do not scale from this print tcmd-xx-x-xx.xx-01-xx-xxx-xxx no of positions -03,-04,-05,-08,-10,-12, -13,-15,-17,-20,-22,-25 note: other positions availale as aso. tool is capable of positions 2-25 lead style end assembly -d: double end -s: single end -t: transfer end assembly length (2 inch minimum) option option leave blank for standard -f: flash gold plating (use tcsd-xx-01-f) -rf: flash gold plating (for double and single end use t-1s14-01-f) (for transfer end use t-1s14-01-f & tcsd-xx-01-f) option see sheets 2, 3 & 4 see sheets 2, 3 & 4 w w .158 4.00 ref xx.xx[xx.x x 25.4] .125[3.18] (no. of pos x .07874[2.0000]) + .15748[4.0000] ref -d double end .120 3.05 ref .200 .010 5.08 0.254 .010 max 0.25 cable overhang 3 2 1 colored wire to side of first pos indicator notch denotes first position xx.xx[xx.x x 25.4] .125[3.18] -s single end (same as -d unless specified) c sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: 2mm double row male idc cable assembly by: tcmd-xx-x-xx.xx-01-xx-xxx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 11/26/2007 4 1 sheet scale: 2:1 insulator: valox 420 seo, color: black contact : #25 becu 1/2 hard, age hardened terminal: spring temper phos bronze, alloy 510 strain relief: celanex 3300, color: black f:\dwg\misc\mktg\tcmd-xx-x-xx.xx-01-xx-xxx-xxx-mkt.slddrw notes: 1. represents a critical dimension. 2. as of rev c on tcb-50 cable, assemblies will be lead free. 3. all assemblies to be 100 % electronically tested for shorts and opens. 4. all assemblies to be 100 % hi-pot tested at 800v. 5. strain relief to withstand 5lbs straight pull. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision w
2.00 min 5.00 max xx -bxx breakout option "xx" = no of conductors per row broken out from the first position -p"xx" polarized mating (use pk-07-n polarizing key) (requires transfer end. only socket is polarized) 01 03 02 04 w colored wire to opposite side of first pos indicator -rw reverse wiring .125 3.18 ref .040 1.02 ref -n notch polarization (for -t only) (if option is specified use tcsd-xx-01-n) -t transfer end (same as -d unless specified) 1 .039 1.00 ref .310 .010 7.87 0.254 4 6 7 xx.xx[xx.x x 25.4]+.50[12.7]) .125[3.18] in-process 1 -sr only +.3100[7.874] .005[.13] (no of pos) x .0787[2.000] 5 xx.xx[xx.x x 25.4] .125[3.18] 25.37 in-process 2 -sr only -sr: strain relief (not available with -o, -m, -r, -dxx, or -bxx) (sold as assemblies only) (same as -d unless specified) (must use heat bend/strain relief tool on positions 20-25) sheet of 2mm double row male idc cable assembly by: tcmd-xx-x-xx.xx-01-xx-xxx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 11/26/2007 4 2 sheet scale: 1.5:1 revision w f:\dwg\misc\mktg\tcmd-xx-x-xx.xx-01-xx-xxx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
xx.xx[xx.x x 25.4] .125[3.18] outside socket reversed when daisy chained xx.xx[xx.x x 25.4] .125[3.18] middle terminal revesred when daisy chained -o outside transfer first position indicator xx.xx[xx.x x 25.4] .125[3.18] outside socket reversed when daisy chained xx.xx[xx.x x 25.4] .125[3.18] middle terminal revesred when daisy chained first position indicator first position indicator first position indicator -o outside reversed -m middle reversed -m middle transfer sheet of 2mm double row male idc cable assembly by: tcmd-xx-x-xx.xx-01-xx-xxx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 11/26/2007 4 3 sheet scale: 1.5:1 revision w f:\dwg\misc\mktg\tcmd-xx-x-xx.xx-01-xx-xxx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
-r reverse connector first position indicator xx.xx[xx.x x 25.4] .125[3.18] both terminal reversed when daisy chained xx.xx[xx.x x 25.4] .125[3.18] -d"xx" daisy chain transfer xx.xx[xx.x x 25.4] .125[3.18] -r reverse transfer first position indicator xx.xx[xx.x x 25.4] .125[3.18] both terminal reversed when daisy chained note: 2" minimum length 1" increments only first position indicator -d"xx" daisy chain - double note: 2" minimum length 1" increments only sheet of 2mm double row male idc cable assembly by: tcmd-xx-x-xx.xx-01-xx-xxx-xxx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b ray 11/26/2007 4 4 sheet scale: 1.5:1 revision w f:\dwg\misc\mktg\tcmd-xx-x-xx.xx-01-xx-xxx-xxx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
