EGF1A thru egf1d 50v-200v 1.0a 1 of 2 web site: www.taychipst.com features e-mail: sales@taychipst.com maximum ratings and electrical characteristics mechanical data plastic package has underwriters laboratory flammability classification 94v-0 ideal for surface mount automotive applications high temperature metallurgically bonded construction superfast recovery times for high efficiency glass passivated cavity-free junction built-in strain relief easy pick and place high temperature soldering guaranteed: 450c/5 seconds at terminals complete device submersible temperature of 265c for 10 seconds in solder bath case: jedec do-214ba molded plastic over glass body terminals: solder plated, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end weight : 0.0048 ounces, 0.120 gram ratings at 25c ambient temperature unless otherwise specified. symbols EGF1A egf1b egf1c egf1d units device marking code ea eb ec ed maximum repetitive peak reverse voltage v rrm 50 100 150 200 volts maximum rms voltage v rms 35 70 105 140 volts maximum dc blocking voltage v dc 50 100 150 200 volts maximum average forward rectified current at t l =125c i (av) 1.0 amps peak forward surge current 8.3ms single half sine-wave superimposed on i fsm 30.0 amps rated load (jedec method) maximum instantaneous forward voltage at 1.0a v f 1.0 volts maximum dc reverse current t a =25c 5.0 at rated dc blocking voltage t a =125c i r 50.0 m a typical reverse recovery time (note 1) t rr 50.0 ns typical junction capacitance (note 2) c j 15.0 pf typical thermal resistance (note 3) r q ja 85.0 r q jl 30.0 c/w operating junction and storage temperature range t j ,t stg -65 to +175 c notes: (1) reverse recovery test conditions: i f =0.5a, i r =1.0a, irr=0.25a (2) measured at 1.0 mhz and applied v r =4.0 volts (3) thermal resistance from junction to ambient and from junction to lead p.c.b. mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pad areas ultrafast surface mount rectifier
EGF1A thru egf1d 2 of 2 web site: www.taychipst.com e-mail: sales@taychipst.com 50v-200v 1.0a ultrafast surface mount rectifier 175 0100 0 0.5 1.0 25 50 75 125 150 20 80 0.1 10 100 0 40 60 100 1,000 0 1 1 10 5.0 10 20 100 0 15 25 30 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.01 0.1 1 10 50 0.01 0.1 1 10 100 0.1 1 10 100 0.1 1 10 100 0 10 20 30 40 50 60 70 ratings and characteristics curves EGF1A thru egf1d fig. 1 - maximum forward current derating curve lead temperature, c average forward rectified current, amperes resistive or inductive load p.c.b. mounted on 0.2 x 0.2 (5.0 x 5.0mm) copper pad areas fig. 4 - typical reverse characteristics instantaneous reverse leakage current, microamperes percent of rated peak reverse voltage, % t j =25c t j =150c pulse width=300 m s 1% duty cycle fig. 3 -typical instantaneous forward characteristics instantaneous forward voltage, volts instantaneous forward current, amperes t j =t j max. 8.3ms single half sine wave (jedec method) fig. 2 - maximum non-repetitive peak forward surge current peak forward surge current, amperes fig. 6 - typical transient thermal impedance t, pulse duration, sec. transient thermal impedance, c/w t j =25 c f=1.0 mhz vsig=50mvp-p t j =150c t j =100c t j =25c number of cycles at 60 h z fig. 5 - typical junction capacitance junction capacitance, pf reverse voltage, volts
|