inches millimeters symbol min max min max t - 0.080 - 2.03 a 0.016 0.050 0.41 1.27 l 0.311 0.335 7.90 8.51 w 0.185 0.207 4.70 5.26 v aristors jv 08ch sm d surface mount m etal oxide varistors sp ecification s packaging tape and reel standard: 13 inch reel (4.000 pcs.) option: 7 inch reel (1.000 pcs.) material dimension s t a w l feature s monolaye r construction in a 5mm x 8mm package size. leadless, surface chip form bi-directional clamping no derating up to 125 c ambient. available with nickel/t in end termination applications surface - mount chip form intended for hybrid-circuit application pcs and peripherals utility meters proximity switches consumer products protect ion of various kinds of transistors?bdiodes ?bics ?b thyristors?btriacs and semiconductors...etc., b od y : ceramic (zno ) t erminals: ni/sn plated (code ?p?) operating t emperature -55 to +125c solderability acc. to iec 60068-2-58 235c, 2s soldering heat resistanc e 260oc, 10 sec. (iec 60068-2-58) 280oc, 5 sec. (iec 60068-2-58) response t ime <0.5ns t emperature c oefficient ( a v) of c lamping voltage (vc) @ specified test current <0.01%/ c power dissipation 0.25w max. maximum ratings (125c ) specifications (25c ) jv 08ch180 jv 08ch220 jv 08ch270 jv 08ch330 jv 08ch390 jv 08ch470 jv 08ch560 jv 08ch680 jv 08ch820 jv 08ch101 jv 08ch121 jv 08ch151 jv 08ch181 jv 08ch201 jv 08ch221 jv 08ch241 jv 08ch271 jv 08ch331 jv 08ch361 jv 08ch391 jv 08ch431 14,0 18,0 22,0 26,0 31,0 38,0 45,0 56,0 65,0 85,0 102 127 153 175 180 200 220 270 300 330 369 11, 0 14,0 17,0 20,0 25,0 30,0 35,0 40,0 50,0 65,0 75,0 95,0 115 130 140 150 180 200 230 250 275 25 0 250 250 250 250 250 250 250 500 500 500 500 500 500 500 500 500 500 500 500 50 0 0,80 0,80 1,00 1,20 1,50 1,80 2,30 3,00 4,20 4,80 6,00 8,00 10,0 11,0 12,0 13,0 14,0 16,0 20,0 21,0 23,0 36,0 @ 5 46,0 @ 5 54,0 @ 5 67,0 @ 5 75,0 @ 5 89,0 @ 5 106 @ 5 135 @ 5 135 @ 10 165 @ 10 197 @ 10 250 @ 10 290 @ 10 340 @ 10 356 @ 10 389 @ 10 437 @ 10 520 @ 10 593 @ 10 647 @ 10 705 @ 10 16, 0 18,7 23,0 30,0 35,0 42,0 50,0 62,0 74,0 90,0 108 135 162 184 198 216 245 300 324 351 387 20, 0 26,0 31,0 36,0 43,0 52,0 62,0 74,0 90,0 110 132 165 198 228 242 268 270 330 396 429 473 3805 1835 1590 1250 1050 970 838 800 625 565 340 270 230 200 180 165 130 110 110 100 100 310 0 1600 1350 1070 900 820 710 680 530 480 300 250 200 180 160 150 120 100 100 90 90 3, 0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 3,0 specifications are subject to change without notice t ype max. cont. working voltage max . non-repetitive surge current max. non - repetitive surge energy (10/100 0 s) max. clamping voltage at spec. current nominal voltage at 1ma (dc) test current typ. capacitance typ. inductance (8/2 0 s) (8/2 0 s) 1khz . 1mhz . v m(ac) (v) (v) v m(dc) (nh ) (pf) (pf) (v) (v) (v@a) (j) (a) i tm w tm v c v n(dc)min. v n(dc)max. c typ. c typ. l typ. orde r qty . order - t yp e t erminal code packagin g information numbe r jv 08ch361 p t
jv08ch820 - jv08ch431 500 400 300 200 100 90 80 70 60 50 40 30 20 1000a 100a 10a 1a 100ma 10ma 1ma 10 peak amperes (a) maximum peak voltage (v) maximum clamping voltage model size 5 x 8 mm ta= -55j to125j jv08ch680 jv08ch560 jv08ch470 jv08ch390 jv08ch330 JV08CH270 jv08ch220 jv08ch180 transient v/i characteristics curves: jv08ch180 - jv08ch680 jv 08ch sm d v aristors 5000 4000 3000 2000 1000 900 800 700 600 500 400 300 200 10000a 1000a 100a 10a 1a 100ma 10ma 1ma 100 peak amperes (a) maximum peak voltage (v) maximum clamping voltage model size 5 x 8 mm ta= -55j to125j transient v/i characteristics curves: jv08ch431 jv08ch391 jv08ch361 jv08ch331 jv08ch271 jv08ch241 jv08ch221 jv08ch201 jv08ch181 jv08ch151 jv08ch121 jv08ch101 jv08ch820
jv08ch180 - jv08ch680 jv08ch 82 0 - jv08ch 431 impulse duration s) ( g 10000 1000 surge current (a) 20 100 1 10 100 500 200 50 20 5 2 1000 2000 100 20 1 10 100 500 1000 10000 ( g s) 200 50 20 5 2 0.5 0.2 surge current (a) impulse duration v aristor s jv 08ch sm d pulse rating curves : pulse rating curves : model size 5 x 8 mm jv08ch180 - jv08ch680 model size 5 x 8 mm jv08ch820 - jv08ch431 10 1 2 10 2 10 3 10 4 10 5 10 6 indefinite 10 4 10 5 10 6 indefinite 10 3 10 2 1 2 10
absolute maximum ratings continuous: ch series units steady state applied voltage: ac voltage range (v m(ac)rms ) ???????????????????????. 11 to 275 v dc voltage range (v m(dc) ) ????????????????????????.. 14 to 3 69 v transient: peak pulse current (i tm ) for 8/20s current wave (see figure2) ??????????.????????.. 250 to 500 a single pulse energy range for 10/1000s current wave (w tm ) ????????????????????.. 0.8 to 23 j operating ambient temperature range(t a ) ?????????????????. -55 to 1 25 j storage temperature range (t stg ) ????????????????????? -55 to 150 j temperature coefficient (av) of clamping voltage (v c ) at specified test current ?. ??0.01 m/j standard shipping quantities tape and reel is the standard packa ging method of the ch series. there are 1,000 pcs /reel/7 inch. ?less than 100 pieces sample quantity, the units are shipped bulk pack. recommended pad outline symbol inches millimeters a 0.402 10.21 b 0.216 5.50 c 0.087 2.21 a b c note note?gavoid metal runs in this area v aristors jv 08ch sm d
tape and reel specifications ? embossed taping tape in accordance can be supplied to iec publication 286 - 3 dimensions (mm) s ymbol type a 0 0.1 b 0 0.1 w 0.3 f 0.1 e 0.1 p 1 0.1 p 2 0.1 p 0 0.1 ? d 0 ?? 0.1 ?e 0 t max. t 2 max. ? d 1 min. 08ch 5.5 8.5 16 7.5 1.75 8.0 2.0 4.0 1.5 1.0 3.0 1.5 k 0 ?g depth of cavity: dependent chip size to minimize rotation precautions to the user for ch - series surface mount mov: 1. soldering recommendation: material: 62/36/2 sn/pb/ag or equivalent reflow temperature/time: 230 j max. /10 sec. max. flux: non - activated 2. when mounting surface mount varistor on the pc board, the improper soldering temperature and time out of the limits may reduce the adhesive strength of their terminals. 3. put the proper volume of solder ?] the height of fillet ?^ on pc board for installing surface mount varistors, because it directly affects the installed varistors. the design of copper pad patterns and dimensions should be set, so that the proper volume of solder can provide. 4. do not use solvents such as thinner and acetone, which dissolve or make the exterior covering of varistor deteriorate. ultrasonic cleaning shall be so set that the vibration can not travel the assembly boards. 5. for surface mount ch series mov, use flux with a halogen content of less than 0.2 wt. do not use strong acid flux. 6. store varistors at temperature of ? 10 to +40 j and relative humidity of less than 75 m . avoid storing in environment of rapid changes in temperature, direct sunlight, corrosive, gas or dust, and store with the varistors packaged. a 0 p 1 d 1 b 0 d 0 p 0 p 2 e w f top tape direction of unreeling t k 0 t 2 jv 08ch sm d v aristor s
|
