general purpose ?single & double pole e s e r i e s features ? 5 current ratings ? choice of actuator styles ? 3 terminal types (optional screw terminals available ?consult factory) ? 3 contact arrangements ? long-life coil spring mechanism ? high-temperature 150? and 200? available on select models (consult factory) specifications electrical temperature rating: 1 05 c std. ( 1 50 c and 200 c optional e13, e14, e19, e20, g13) 85? std. (e28 and e29), 85 c std. ( 1 50 c optional) e25 flammability rating: ul94hb materials case: general purpose phenolic actuating button: thermoplastic nylon common terminals: brass (e13, e19, e19a, g13, g20), silver-plated brass (e14, e20), silver-plated copper (e28, e29, e30) no and nc terminals: brass (e13, e19, e19a, g13, g20) copper (e14, e20, e28, e29, e30) moving blade: brass (e13, e19, e19a, g13, g20) silver-plated beryllium copper (e14, e20, e28, e29, e30) spring: stainless steel auxiliary actuators: cold-rolled steel (nickel-plated) roller: sintered stainless steel contacts: gold crosspoint (g13, g20, e19a) silver-cadmium oxide (e13, e14, e19, e19a, e20, e28, e29, e30) silver alloy (e19a, e29, e30) electrical ratings electrical life at rated load switch according to vde according to ul series en61058 rating ul1054 rating (min. operations) (min. operations) e13/e19 n/a 15a, 125/250vac; 3/4hp, 125vac n/a 6,000* 1-1/2hp, 250vac; 2a, 48 vdc (e13 only) ** e19a n/a 15a, 125/250vac; 3/4hp, 125vac; 1-1/2hp, 250vac n/a 6,000 (mixed ratings) 0.1a, 125vac e14/e25 n/a 25a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac; 2a, 48vdc (e14 only) ** e20 n/a 20a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac e28/e29 n/a 30.1a, 125/250/277vac n/a 6,000 (ul approved only resistive load only) e30 n/a 30.1a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac (ul only) g13/g20 n/a 0.1a, 125vac n/a 6,000* 0.1a, 30vdc (g13 only) *indicates 100k life available. **100k hi-temp not available
49 dimensions ?single pole inches (mm) actuators ?single pole standard type integral hinged lever and roller actuators are available in choice of two mounting positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown. j & m type optional hardware ?single pole brass hex nut 0012-0023 brass knurled nut 0012-0025 brass hex nut 0012-0028 (nickel-plated) brass knurled nut 0012-0026 (nickel-plated) star washer (lockwasher) 0012-0073 specifications subject to change without notice. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch you need. circuitry ?single pole contact arrangement available in choice of single pole double throw or single pole sin - gle throw, either normally open or normally closed. in general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. example: e13-00e is double throw, e13-01e is normally open, and e13-02e is normally closed. mounting ?single pole recommended mounting screw: #6-32 round head. recommended torque on screw: 6 inch lbs. max. recommended maximum torque for ferrule: 20 inch pounds terminals ?single pole standard 0.250 x 0.032 (6.35mm x 0.81mm) [optional 0.187 x 0.032 (4.75mm x 0.81mm)] qc terminals can be furnished with angle formed up or down. forms include straight 30? 45? 85?up or down. other forms can be provided. actuator specifications ?single pole maximum maximum operating minimum max. movement actuation operating pre-travel point* over-travel differential length** series/ actuator switch force inches inches inches inches inches prefix type type (g) (mm) (mm) (mm) (mm) (mm) e13/g13 ?0e 425 0.050 0.285 0.020 ? 0.100 0.015 (1.27) (7.24 0.51) (2.54) (0.38) e14/e29/e30 ?0a 850 0.100 0.248 0.026 ? 0.050 0.015 (2.54) (6.30 0.66) (1.27) (0.38) e13/g13 ?0j 425 0.050 0.670 0.030 0.108 0.015 (1.27) (17.02 0.76) (2.74) (0.38) e14/e29/e30 850 0.100 0.633 0.030 0.050 0.015 (2.54) (16.08 0.76) (1.27) (0.38) e13/g13 ?0m 425 0.050 0.812 0.030 0.218 0.015 (1.27) (20.63 0.76) (5.54) (0.38) e14/e29/e30 850 0.100 0.775 0.030 0.168 0.015 (2.54) (19.69 0.76) (4.27) (0.38) e13/g13 ?0h 100 0.250 0.312 0.062 0.187 0.093 1.500 (6.35) (7.93 1.57) (4.75) (2.36) (38.10) e14/e29/e30 ? 285 0.312 0.468 0.062 0.105 *** 0.050 0.821 (7.93) (11.89 1.57) (2.67) (1.27) (20.85) e13/g13 ?0h 65 0.343 0.281 0.062 0.187 0.140 1.750 (8.71) (7.14 1.57) (4.75) (3.56) (44.45) e14/e29/e30 ? 170 0.525 0.437 0.062 0.218 0.080 1.071 (13.34) (11.10 1.57) (5.54) (2.03) (27.20) e13/g13 ?0k 100 0.250 0.718 0.062 0.187 0.093 1.391 (6.35) (18.24 1.57) (4.75) (2.36) (35.33) e14/e29/e30 ? 285 0.348 0.860 0.062 0.130 0.045 0.688 (8.84) (21.84 1.57) (3.30) (1.14) (17.47) e13/g13 ?0k 63 0.403 0.687 0.062 0.187 0.093 1.625 (10.24) (17.45 1.57) (4.75) (2.36) (41.28) e14/e29/e30 ? 211 0.483 0.828 0.062 0.218 0.073 0.943 (12.27) (21.03 1.57) (5.54) (1.85) (23.95) * measured above reference line. refer to dimensional drawing above. **actuator tolerance 0.031 inches (0.79mm). ? e14, e29 and e30 actuators are shorter and formed up 11?at the button. *** e30 minimum ove r- travel is 0.150 (3.81). ? g13 and e30 have operating point tolerances of ?0.30.
50 dimensions ?double pole inches (mm) actuators ?double pole standard type integral hinged lever and roller actuators are available in choice of two mounting positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown. j & m type optional hardware ?double pole brass hex nut 0012-0023 brass knurled nut 0012-0025 brass hex nut 0012-0028 (nickel-plated) brass knurled nut 0012-0026 (nickel-plated) star washer (lock washer) 0012-0073 specifications subject to change without notice. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch you need. note: consult factory for part number when ordering e19a switches. mounting ?double pole recommended mounting screw: #6-32 round head. recommended torque on screw: 6 inch lbs. max. recommended maximum torque for ferrule: 20 inch pounds. circuitry ?double pole contact arrangement available in choice of single pole double throw or single pole sin - gle throw, either normally open or normally closed. in general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. example: e19-00a is double throw, e19-01a is normally open, and e19-02a is normally closed. terminals ?double pole standard 0.250 x 0.032 (6.35mm x 0.81mm) [optional 0.187 x 0.032 (4.75mm x 0.81mm)] qc terminals can be furnished with angle formed up or down on common as well as open or closed terminal. forms include straight 30? 45? 85?up or down. other forms can be provided. actuator specifications ?double pole each pole maximum maximum operating minimum max. movement actuation operating pretravel point* overtravel differential length series/ actuator switch force inches inches inches inches inches prefix type type (g) (mm) (mm) (mm) (mm) (mm) e19/g20 ?0a 850 0.050 0.285 0.030 0.080 0.015 (1.27) (7.24 0.76) (2.03) (0.38) e20/e28 1280 0.100 0.248 0.030 0.050 0.015 (2.54) (6.30 0.76) (1.27) (0.38) e19/g20 ?00j 850 0.050 0.670 0.030 0.080 0.015 (1.27) (17.02 0.76) (2.03) (0.38) e20/e28 ? 1280 0.100 0.630 0.030 0.050 0.015 (2.54) (16.00 0.76) (1.27) (0.38) e19/g20 ?0m 850 0.050 0.812 0.030 0.218 0.015 (1.27) (20.62 0.76) (5.54) (.038) e20/e28 ? 1280 0.100 0.774 0.030 0.188 0.015 (2.54) (19.66 0.76) (4.78) (0.38) e19/g20 ?0h 205 0.275 0.312 0 . 062 0.187 0.093 1.500 (6.99) (7.92 1.57) (4.75) (2.36) (38.10) e20/e28 ? 425 0.330 0.468 0.062 0.156 0.050 0.821 (8.38) (11.89 1.57) (3.96) (1.27) (20.85) e19/g20 ?0h 130 0.400 0.281 0.062 0.187 0.140 1.750 (10.16) (7.14 1.57) (4.75) (3.56) (44.45) e20/e28 ? 285 0.600 0.437 0.062 0.156 0.080 1.071 (15.24) (11.10 1.57) (3.96) (2.03) (27.20) e19/g20 ?0k 212 0.250 0.718 0.062 0.187 0.093 1.391 (6.35) (18.24 1.57) (4.75) (2.36) (35.33) e20/e28 ? 425 0.348 0.860 0.062 0.156 0.045 0.688 (8.84) (21.84 1.57) (3.96) (1.14) (17.48) e19/g20 ?0k 150 0.312 0.687 0.062 0.187 0.140 1.625 (7.92) (17.45?.57) (4.75) (3.56) (41.28) e20/e28 ? 312 0.525 0.828 0.062 0.146 0.075 0.943 (13.34) (21.03 1.57) (3.71) (1.91) (23.95) * measured above reference line. refer to dimensional drawing above. **actuator tolerance .0.031 inches (0.79mm). ? e20 and e28 actuators are shorter and formed up 15?at the button. contact factory for e25 specifications.
|
