? 2008 ixys all rights reserved 1 - 2 g vwo 50 20080828a ixys reserves the right to change limits, test conditions and dimensions features thyristor controller for ac (circuit w3c acc. to iec) for mains frequency ? package with metal base plate ? isolation voltage 3000 v~ ? planar passivated chips ? ul applied applications ? switching and control of three phase ac circuits ? softstart ac motor controller ? solid state switches ? light and temperature control advantages ? easy to mount with two screws ? space and weight savings ? improved temperature and power cycling ? high power density symbol conditions maximum ratings i rms t c = 85c, 50 - 400 hz (per phase) 50 a i trms t vj = t vjm 36 a i tavm t c = 85c (180 sine) 23 a i tsm t vj = 45c t = 10 ms (50 hz), sine 520 a v r = 0 t = 8.3 ms (60 hz), sine 560 a t vj = t vjm t = 10 ms (50 hz), sine 460 a v r = 0 t = 8.3 ms (60 hz), sine 500 a i 2 t t vj = 45c t = 10 ms (50 hz), sine 1350 a 2 s v r = 0 t = 8.3 ms (60 hz), sine 1320 a 2 s t vj = t vjm t = 10 ms (50 hz), sine 1060 a 2 s v r = 0 t = 8.3 ms (60 hz), sine 1050 a 2 s (di/dt) cr t vj = t vjm repetitive, i t = 150 a 100 a/s f =50 hz, t p =200 s v d = 2/3 v drm i g = 0.3 a non repetitive, i t = i tavm 500 a/s di g /dt = 0.3 a/s (dv/dt) cr t vj = t vjm v dr = 2 / 3 v drm 1000 v/s r gk = ; method 1 (linear voltage rise) p gm t vj = t vjm t p = 30 s 10 w i t = i tavm t p = 300 s 5 w p gavm 0.5 w v rgm 10 v t vj -40...+125 c t vjm 125 c t stg -40...+125 c v isol 50/60 hz, rms t = 1 min 2500 v~ i isol < 1 ma t = 1 s 3000 v~ m d mounting torque (m5) 5/44 15% nm/lb.in. terminal connection torque (m3; m5) 1.5/13 15% nm/lb.in. weight typ. 250 g v rsm v rrm type v dsm v drm vv 1200 1200 vwo 50-12io7 1400 1400 vwo 50-14io7 1600 1600 vwo 50-16io7 data according to iec 60747 refer to a single thyristor/diode unless otherwise stated. three phase ac controller modules i rms = 50 a v rrm = 1200-1600 v preliminary data 14 1 16 2 17 3 710 811 913 3 2 1 9 8 7 16 14 17 10 11 13 p h a s e - o u t
? 2008 ixys all rights reserved 2 - 2 g vwo 50 20080828a ixys reserves the right to change limits, test conditions and dimensions symbol conditions characteristic values i d , i r t vj = t vjm ; v r = v rrm ; v d = v drm <5ma v t i t = 80 a; t vj = 25c < 1.65 v v t0 for power-loss calculations only 0.85 v r t 11 m v gt v d = 6 v; t vj = 25c < 1.0 v t vj = -40c < 1.6 v i gt v d = 6 v; t vj = 25c < 100 ma t vj = -40c < 150 ma v gd t vj = t vjm ;v d = 2 / 3 v drm < 0.2 v i gd <5ma i l t vj = 25c; t p = 10 s < 200 ma i g = 0.3 a; di g /dt = 0.3 a/s i h t vj = 25c; v d = 6 v; r gk = < 150 ma t gd t vj = 25c; v d = 1/2 v drm <2s i g = 0.3 a; di g /dt = 0.3 a/s t q t vj = t vjm ; i t = 20 a, t p = 200 s; di/dt = -10 a/s typ. 150 s v r = 100 v; dv/dt = 15 v/s; v d = 2/3 v drm r thjc per thyristor; sine 180el 1.20 k/w per module 0.20 k/w r thjk per thyristor; sine 180el 1.31 k/w per module 0.218 k/w d s creeping distance on surface 8.0 mm d a creepage distance in air 4.5 mm a max. allowable acceleration 50 m/s 2 dimensions in mm (1 mm = 0.0394") p h a s e - o u t
|
