minimum height of the sockets. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision b
qse-20-01-d-xx-a-gp -gp option (same as fig. 1, unless otherwise stated) [available on lead style -01 & -01-a only] fig. 2 ((no of positions/20) x .7875[20.003]) + .225[5.72] ref .102 ref 2.58 .1400 thru ref 3.556 .207 ref 5.26 sheet of .8mm double row hs socket assembly by: cqse-xxx-01-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. cooper 10/8/2007 2 2 sheet scale: 2:1 revision b f:\dwg\misc\mktg\cqse-xxx-01-x-d-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
