a.c. l1 l2 l5 led d housing b-2 5 output functions ? amplified in d.c. + a.c. 2 wires ? cable output ? l1 l2 l3 l5 led d general features: when used in a.c. they work as normally open. when used in d.c. they can work as normally open or normally closed simply by reversing the connection wires. the load can be connected indifferently on the positive or on the negative pole. these sensors put together the four functions of traditional 3 wires amplified sensors: pnp - no; pnp - nc; npn - no; npn - nc. besides the a.c. working in many applications they can replace directly electromechanical microswitches. technical data: supply voltage (u b ): 10 60 vdc/vac electrical system frequency: 40 60 hz max ripple: 10% off-state current (i r ): 0,6 ma minimum operational current (i m ): 5 ma rated operational current (i e ): 400 ma voltage drop (u d ): 4 v temperature range: - 20 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 led indication: yellow = output state blinking red = output short circuit cable conductor cross section: 0,75 mm 2 protected against short-circuit and overload suppression of initial false impulse class 2 equipment according to iec 536 shock and vibration according to en60068-2-27 en60068-2-6 electromagnetic compatibility (emc) according to en61000-6-2/- 4 housing g ordering references pnp no i + - rx blue brown nc i + - rx blue brown npn no i blue brown rx - + nc i blue brown rx - + housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l5 mm mm nominal sensing distance ( s n ) ?0% mm max switching frequency ( f ) hz b - 2 b - 2 g g - 10 - 15 50 40 50 35 - - 10 10 50 50 60 60 mm 5 5 5 5 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 5 8 10 15 800 400 600 300 dx18/4a5xks dx18/5a5xks dx30/465xks dx30/565xks diameter max tightening torque nm nut m18 x 1 m30 x 1,5 size sw24 sw36 thickness mm 4 5 35 80 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing: nickel plated brass sensing face: plastic no i blue brown rx bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-51 cylindrical inductive sensors in metal housing a051 9-02-2007 8:58 pagina a-51 www..net
max switching frequency ( f ) hz rated operational current ( i e ) ma 800 400 600 300 400 400 400 400 ? 5 output functions ? amplified in d.c. + a.c. 2 wires ? connector output m12 x 1 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-12 d l1 l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 general features: when used in a.c. they work as normally open. when used in d.c. they can work as normally open or normally closed simply by reversing the connection wires. the load can be connected indifferently on the positive or on the negative pole. these sensors put together the four functions of traditional 3 wires amplified sensors besides the a.c. working. in many applications they can replace directly electrome- chanical microswitches. technical data: ? supply voltage (u b ): 10 60 vdc/vac ? electrical system frequency: 40 60 hz ? max ripple: 10% ? off-state current (i r ): 0,6 ma ? minimum operational current (i m ): 5 ma ? voltage drop (u d ): 4 v ? temperature range: - 20 + 70c ? max thermal drift of sensing distance s r : 10% ? repeat accuracy (r): 2% ? switching hysteresis (h): 10% ? degree of protection: ip67 ? switch status indicator: yellow led ? protected against short-circuit and overload ? suppression of initial false impulse ? class 2 equipment according to iec 536 ? shock and vibration according to en60068-2-27 en60068-2-6 ? electromagnetic compatibility (emc) according to en60947-5-2 housing i-2 ordering references pnp no i + --- rx 1 brown 4 blue nc i + --- rx 4 blue 1 brown npn no i 4 blue 1 brown rx --- + nc i 1 brown 4 blue rx --- + housing flush mounting non flush mounting female connector body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm mm nominal sensing distance ( s n ) 10% mm i -12 i -12 i - 2 i - 2 - 10 - 15 50 50 65 50 19 19 17 17 8 8 8 8 77 87 90 90 n 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 5 8 10 15 dx18/435xks dx18/535xks dx30/435xks dx30/535xks diameter max tightening torque nm nut m18 x 1 m30 x 1,5 size sw24 sw36 thickness mm 4 5 35 80 materials: ? housing: nickel plated brass ? sensing face: plastic ? ? ? ? a.c. no i 4 blue 1 brown bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-52 cylindrical inductive sensors in metal housing catalogo inglese 3 (a45-a90) ok 23-01-2007 13:32 pagina a-52 www..net
max switching frequency ( f ) in d.c. hz rated operational current ( i e ) ma 1000 800 800 600 800 400 400 200 max switching frequency ( f ) in a.c. hz 25 25 25 25 25 25 25 25 100 100 100 100 200 200 200 200 voltage 10 50 v ? amplified in d.c. + a.c. 2 wires ? cable output ? l1 l2 l3 l5 led d housing b-6 l1 l2 l3 l5 led d general features: these sensors are able to work with either direct or alternate current. voltage drop and residual current are very low. they are not polarized and the load can be con- nected on both the leads. in many applications they can used to replace mechanical microswitches. technical data: supply voltage (u b ): 10 50 vdc/vac electrical system frequency: 40 60 hz off-state current (i r ): 1 ma minimum operational current (i m ): 5 ma voltage drop (u d ): 5 v temperature range: - 25 + 70? max thermal drift of sensing distance s r : 10% repeat accuracy (r): 2% switching hysteresis (h): 10% degree of protection: ip67 switch status indicator: yellow led cable conductor cross section: 0,35 mm 2 on 8 and 12 mm 0,50 mm 2 on 18 mm 0,75 mm 2 on 30 mm protected against short-circuit and overload (versions with letter k) suppression of initial false impulse electromagnetic compatibility (emc) according to en60947-5-2 shock and vibration resistance according to en60068-2-27 en60068-2-6 housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm mm mm nominal sensing distance ( s n ) 10% mm ordering references no i black black b - 6 b - 6 b - 3 b - 3 c c g g - 5 - 7 - 10 - 15 40 35 43 36 58 48 50 35 5 5 7 7 12 12 10 10 - - - - - - - - 45 45 50 50 70 70 60 60 4 4 4 4 5 5 6 6 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 1,5 2,5 2 4 5 8 10 15 axm8/4600s axm8/5600s axm12/4600ks axm12/5600ks axm18/4600ks axm18/5600ks axm30/4600ks axm30/5600ks nc i black black axm8/4610s axm8/5610s axm12/4610ks axm12/5610ks axm18/4610ks axm18/5610ks axm30/4610ks axm30/5610ks housing b-3 d l1 l5 l2 l3 led housing c l1 l2 l3 l5 led d housing g diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 materials: cable: 2 m pvc cei 20 - 22 ii; 90?; 300 v; o.r. housing 8 mm: stainless steel housing 12 - 18 - 30 mm: nickel plated brass sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-53 cylindrical inductive sensors in metal housing a053 9-02-2007 9:02 pagina a-53 www..net
hz hz 1000 800 800 600 800 400 400 200 25 25 25 25 25 25 25 25 max switching frequency ( f ) in a.c. ma 100 100 100 100 200 200 200 200 rated operational current ( i e ) max switching frequency ( f ) in d.c. ordering references ? supply 10 50 v ? amplified in d.c. + a.c. ? connector output m12 x 1 mm mm mm mm mm n mm mm no i 3 blue 4 black nc i 1 brown 2 white i - 11 i - 11 i - 7 i - 7 i - 12 i - 12 i - 2 i - 2 ? ? ? ? ? ? ? ? - 5 - 7 - 10 - 15 40 35 43 36 50 50 65 50 12 12 15 15 19 19 17 17 8 8 8 8 8 8 8 8 60 60 66 66 77 87 90 90 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 6 - 8b -10 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 1,5 2,5 2 4 5 8 10 15 axm8/4300s axm8/5300s axm12/4300ks axm12/5300ks axm18/4300ks axm18/5300ks axm30/4300ks axm30/5300ks axm8/4310s axm8/5310s axm12/4310ks axm12/5310ks axm18/4310ks axm18/5310ks axm30/4310ks axm30/5310ks housing flush mounting non flush mounting female connector body diameter ( d ) l1 l2 l3 l4 l5 nominal sensing distance ( s n ) 10% general features: these sensors are able to work with either direct or alternate current. voltage drop and residual current are very low. they are not polarized and the load can be con- nected on both the leads. in many applications they can used to replace mechanical microswitches. technical data: ? supply voltage (u b ): 10 50 vdc/vac ? electrical system frequency: 40 60 hz ? off-state current (i r ): 1 ma ? minimum operational current (i m ): 5 ma ? voltage drop (u d ): 5 v ? temperature range: - 25 + 70c ? max thermal drift of sensing distance s r : 10% ? repeat accuracy (r): 2% ? switching hysteresis (h): 10% ? degree of protection: ip67 ? switch status indicator: yellow led ? protected against short-circuit and overload (versions with letter k) ? suppression of initial false impulse ? electromagnetic compatibility (emc) according to en60947-5-2 ? shock and vibration resistance according to en60068-2-27 en60068-2-6 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-7 housing i-12 d l1 l5 l2 l3 m12 x 1 l4 4 x led 3 4 2 1 housing i-2 d l1 l5 l2 l4 m12 x 1 l3 4 x led 3 4 2 1 housing i-11 materials: ? housing 8 mm: stainless steel ? housing 12 - 18 - 30 mm: nickel plated brass ? sensing face: plastic diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-54 cylindrical inductive sensors in metal housing catalogo inglese 3 (a45-a90) ok 23-01-2007 13:32 pagina a-54 www..net
max switching frequency ( f ) in d.c. hz rated operational current ( i e ) ma 1000 800 800 600 800 400 400 200 max switching frequency ( f ) in a.c. hz 25 25 25 25 25 25 25 25 100 100 100 100 200 200 200 200 general features: these sensors are able to work with either direct or alternate current. voltage drop and residual current are very low. they are not polarized and the load can be con- nected on both the leads. in many applications they can used to replace mechanical microswitches. technical data: ? supply voltage (u b ): 20 240 vdc/vac ? electrical system frequency: 40 60 hz ? off-state current (i r ) at 24 v: 1 ma ? off-state current (i r ) at 220 v: 1,5 ma ? minimum operational current (i m ): 5 ma ? voltage drop (u d ): 5 v ? temperature range: - 25 + 70c ? max thermal drift of sensing distance s r : 10% ? repeat accuracy (r): 2% ? switching hysteresis (h): 10% ? degree of protection: ip67 ? switch status indicator: yellow led ? cable conductor cross section: 0,35 mm 2 on 8 and 12 mm 0,50 mm 2 on 18 mm 0,75 mm 2 on 30 mm ? protected against short-circuit and overload (versions with letter k) ? suppression of initial false impulse ? class 2 equipment according to iec 536 ? shock and vibration according to en60068-2-27 en60068-2-6 ? electromagnetic compatibility (emc) according to en60947-5-2 l1 l2 l3 l5 led d l1 l2 l3 l5 led d l1 l2 l5 led d l1 l2 l3 l5 led d voltage 20 240 v ? amplified in d.c. + a.c. 2 wires ? cable output ? housing flush mounting non flush mounting cable diameter body diameter ( d ) l1 mm l2 mm l3 mm l4 mm l5 mm mm mm nominal sensing distance ( s n ) 10% mm ordering references no i black black b - 6 b - 6 b - 3 b - 3 b - 2 b - 2 g g ? ? ? ? ? ? ? ? - 5 - 7 - 10 - 15 40 35 43 36 50 40 50 35 5 5 7 7 - - 10 10 - - - - - - - - 45 45 50 50 50 50 60 60 3,5 3,5 4 4 5 5 6 6 m8 x 1 m8 x 1 m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 1,5 2,5 2 4 5 8 10 15 ax8/4609s ax8/5609s ax12/4609ks ax12/5609ks ax18/4a09ks ax18/5a09ks ax30/4609ks ax30/5609ks nc i black black ax8/4619s ax8/5619s ax12/4619ks ax12/5619ks ax18/4a19ks ax18/5a19ks ax30/4619ks ax30/5619ks housing b-6 housing b-3 housing b-2 housing g diameter max tightening torque nm nut m8 x 1 m12 x 1 m18 x 1 m30 x 1,5 size sw13 sw17 sw24 thickness mm 4 4 4 10 15 35 sw36 5 80 materials: ? cable: 2 m pvc cei 20 - 22 ii; 90c; 300 v; o.r. ? housing 8 mm: stainless steel ? housing 12 -18 - 30 mm: nickel plated brass ? sensing face: plastic bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-55 cylindrical inductive sensors in metal housing catalogo inglese 3 (a45-a90) ok 23-01-2007 13:32 pagina a-55 www..net
max switching frequency ( f ) in d.c. hz rated operational current ( i e ) ma 800 600 800 400 400 200 max switching frequency ( f ) in a.c. hz 25 25 25 25 25 25 100 100 200 200 200 200 body diameter ( d ) female connector ? voltage 20 240 v ? amplified in d.c. + a.c. ? connector output m12 x 1 general features: these sensors are able to work with either direct or alternate current. voltage drop and residual current are very low. they are not polarized and the load can be con- nected on both the leads. in many applications they can used to replace mechanical microswitches. technical data: ? supply voltage (u b ): 20 240 vdc/vac ? electrical system frequency: 40 60 hz ? off-state current (i r ) at 24 v: 1 ma ? off-state current (i r ) at 220 v: 1,5 ma ? minimum operational current (i m ): 5 ma ? voltage drop (u d ): 5 v ? temperature range: - 25 + 70c ? max thermal drift of sensing distance s r : 10% ? repeat accuracy (r): 2% ? switching hysteresis (h): 10% ? degree of protection: ip67 ? switch status indicator: yellow led ? protected against short-circuit and overload ? suppression of initial false impulse ? class 2 equipment according to iec 536 ? shock and vibration according to en60068-2-27 en60068-2-6 ? electromagnetic compatibility (emc) according to en60947-5-2 housing flush mounting non flush mounting l1 mm l2 mm l3 mm l4 mm l5 mm mm nominal sensing distance ( s n ) 10% mm ordering references no i 3 blue 2 brown 1 yellow-green a - 7 a - 7 a - 1 a - 1 a - 2 a - 2 ? ? ? ? ? ? - 7 - 10 - 15 43 36 50 50 65 50 15 15 19 19 17 17 8 8 8 8 8 8 66 66 77 87 90 90 n 17-18 17-18 17-18 17-18 17-18 17-18 2 4 5 8 10 15 ax12/4009ks ax12/5009ks ax18/4009ks ax18/5009ks ax30/4009ks ax30/5009ks nc i 3 blue 2 brown 1 yellow-green ax12/4019ks ax12/5019ks ax18/4019ks ax18/5019ks ax30/4019ks ax30/5019ks m12 x 1 m12 x 1 m18 x 1 m18 x 1 m30 x 1,5 m30 x 1,5 d l1 l5 l2 l4 led m12 x 1 l3 3 2 1 housing a-7 d l1 l5 l2 l4 m12 x 1 l3 led 3 2 1 housing a-1 3 2 1 d l1 l5 l2 l3 m12 x 1 l4 led housing a-2 materials: ? housing: nickel plated brass ? sensing face: plastic max tightening torque nm nut m12x 1 m18 x 1 m30 x 1,5 size sw17 sw24 sw36 thickness mm 4 4 5 15 35 80 diameter bdc electronic - viale lidice, 37/39 - 10095 grugliasco (to) - italy -tel. (+39)011.31.49.021/022 fax (+39) 011.31.49.023 - www.bdcelectronic. com - e-mail:bdc@bdcelectronic.com a-56 cylindrical inductive sensors in metal housing catalogo inglese 3 (a45-a90) ok 23-01-2007 13:32 pagina a-56 www..net
|
