? generic layout for passive networks ? easily create lumped element ?lters, equalizers, bias networks, atenuators, etc. ? up to three series elements ? up to eight parallel elements ? accommodates 0603/0805 parts ? ro-4350 board material ? fits microamp mh-series housings assembly network schematic for additional product information, plea s e visit www .twinind.com contact information: 925-866-8946 (phone) 925-866-8937 (fax) sales@twinind.com microamp MB-7 circuit board for passive networks the microamp MB-7 circuit board is designed for rapid prototyping of passive networks such as ?lters, atenuators, equalizers, bias tees, etc. passive elements such as resistors, capacitors, and inductors can be combined in a variety of series and shunt con?gura - tons. networks can be easily designed and assembled with standard surface-mount passive components. it includes provisions for three series elements and up to eight shunt elements in either 0603 or 0805 packages. this board will ?t the microamp mh series of connectorized housings that allow it to be used as a single passive network or cascaded with other microamp boards for added versa - tlity. boards are fabricated from a high-performance 13 mil thick ro-4350 laminate with rohs compatble enig platng (electroless nickel/immersion gold) on both the component side and the solid botom ground plane. the board measures 0.490" x 0.590" and mounts into the housing with four #1-72 screws. pads for the rf connectors allow the sma center pins to be easily soldered to the board afer it is installed into the housing. ref size function s1-s3 0603/0805 series element p1-p8 0603/0805 parallel element j1 input j2 output features
|