new product vs-30ETH06FP-F3, vs-30eth06fp-n3 www.vishay.com vishay semiconductors revision: 16-nov-11 1 document number: 93403 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 hyperfast rectifier, 30 a fred pt ? features ? reduced q rr and soft recovery ? 175 c t j maximum ? for pfc crm/ccm operation ? fully isolated package (v ins = 2500 v rms ) ? ul e78996 pending ? compliant to rohs directive 2002/95/ec ? designed and qualified according to jedec-jesd47 ? halogen-free according to iec 61249-2-21 definition (-n3 only) description/applications state of the art hyperfast reco very rectifiers designed with optimized performance of forw ard voltage drop, hyperfast recovery time and soft recovery. the planar structure and th e platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. these devices are intended for use in pfc boost stage in the ac/dc section of smps, inverters or as freewheeling diodes. their extremely optimized stored charge and low recovery current minimize the switch ing losses and reduce over dissipation in the switch ing element and snubbers. product summary package to-220fp i f(av) 30 a v r 600 v v f at i f 2.6 v t rr (typ.) 23 ns t j max. 175 c diode variation single die 3 anode 1 cathode to-220 full-pak absolute maximum ratings parameter symbol test conditions values units peak repetitive reverse voltage v rrm 600 v average rectified forward current i f(av) t c = 37 c 30 a non-repetitive peak surge current i fsm t j = 25 c 220 operating junction and storage temperatures t j , t stg - 65 to 175 c electrical specifications (t j = 25 c unless otherwise specified) parameter symbol test conditio ns min. typ. max. units breakdown voltage, blocking voltage v br , v r i r = 100 a 600 - - v forward voltage v f i f = 30 a - 2.00 2.60 i f = 30 a, t j = 150 c - 1.34 1.75 reverse leakage current i r v r = v r rated - 0.3 50 a t j = 150 c, v r = v r rated - 60 500 junction capacitance c t v r = 600 v - 33 - pf series inductance l s measured lead to lead 5 mm from package body - 8 - nh
new product vs-30ETH06FP-F3, vs-30eth06fp-n3 www.vishay.com vishay semiconductors revision: 16-nov-11 2 document number: 93403 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dynamic recovery characteristics (t j = 25 c unless otherwise specified) parameter symbol test condition s min. typ. max. units reverse recovery time t rr i f = 1 a, di f /dt = 50 a/s, v r = 30 v - 28 35 ns i f = 1 a, di f /dt = 100 a/s, v r = 30 v - 23 30 t j = 25 c i f = 30 a di f /dt = 200 a/s v r = 200 v -31- t j = 125 c - 77 - peak recovery current i rrm t j = 25 c - 3.5 - a t j = 125 c - 7.7 - reverse recovery charge q rr t j = 25 c - 65 - nc t j = 125 c - 345 - thermal - mechanical specifications parameter symbol test condition s min. typ. max. units maximum junction and storage temperature range t j , t stg - 65 - 175 c thermal resistance, junction to case per leg r thjc - - 2.85 c/w thermal resistance, junction to ambient per leg r thja typical socket mount - - 70 thermal resistance, case to heatsink r thcs mounting surface, flat, smooth and greased -0.2- weight -2-g -0.07- oz. mounting torque 6 (5) - 12 (10) kgf cm (lbf in) marking device case style to-220 full-pak 30eth06fp
new product vs-30ETH06FP-F3, vs-30eth06fp-n3 www.vishay.com vishay semiconductors revision: 16-nov-11 3 document number: 93403 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - typical forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction ca pacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics 1 10 t j = 175 c t j = 150 c t j = 25 c 1000 0 3.5 1.5 1 2.5 v f - forward voltage drop (v) i f - instantaneous forward current (a) 100 0.5 2 3 0.01 0.1 1 10 100 0200400 v r - reverse voltage (v) i r - reverse current (ma) 300 t j = 175 c t j = 150 c t j = 125 c t j = 100 c t j = 25 c 100 0.001 1000 600 500 0.0001 100 1000 0 200 400 500 600 10 v r - reverse voltage (v) c t - junction capacitance (pf) 300 100 t j = 25 c 0.01 0.1 1 10 0.00001 0.0001 0.001 0.01 0.1 1 t 1 - rectangular pulse duration (s) z thjc - thermal impedance (c/w) 100 10 d = 0.50 d = 0.20 d = 0.10 d = 0.05 d = 0.02 d = 0.01 s ingle pul s e (thermal re s i s tance)
new product vs-30ETH06FP-F3, vs-30eth06fp-n3 www.vishay.com vishay semiconductors revision: 16-nov-11 4 document number: 93403 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - maximum allowable case temperature vs. average forward current fig. 6 - forward power loss characteristics fig. 7 - typical reverse recovery time vs. di f /dt fig. 8 - typical stored charge vs. di f /dt note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = rated v r allowable case temperature (c) i f(av) - average forward current (a) 20 15 10 530 25 35 0 80 160 180 0 40 60 120 140 100 20 sq uare wave (d = 0.50) rated v r applied s ee note (1) dc 0 1020304045 average power loss (w) i f(av) - average forward current (a) 0 10 30 40 50 d = 0.01 d = 0.02 d = 0.05 d = 0.10 d = 0.20 d = 0.50 dc 20 rms limit 5152535 60 70 80 90 0 i f = 30 a i f = 15 a 10 0 0 0 1 0 0 1 t rr (ns) di f /dt (a/s) 40 60 80 90 30 50 70 v r = 200 v t j = 125 c t j = 25 c 0 20 0 0 0 1 0 0 1 q rr (nc) di f /dt (a/s) 600 1000 1200 400 800 v r = 200 v t j = 125 c t j = 25 c 0 200 i f = 30 a i f = 15 a
new product vs-30ETH06FP-F3, vs-30eth06fp-n3 www.vishay.com vishay semiconductors revision: 16-nov-11 5 document number: 93403 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - reverse recovery parameter test circuit fig. 10 - reverse recovery waveform and definitions irfp250 d.u.t. l = 70 h v r = 200 v 0.01 g d s di f /dt adju s t q rr 0.5 i rrm di (rec)m /dt 0.75 i rrm i rrm t rr t b t a i f di f /dt 0 (1) (2) (3) (4) (5) (1) di f /dt - rate of change of current through zero cro ss ing (2) i rrm - peak rever s e recovery current (3) t rr - rever s e recovery time mea s ured from zero cro ss ing point of negative going i f to point where a line pa ss ing through 0.75 i rrm and 0.50 i rrm extrapolated to zero current. (4) q rr - area under curve dened by t rr and i rrm t rr x i rrm 2 q rr = (5) di (rec)m /dt - peak rate of change of current during t b portion of t rr
new product vs-30ETH06FP-F3, vs-30eth06fp-n3 www.vishay.com vishay semiconductors revision: 16-nov-11 6 document number: 93403 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-30ETH06FP-F3 50 1000 antistatic plastic tube vs-30eth06fp-n3 50 1000 antistatic plastic tube links to related documents dimensions www.vishay.com/doc?95005 part marking information www.vishay.com/doc?95440 2 - current rating (30 a) 3 - e = single diode 4 - t = to-220 5 - h = hyperfast recovery 6 - voltage rating (06 = 600 v) 7 - full-pak 1 - vishay semiconductors product device code 5 1 3 2 4 6 7 8 vs- 30 e t h 06 fp -f3 8 -f3 = rohs compliant and totally lead (pb)-free - environmental digit: -n3 = halogen-free, rohs compliant and totally lead (pb)-free
outline dimensions www.vishay.com vishay semiconductors revision: 20-jul-11 1 document number: 95005 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters 5 0.5 3.3 3.1 5 0.5 0.9 0.7 2.54 typ. 2.54 typ. 10.6 10.4 3.7 3.2 7.31 6.91 0.61 0.38 2.85 2.65 2.8 2.6 1.4 1.3 10 4.8 4.6 16.0 15.8 16.4 15.4 (2 places) r 0.7 r 0.5 hole ? 3.4 3.1 typ. 1.15 1.05 13.56 13.05 lead assignments diode s 1 + 2 - cathode 3 - anode conforms to jedec outline to-220 full-pak
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
