Part Number Hot Search : 
AAT3170 LUR21233 ESDB24C FSS275 SDB12 MSZ52 090663 B32620
Product Description
Full Text Search
 

To Download JCK Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  web-site: www.jbcapacitors.com e-mail: info@jbcapacitors.com tel : (852)2790 5091 fax: (852)8169 8283 smd aluminum electrolytic capacitor ? JCK ? features ? chip type, operating with wide temperature range -40~+105 . ? load life of 1,000~2,000 hours ? designed for surface mounting on high density circuit board. ? emboss carrier tape packing system is available for automatic insertion. ? specifications ? operating temperature -40 ~ +105 ? voltage range 4v ~ 100v.dc ? capacitance range 0.1 ~ 470 f ? capacitance tolerance 20% at 120hz, 20 ? leakage current leakage current ( 4~ 8x6.2) 0.01cv or 3 a, whichever is greater. (after 2 minutes application of rated voltage) ? dissipation factor (tan ) measurement frequency: 120hz, temperature: 20 rated voltage (v) 4 6.3 10 16 25 35 50 63 100 tan (max) 4~ 8x6.2 0.35 0.26 0.20 0.16 0.14 0.12 0.12 0.12 0.12 ? stability at low temp. measurement frequency: 120hz rated voltage (v) 4 6.3 10 16 25 35 50~63 100 impedance ratio 4~ 8x6.2 z-25 / z+20 7 4 3 2 2 2 2 3 z-40 / z+20 15 8 6 4 4 3 3 4 ? load life after 2000 hours (1000hrs. for 4~ 6.3x5.4) application of rated voltage at 105 , capacitors meet the characteristics requirements listed below. capacitance change within 20% of initial value for capacitors of 10v or more dissipation factor 200% or less of initial specified value leakage current initial specified value or less ? self life after leaving capacitors under no load at 105 for 1000 hours, they meet the specified value for load life characteristics listed above. ? resistance to soldering heat after reflow soldering and restored at room temper ature, they meet the characteristics listed below. capacitance change within 10% of initial value ta n initial specified value or less leakage current initial specified value or less ? drawing #1 voltage mark for 6.3v is [6v] #2 applicable to 6.3 x 7.7 (mm) dxl 4x5.4 5x5.4 6.3x5.4 6.3x7.7 8x6.2 a 1.8 2.1 2.4 2.4 3.3 b 4.3 5.3 6.6 6.6 8.3 c 4.3 5.3 6.6 6.6 8.3 e0.2 1.0 1.3 2.2 2.2 2.2 l 5.4 5.4 5.4 7.7 6.2 please visit our website to get more update data, those data & specification are subject to change without notice.
web-site: www.jbcapacitors.com e-mail: info@jbcapacitors.com tel : (852)2790 5091 fax: (852)8169 8283 smd aluminum electrolytic capacitor ? JCK ? frequency coefficient of allowable ripple current fre q uenc y 50hz 120hz 300hz 1khz 10khz~ coefficient 4~ 8x6.2 0.1~68uf 0.70 1.00 1.17 1.36 1.50 100~470uf 0.85 1.00 1.08 1.2 1.30 ? standard size wv/v cap/ f 4 6.3 10 16 25 35 50 0g 0j 1a 1c 1e 1v 1h 0.1 0r1 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 0.7 0.22 r22 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 1.6 0.33 r33 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 2.5 0.47 r47 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 3.5 1 010 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 7 2.2 2r2 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 11 3.3 3r3 -- -- -- -- -- -- -- -- -- -- -- -- 45.4 13 4.7 4r7 -- -- -- -- -- -- -- -- -- -- -- -- 55.4 (45.4) 16 (13) 10 100 -- -- -- -- -- -- 45.4 18 55.4 (45.4) 20 (14) 55.4 (45.4) 21 (14) 6.35.4 24 22 220 -- -- 45.4 22 55.4 (45.4) 25 (20) 55.4 (45.4) 27 (20) 6.35.4 (55.4) 36 (25) 6.35.4 38 6.37.7 (6.35.4) ( 8 x 6.2 ) 51 (42) ( 70 ) 33 330 55.4 ( 45.4 ) 30 ( 18 ) 55.4 ( 45.4 ) 27 ( 22 ) 55.4 ( 45.4 ) 30 ( 22 ) 6.35.4 ( 55.4 ) 40 ( 28 ) 6.35.4 ( 55.4 ) 44 ( 29 ) 6.35.4 ( 8 x 6.2 ) 42 ( 84 ) 6.37.7 60 47 470 55.4 ( 45.4 ) 36 ( 24 ) 55.4 ( 45.4 ) 33 ( 25 ) 6.35.4 ( 55.4 ) 41 ( 30 ) 6.35.4 ( 55.4 ) 48 ( 31 ) 6.35.4 ( 8 x 6.2 ) 48 ( 91 ) 6.37.7 ( 6.35.8 ) 70 ( 50 ) 810.5 ( 6.37.7 ) 120 ( 63 ) 100 101 6.35.4 ( 55.4 ) 60 ( 43 ) 6.35.4 ( 55.4 ) 50 ( 39 ) 6.35.4 ( 86.2 ) 53 ( 110 ) 6.35.4 ( 8 x 6.2 ) 60 ( 120 ) 6.37.7 91 810.5 ( 6.37.7 ) 120 ( 84 ) 1010.5 ( 810.5 ) 170 ( 140 ) 150 151 6.35.4 52 6.35.4 55 6.35.4 62 6.37.7 95 810.5 ( 6.37.7 ) 140 ( 100 ) 810.5 155 1010.5 170 220 221 6.35.4 57 6.37.7 (6.35.8) 105 (67) 6.3x5.8 6.37.7 ( 86.2 ) 67 105 ( 105 ) 810.5 (6.37.7) ( 8 x 6.2 ) 150 (105) ( 85 ) 810.5 175 1010.5 (810.5) 220 (190) 10 x 13.5 (1010.5) 280 (220) 330 331 6.37.7 100 6.37.7 105 810.5 196 810.5 195 1010.5 (810.5) 240 (220) 1010.5 245 16x16.5 (12.5x13.5) (10x13.5) 600 (420) (295) 470 471 6.37.7 105 810.5 (6.37.7) 210 (120) 1010.5 (810.5) 260 (210) 1010.5 (810.5) 295 (230) 1010.5 280 12.5x13.5 (10x13.5) ( 1010.5 ) 520 (375) ( 280 ) 16x16.5 (12.5x16) 700 (520) 680 681 810.5 210 810.5 210 1010.5 270 1010.5 315 10 x 13.5 400 12.5x13.5 ( 10x13.5 ) 530 ( 395 ) 16x16.5 750 1000 102 810.5 230 1010.5 (810.5) 300 (230) 1010.5 315 12.5x13.5 (10x13.5) ( 1010.5 ) 500 (390) ( 340 ) 12.5x13.5 580 16x16.5 (12.5x16) 750 (600) 16x21.5 1000 1500 152 1010.5 315 10 x 13.5 ( 1010.5 ) 450 ( 315 ) 1013.5 460 12.5x13.5 550 12.5x16 850 -- -- -- -- 2200 222 10 x 13.5 ( 1010.5 ) 440 ( 340 ) 12.5x13.5 ( 10x13.5 ) 620 ( 500 ) 12.5x13.5 680 16x16.5 ( 12.5x16 ) 950 ( 750 ) 16x16.5 16x21.5 1050 1250 16x21.5 1300 -- -- 3300 333 10 x 13.5 490 12.5x16 ( 12.5x13.5 ) 700 ( 660 ) 16x16.5 1000 16x16.5 16x21.5 1000 1200 16x21.5 1400 -- -- -- -- 4700 472 12.5x13.5 600 16x16.5 16x21.5 1000 1200 16x21.5 1300 16x21.5 1350 -- -- -- -- -- -- 6800 682 16x16.5 ( 12.5x16 ) 950 ( 650 ) 16x21.5 1250 -- -- -- -- -- -- -- -- -- -- 10000 103 16x21.5 250 -- -- -- -- -- --- -- -- -- -- -- -- wv/v cap/ f 63 100 1j 2a 0.1 0r1 45.4 0.7 -- -- 0.22 r22 45.4 1.6 -- -- 0.33 r33 45.4 2.5 -- -- 0.47 r47 45.4 3.5 -- -- 1 010 45.4 7 45.4 7 2.2 2r2 45.4 11 6.35.4 14 3.3 3r3 55.4 13 6.37.7 (6.35.4) ( 86.2 ) 32 (20) ( 30 ) 4.7 4r7 55.4 16 6.37.7 ( 6.35.4 ) 35 ( 21 ) 10 100 6.37.7 (6.35.4) (8 x 6.2) 39 (24) (25) 810.5 (6.37.7) 77 (35) 22 220 810.5 (6.37.7) 98 (49) 1010.5 (810.5) 126 (84) 33 330 810.5 112 1010.5 133 47 470 1010.5 (810.5) 160 (119) 12.513.5 (1013.5) (1010.5) 250 (160) (140) 68 680 -- -- 12.513.5 (1013.5) 300 (180) 100 101 12.5x13.5 (10.5x13.5) ( 1010.5 ) 270 (210) ( 196 ) 16x16.5 (12.5x13.5) 450 (380) 150 151 10 x 13.5 225 220 221 16x16.5 (12.5x13.5) (10x13.5) 560 (470) (235) 16x16.5 16x21.5 550 750 330 331 16x16.5 (12.5x16) 700 (510) 16x21.6 800 470 471 16x16.5 16x21.5 750 900 680 681 16x21.5 950 case size allowable ripple please visit our website to get more update data, those data & specification are subject to change without notice.


▲Up To Search▲   

 
Price & Availability of JCK

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X