note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: ra0038d doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number / ordering information 1 / spa555 __ __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level terminals 3 / = turret terminals l = copper leads sm = surface mount voltage m = 1000 v n = 1200 v spa555 series 20a / 1000 - 1200v sic schottky single phase bridge features: ? 1200v silicon carbide schottky rectifier ? average output current 20 amps ? no reverse recovery ? no forward recovery ? no switching time change over temperature ? small package size (1.25 x 1.25 x 0.350?) ? cases with aluminum heatsink are available. consult factory ? tx and txv & s level screening available 2 / maximum ratings symbol value units peak repetitive and peak surge reverse voltage spa555m spa555n v rrm v rsm v r 1000 1200 volts average rectified forward current 4 / (resistive load, 60 hz sine wave, t c = 55c) i o 20 amps peak surge current 5 / (8.3 ms pulse, half sine wave, t a = 25 ? c) i fsm 26 amps operating & storage temperature t op & t stg -55 to +150 oc junction temperature t j -55 to +200 oc maximum thermal resistance junction to case r jc 1.5 oc/w 1 spa555 ( ) spa555 (l) spa555 (sm)
note: all specifications are subject to change without notification. scd's for these devices should be reviewed by ssdi prior to release. data sheet #: ra0038d doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com spa555 series electrical characteristic 6 / symbol min typ max units instantaneous forward voltage drop (t a =25oc, 300 - 500 sec pulse) i f = 2.0 a i f = 5.0 a i f = 10 a v f1 v f2 v f3 ?? ?? 1.20 1.50 2.10 1.30 1.75 2.50 v dc instantaneous forward voltage drop (300 - 500 sec pulse) t a = -55oc, i f = 5 a t a = 150 oc, i f = 5 a v f4 v f5 ?? ?? 1.35 2.30 1.50 2.80 v dc reverse leakage current (rated v r , t a = 25oc, 300 sec pulse minimum) i r1 ?? 20 250 a reverse leakage current (rated v r , t a = 150oc, 300 sec pulse minimum) i r2 ?? 100 1000 a junction capacitance (v r = 10v, f = 1mhz, t a = 25c) c j ?? 280 320 pf notes: * pulse test: pulse width = 300 sec, duty cycle = 2% 1 / for ordering information, price, and availability contact factory. 2 / screening based on mil-prf-19500. screening flows available on request. 3 / for package outlines contact factory. 4 / derate linearly at 0.28a/oc for t c > 55oc. 5 / electrical characteristic per leg 6 / unless otherwise specified, all electrical characteristics @25oc. available part numbers: spa555m; spa555ml; spa555msm spa555n; spa555nl; spa555nsm terminal details spa555 (sm) spa555 (l) terminals are spaced at .650? square leads are spaced at .250? terminals are spaced at .650? square mounting diagram: 2 / spa555 ( )
|
