1 of 1 050207 ds9094sm surface-mount i button clip www.maxim-ic.com features ? compact single-piece, all-metal clip for i button ? mounting ? lowest profile i button mount ? made from 0.25mm thick tin-plated phosphor bronze ? withstands high temperatures required for surface mounting ? can be soldered, riveted, or screw-mounted ? compatible with leaded and lead-free solder processes ? available for f3 and f5 i button ordering information ds9094sm3+ clip for f3 i button ds9094sm5+ clip for f5 i button mounting pad layout data pad ? 13.97 6.35 5.72 ground 29.36 keep-out area ? 19.05 ds9094sm3 ds9094sm5 4.81 4.01 hole centered ? 2.35 28.09 0.38 17.57 5.08 hole centered ? 2.35 28.09 0.38 17.57 5.08 4.81 6.81 all dimensions are in millimeters. description the ds9094sm is a low-cost, surface- mount device that retains a 16.3mm i button on a printed circuit board. two springs that double as ground contacts press the i button to the data pad on the printed circuit board. the i button can be inserted and extracted without special tools. for best results the data contac t on the printed circuit board should be plated with a layer of minimum 0.76m hard gold over minimum 3.81m nickel. i button is a registered trademark of dallas semiconductor.
|
