5 energy way, p.o. box 1019, west warwick, ri 02893 usa tel. 800-424-9850/401-823-5200 ?fax 401-823-8723 ?email info@advint corp.com ?internet http://www.advintcorp.com inch/(mm ) products shown covered by patents issued and/or pending. specifications subject to change without notice. page 4 ball grid array (bga) adapters features : ?s oldering bga device to adapter subjects bga to less thermal stress than soldering bga directly to a pcb due to the adapters lower mass. ? uses same footprint as bga device. ? custom adapters available for heat sink attachment. t erminals: brass - copper alloy (c36000), astm-b-16 plating: g - gold over nickel body material: fr-4 glass epoxy, u.l. rated 94v-o how it works: standard adapter (a): ?m ates with standard socket (s) ?a dapter size equals bga device body + .079/(2.0) bga adapters how to order 1 f g a xxx -638 g footprint dash# if applicable* terminal plating g - gold terminal type body type f - fr-4 model type a = standard adapter ax = extraction slot adapter (1.5, 1.27, 1.0mm pitch only) pitch b = .059/(1.5mm) g = .050/(1.27mm) h = .039/(1.0mm) j = .0315/(0.80mm) k = .0295/(0.75mm) number of positions *see bga footprint section or web site 1.27mm & 1.5mm pitch type -638 .018 (0.46) dia. .182 (4.62) 1.0mm pitch type -715 .011/(0.28) dia. .159 (4.04) 0.80mm pitch type -700 .011 (0.28)dia. .146 (3.71) 0.75mm pitch type -757 .008 (0.20)dia. .142 (3.61) bga body + .079/(2.0) bga device .039/(1.0) extraction slot adapter (ax): ?s lots allow aic extraction tool (sold separately) to easily remove device/ adapter assembly from socket. ?m ates with extraction socket (sb) or guide post socket (sg) ?a dapter size equals the bga device body + .157/(4.0) bga device bga body + .157/(4.0) .079/(2.0) bga adapter extraction tool: ?i nsert t bar end of tool into extraction slot adapter. ?s lide tool to end of slot and pry adapter from socket. ? repeat in additional slots until adapter is separated from socket. blade width tool p/n 5566 5504 .373/(9.5mm) .675/(17.1mm) blade width device package size < 1.024 (26mm) > 1.024 (26mm) p/n 5566 p/n 5504 t erminals device adapter socket pc board reflow (solder) bga device to adapter reflow (solder) socket to pcb
|