front and back views of the Z-D250CWA. note that in-line filter can be removed from wall-mount housing, giving subscribers without wall-mount phones an additional in-line filter . www.pulseeng.com ex129.a (9/09) z-blocker? Z-D250CWA dual-line wall-mount filter description the Z-D250CWA is a compact, dual-line, wall- mount customer premises equipment (cpe) flter de - signed to expedite the service delivery and improve the performance of digital subscriber line (dsl) and home phoneline network (hpn) services over plain old telephone service (pots). the Z-D250CWA flters all telephones, facsimile (fax) machines, an - swering machines, and other telephone equipment. its flter design electronically isolates the high-speed dsl and hpn data streams from the voice-band pots to provide premium voice quality and optimal dsl and hpn data rates. the Z-D250CWA flters both line 1 and line 2 at a two-line wall jack to reduce crosstalk and interfer - ence that can occur between lines. the flter also provides a convenience jack for dsl or hpn con - nections. the wall-mount flter allows two-line fltering of both the wall phone and a second phone device, such as an answering or fax machine. applications installation of the Z-D250CWA wall-mount flter is quick and easy. the dsl user simply removes and disconnects the wall phone, connects and aligns the Z-D250CWA flter with the mounting screws of the wall plate, pushes the locking tabs in place, and reconnects and attaches the wall phone. the dsl user installs an excelsus flter into each telephone line jack in the subscribers premises that contains voice-band equipment devices, including corded/cordless telephones, answering machines, fax machines, 56kb/s and lower rate modems, automatic dialers, recorder connectors and satellite television set-top boxes. the Z-D250CWA dual-line wall-mount flter is one of many flters manufactured by excelsus for subscriber installed digital services within homes, offces, and hotels. excelsus is the number one selling brand of dsl flters worldwide. features filters both lines at a two-line wall jack provides fltered connections for up to two phone devices isolate telephone equipment impedances from the xdsl and hpn systems blocks xdsl and hpn signals from voice-band equipment provides a dsl convenience jack for connecting a dsl modem or hpn device compatible with all major xdsl standards including adsl full rate (itu-t g.992.1), adsl g.lite (itu-t g.992.2), adsl2 (itu- t g.992.3 and .4), adsl2+ (itu-t g.992.5 in analog mode), adsl2++, vdsl (itu-tg.993.1), vdsl2; also v.90 and metallic loop testing compatible ul / csa 60950, fcc cfr 47 part 68, and ic cs-03
12220 world trade drive, san diego, ca 92128 usa direct: 858 674 8100, fax: 858-385-8003 www.excelsus-tech.com specifications subject to change without notice. excelsus is a registered trade mark of pulse engineering, inc. ? 2009 pulse engineering, inc. ex129.a (9/09) z-blocker? Z-D250CWA dual-line wall-mount filter capacitance to ground <0.2nf dc resistance network port at 20ma <20 tip and ring to ground at 100 vdc >500 m tip and ring to ground at 100 vdc and 200 vdc >500 m operating current 5 to 90 ma operating voltages network tip to ring 0 to -100 vdc network ringing signals at 30 to 115 vrms C100 to +100 vdc on-hook voice band insertion loss at 1004hz with 1 flter -0.5db to 2.2db with 3 flters -1.0db to 6.5db with 5 flters -1.0db to 6.5db on- or off-hook envelope delay 300 hz - 2800 hz <250s off-hook voice band insertion loss at 1004hz with 1 flter -0.5db to 0.5db with 3 flters -1.0db to 1.0db with 5 flters -1.0db to 1.0db off-hook voice band insertion loss distortion with 1 flter, 200 to 3400 hz -1.0db to 0.5db with 3 flters, 200 to 3400 hz -1.5db to 2.5db with 5 flters, 200 to 3400 hz -1.5db to 2.5db with 1 flter, 3.4 to 4 khz -1.5db to 1.0db with 3 flters, 3.4 to 4 khz -2.0db to 3.5db with 5 flters, 3.4 to 4 khz -2.0db to 3.5db off-hook impedance distortion (5 flters) phone port srl low 13 db erl 6.5 db srl high 1 db network port srl low 12 db erl 10 db srl high 5 db inter-modulation distortion second and third order products 57 db and 60 db, respectively off-hook high band stopband attenuation (1 flter) 25 khz to 50 khz, between 20 and 90 ma 17 db 50 khz to 12 mhz, between 20 and 90 ma 25 db bridging loss with 1 flter, 25 khz to 1.2 mhz 0.5 db with 5 flters, 25 khz to 1.2 mhz 1.25 db with 1 flter, 1.2 to 12 mhz 3.0 db with 5 flters, 1.2 to 12 mhz 4.0 db connectors: two rj11 jacks for phone connections, one rj11 jack for dsl/hpn connection, and one rj11 plug on a 4 cord for line connection dimensions: height = 4.5in (114mm), width = 3.0in (76.2mm), depth = 0.91in (23.1mm) weight: approx. 80g ul / csa 60950, fcc cfr 47 part 68, and ic cs-03 z-blocker z-d250p2j filter specifications
|
