ta www.vishay.com vishay dale revision: 06-dec-11 1 document number: 34076 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 through-hole transformers audio, telephone coupling features ? designed to meet fcc part 68. ? underwriters laboratories recognized component (ul standard 1459, file e147915) ? canadian standards association certified component (csa standard c22.2, file lr77313) ? provide line isolation, impedance ma tching and line balance ? designed and built to meet telephone company requirements for data and voice access on leased private telephone lines or through dial-up switched telephone networks ? compliant to rohs directive 2002/95/ec note (1) reference for ta-40-01 is 1.8 khz. model ta -3 is the low-cost alternative to model ta-1. for holding coil information, refer to model te, td. electrical specfications power level: - 45 dbm to + 7 dbm except ta-40-01 (- 45 dbm to + 10 dbm) longitudinal balance: per fcc 68.310 60 db minimum = 200 hz to 1000 hz 45 db minimum = 1000 hz to 4000 hz dielectric strength: 1500 v rms frequency range: data/voice = 300 hz to 3500 hz data = 800 hz to 3500 hz mechanical specifications coating: impregnated with polyester varnish terminals: precision spaced pc type plug-in terminals standard electrical specifications model impedance ( ? ) coupling application unbalanced dc current (ma) return loss min. (db) insertion losses at 1 khz (db) frequency response ref. at 1 khz (db) impedance matching distortion style schematic number pri sec ta-10-08 600 600 data/voice 0 26 1.0 0.5 10 % 0.5 % c 5 ta-10-07 600 600 data/voice 0 26 1.0 0.5 10 % 0.5 % j 5 ta-30-06 600 600 data/voice 0 to 5 14 1.5 1.5 25 % 5.0 % j 5 ta-10-05 600 600 data/voice 0 26 0.6 0.5 10 % 0.5 % b 5 ta-30-02 600 600 data/voice 0 to 5 15 1.4 1.5 25 % 5.0 % b 5 ta-30-03 600 600 data 0 to 90 8 2.4 1.0 25 % 5.0 % g 5 ta-32-02 600 600 data/voice 0 to 80 11 1.2 1.5 25 % 5.0 % m 13 ta-40-01 (1) 600 600 data/voice 0 to 90 14 1.7 2.0 20 % 0.5 % n 13 ta-33-02 600 600 data/voice 0 to 100 8 1.6 1.5 25 % 5.0 % e 15 ta-30-04 600 600 ct data 0 to 90 8 2.4 1.0 25 % 5.0 % h 9 ta-10-04 600 ct 600 ct data/voice 0 26 0.6 0.5 10 % 0.5 % a 4 ta-30-01 600 ct 600 ct data/voice 0 to 5 15 1.4 1.5 25 % 5.0 % a 4 ta-31-01 600 split 600 data/voice 0 to 50 8 1.4 1.5 25 % 5.0 % k 11 ta-32-03 600 split 600 data/voice 0 to 80 11 1.2 1.5 25 % 5.0 % l 14 ta-13-01 600 600 split data/voice 0 to 75 13 1.2 0.5 10 % 0.5 % e 7 ta-33-01 600 600 split data/voice 0 to 100 8 1.6 1.5 25 % 5.0 % e 7 ta-10-01 600 600/600 data/voice hybrid 0 26 0.8 0.5 10 % 0.5 % a 1 ta-30-05 600 600/600 data/voice hybrid 0 to 5 14 1.4 1.5 25 % 5.0 % a 10 ta-11-01 600 600/600 data/voice hybrid 0 26 0.8 0.5 10 % 0.5 % d 1 ta-30-07 600 900 data/voice 0 to 5 14 1.5 1.5 25 % 5.0 % j 2 TA-10-02 600 900 data/voice 0 26 0.7 0.5 10 % 0.5 % b 2 ta-32-01 600/900 600 data/voice 0 to 100/0 to 120 8 1.4 1.5 25 % 5.0 % l 12 ta-14-01 600 600/900 data/voice 0 to 100/0 to 120 14 0.5 0.5 10 % 0.5 % f 8 ta-10-06 900 900 data/voice 0 26 0.7 0.5 10 % 0.5 % a 6 ta-10-03 4k 600 data/voice 0 22 0.7 0.5 10 % 0.5 % b 3 ta-23-01 600 600 split data/voice 0 to 75 13 1.2 0.5 10 % 0.5 % e 16
ta www.vishay.com vishay dale revision: 06-dec-11 2 document number: 34076 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 schematics dimensional configurations [numbers in bracket s indicate millimeters] 1 4 6 3 600 4 k 2 3 8 7 6 5 600 4 5 600 2 3 600 2 3 6 7 600 600 16 600 1 600 600 4 2 5 3 6 4 5 6 600 120madc 900 100madc 1 2 3 shield 600 600 120madc 600 4 2 1 6 5 900 100madc 6 7 4 600 1 2 3 600 5 4 3 2 600 600 1 6 600 300 4 5 6 3 12 300 4 1 900 36 900 4 1 900 600 6 3 600 300 4 5 6 2 3 1 300 600 600 6 3 4 1 3 1 4 600 6 600 5 1 2 3 4 600 600 1. 3. 7. 6. 2. 4. 8. 12. 11 . 10. 9. 5. 13. 14. 15. 16. 0.016 0.010 [0.406 0.254] typ. 0.695 [17.65] max. c. b. a. 3 d. e. 3 1 6 4 0.420 + 0.025 - 0.015 [10.67 + 0.635 - 0.381] 0.375 0.010 [9.53 0.254] 0.780 [19.81] max. black dot indicates pin 1 0.016 0.010 [0.406 0.254] typ. 0.420 + 0.025 - 0.015 [10.67 + 0.635 - 0.381] 4 6 0.187 0.005 [4.75 0.127] 5 12 3 0.780 [19.81] max. black dot indicates pin 1 0.720 [18.29] max. 0.781 [19.84] max. black dot indicates pin 1 top or side 0.025 0.005 [0.635 0.127] sq. typ. 1 3 64 0.469 0.010 [11.91 0.254] 0.469 0 .010 [11.91 .254] 4 65 0.016 0.010 [0.406 0.254] typ. 0.960 [24.38] max. 1 3 2 0.781 + 0.025 - 0.015 [19.84 + 0.635 - 0.381] 0.660 [16.76] max. 1.65 [41.91] max. 0.150 [3.81] min. 0.024 0.005 [0.610 0.127] sq. typ. 2 1 4 0.750 0.010 [19.05 0.254] 0.200 0.010 [5.08 0.254] 1.0 0.020 [25.40 0.508] 1.35 [34.29] max. 0.250 0.010 [6.35 0.254] 7 8 5 6 f. 3 2 1 1.30 + 0.030 - 0.015 [33.02 + 0.762 - 0.381] 1.45 [36.83] max. 2.0 [50.80] max. 0.187 0.010 [4.75 0.254] typ. black dot indicates pin 1 0.695 [17.65] max. 0.375 0.010 [9.53 0.254] notch indicates pin 1 0.720 [18.29] max. 0.040 0.010 [1.02 0.254] typ. 1.94 0.020 [49.28 0.508] 0.400 0.005 [10.16 0.127] 0.800 0.010 [20.32 0.254] 1.68 [42.67] max. 0.040 0.010 [1.02 0.254] typ. 0.150 [3.81] min. 0.400 0.010 [10.16 0.254] 0.200 0.005 [5.08 0.127] black dot indicates pin 1 0.150 [3.81] min. 0.040 0.010 [1.02 0.254] typ. 0.150 [3.81] min. 0.290 [7.37] min. 0.470 [11.94] max. 0.670 [17.02] max. 0.150 [3.81] min. 0.870 [22.10] max. 1.04 [26.42] max. 4 5 6
ta www.vishay.com vishay dale revision: 06-dec-11 3 document number: 34076 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensional configurations [numbers in bracket s indicate millimeters] part marking - vishay dale - date code - model 3 12 k. j. h. g. .016 ? .010 [.406 ? .254] typ. .420 + .025 - .015 [10.67 + .635 - .3 8 1] 4 .695 [17.65] max. 6 1 3 .375 ? .010 [9.53 ? .254] . 8 15 [20.70] max. .040 ? .010 [1.02 ? .254] typ. .750 [19.05] max. 5 2 3 1 6 4 .375 ? .010 [9.53 ? .254] .016 ? .010 [.406 ? .254] typ. .695 [17.65] max. .1 8 7 ? .005 [4.75 ? .127] .420 + .025 - .015 [10.67 + .635 - .3 8 1] .300 ? .010 [7.62 ? .254] 3 4 6 1 .500 ? .015 [12.70 ? .3 8 1] 5 234 1 6 0.900 [22. 8 6] max. 0.7 8 0 ? 0.020 [19. 8 1 ? 0.50 8 ] 0.020 ? 0.005 [0.50 8 ? 0.127] typ. 0.150 ? 0.005 [3. 8 1 ? 0.127] 0.450 ? 0.010 [11.43 ? 0.254] n. l. 0.125 [3.1 8 ] min. 1.41 [35. 8 1] max. 0.950 ? 0.010 [24.13 ? 0.254] 4 3 2 1 6 0.400 ? 0.010 [10.16 ? 0.254] 1.20 [30.4 8 ] max. 0.025 ? 0.005 [0.635 ? 0.127] s q . typ. notch indicates pin 1 0.200 ? 0.005 [5.0 8 ? 0.127] 0. 8 10 ? 0.015 [20.57 ? 0.3 8 1] 1.29 [32.77] max. 5 m. 0.950 ? 0.010 [24.13 ? 0.254] 0. 8 10 ? 0.015 [20.57 ? 0.3 8 1] 1.20 [30.4 8 ] max. 4 0.930 [23.62] max. 0.125 [3.1 8 ] min. 1.41 [35. 8 1] max. 0.025 ? 0.005 [0.635 ? 0.127] s q . typ. .150 [3. 8 1] min. black dot indicates pin 1 . 8 15 [20.70] max. .750 [19.05] max. .040 ? .010 [1.02 ? .254] typ. .150 [3. 8 1] min. black dot indicates pin 1 0. 8 10 [20.57] max. 1.0 8 [27.43] max. 0.025 ? 0.005 [0.635 ? 0.127] typ. 0.200 [5.0 8 ] min. .6 8 0 [17.27] max. 0.930 [23.62] max. 1.0 ? 0.010 [25.40 ? 0.254] 1.29 [32.77] max. 1.0 ? 0.010 [25.40 ? 0.254] notch indicates pin 1 .025 ? .005 [.635 ? .127] s q . typ. .490 [12.45] max. .7 8 1 [19. 8 4] max. .290 [7.37] min. black dot indicates pin 1 top or side 43 0.025 [0.635] s q . typ. 0.950 ? 0.020 [24.13 ? 0.50 8 ] 0.500 [12.70] max. 0.200 ? 0.030 [5.0 8 ? 0.762] 0.400 ? 0.010 [10.16 ? 0.254] 0. 8 00 [20.32] max. 12 1.25 [31.75] max. raised nut indicates pin 1 red color bar
ta www.vishay.com vishay dale revision: 06-dec-11 4 document number: 34076 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information ta 10 01 eb e2 model style dash number package code jedec lead (pb)-free standard global part number ta 10 eb 01 model style package code dash number
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
