? fits mini-circuits lfcn, hfcn, and bfcn ?lters in fv1206 package ? lowpass, highpass, bandpass ?lters ? many ?lters to choose from ? ro-4350 board material ? fits microamp mh-series housings assembly filter schematic for additional product information, plea s e visit www .twinind.com contact information: 925-866-8946 (phone) 925-866-8937 (fax) sales@twinind.com microamp MB-8 circuit board for mini-circuits ltcc filters the microamp MB-8 circuit board is designed for rapid prototyping of microwave ?lters using the mini-circuits line of lfcn, hfcn, and bfcn components in the fv1206 package. filters from under 100 mhz to over 6 ghz can be quickly fabricated in lowpass, highpass, or bandpass con?guratons. in additon, the MB-8 can be used to insert a series element with a standard 1206 surface mount package such as a dc blocking capacitor or series resistor. this board will ?t the microamp mh series of connectorized housings that allow it to be used as a single passive network or cascaded with other microamp boards for added versatlity. boards are fabricated from a high-performance 13 mil thick ro-4350 laminate with rohs compatble enig platng (electroless nickel/immersion gold) on both the component side and the solid botom ground plane. the board measures 0.490" x 0.590" and mounts into the housing with four or eight #1-72 screws. mountng screws closer to the traces allow for beter grounding with higher frequency ?lters. pads for the rf connectors allow the sma center pins to be easily soldered to the board afer it is installed into the housing. ref size function fil1 fv1206/1206 filter or passive j1 input j2 output features
|