df-52013:a ? 02/05/2008 ? page 1 of 2 BG-12LX addressable manual pull station addressable df-52013:a ? e-100 52004p4c.jpg general the firelite BG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface (mounted inside) for firelite?s addressable fire alarm control panels (facps). because the BG-12LX is addressable, the control panel can display the exact location of the activated manual station. this leads fire personnel quickly to the location of the alarm. features ? maintenance personnel can open station for inspection and address setting without causing an alarm condition. ? built-in bicolor led, which is visible through the handle of the station, flashes in normal operation and latches steady red when in alarm. ? handle latches in down position and the word ?activated? appears to clearly indicate the station has been operated. ? captive screw terminals wire-ready for easy connection to slc loop (accepts up to 12 awg/3.25 mm2 wire). ? can be surface mounted (with sb-10 or sb-i/o) or semi- flush mounted. semi-flush mount to a standard single- gang, double-gang, or 4" (10.16 cm) square electrical box. ? smooth dual-action design. ? meets adaag controls and operating mechanicsms guide- lines (section 4.1.3[13]); meets ada requirement for 5 lb. maximum activation force. ? highly visible. ? attractive shape and textured finish. ? key reset. ? includes braille text on station handle. ? optional trim ring (bg12tr). ? meets ul 38, standard for manually actuated signaling boxes. construction shell, door, and handle are molded of durable lexan? (or polycarbonate equivalent) with a textured finish. specifications ? normal operating voltage: 24 vdc. ? maximum slc loop voltage: 28.0 vdc. ? maximum slc loop current: 230 a. ? ambient temperature: 32f to 120f (0c to 49c) ? relative humidity: 93% 2% rh (noncondensing) at 32c 2c (90f 3f) ? for use indoors in a dry location installation the BG-12LX will mount semi-flush into a single-gang, double- gang, or standard 4" (10.16 cm) square electrical outlet box, or will surface mount to the model sb-10 or sb-i/o surface back- box. if the BG-12LX is being semi-flush mounted, then the optional trim ring (bg12tr) may be used. the bg12tr is usually needed for semi-flush mounting with 4" (10.16 cm) or double-gang boxes (not with single-gang boxes). operation pushing in, then pulling down on the handle causes it to latch in the down/activated position. once latched, the word ?acti- vated? (in bright yellow) appears at the top of the handle, while a portion of the handle protrudes from the bottom of the station. to reset the station, simply unlock the station with the key and pull the door open. this action resets the handle; clos- ing the door automatically resets the switch. each manual station, on command from the control panel, sends data to the panel representing the state of the manual switch. two rotary decimal switches allow address settings (1 ? 159 with breakaway tab removed for ms-9600, 1 ? 99 and ms-9200udls, 1 ? 50 for ms-9050ud). architectural/engineering specifications manual fire alarm stations shall be non-coded, with a key- operated reset lock in order that they may be tested, and so designed that after actual emergency operation, they cannot be restored to normal except by use of a key. an operated sta- tion shall automatically condition itself so as to be visually detected as activated. manual stations shall be constructed of red-colored lexan (or polycarbonate equivalent) with clearly visible operating instructions provided on the cover. the word fire shall appear on the front of the stations in white letters, 1.00 inches (2.54 cm) or larger. stations shall be suitable for surface mounting on matching backbox sb-10 or sb-i/o; or semi-flush mounting on a standard single-gang, double-gang, or 4" (10.16 cm) square electrical box, and shall be installed within the limits defined by the americans with disabilities act (ada) or per national/local requirements. manual stations shall be underwriters laboratories listed.
page 2 of 2 ? df-52013:a ? 02/05/2008 this document is not intended to be used for installation purposes. we try to keep our product information up-to-date and accurate. we cannot cover all specific applications or anticipate all requirements. all specifications are subject to change without notice. for more information, contact fire?lite alarms. phone: (800) 627-3473, fax: (877) 699-4105. www.firelite.com firelite is a registered trademark of honeywell international inc. lexan? is a registered trademark of ge plas tics, a subsidiary of general electric company. ?2008 by honeywell international inc. all rights reserved. unauthorized use of this document is strictly prohibited. made in the u.s. a. manual stations shall connect with two wires to one of the con- trol panel slc loops. the manual station shall, on command from the control panel, send data to the panel representing the state of the manual switch. manual stations shall provide address setting by use of rotary decimal switches. product line information BG-12LX: dual-action addressable pull station. includes key locking feature. sb-10: surface backbox; metal. sb-i/o: surface backbox; plastic. bg12tr: optional trim ring. 17003: keys, set of two. agency listings and approvals in some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in pro- cess. consult factory for latest listing status. ? ul listed: s711 ? mea: 67-02-e ? csfm: 7150-0075:184 ? fm approved patented: u.s. patent no. d428,351; 6,380,846; 6,314,772; 6,632,108. back of station without door terminal connections: 1 slc (-); 2 slc (+) 6726back.wmf cover open to show easy access to miniature monitor module, rotary switch, and ul label. 6726openg.wmf * remove tab to select addresses above 99. 6726rtsw.wmf
|
