View XM-L_5464097.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds33 rev 2 product family data sheet cree ? xlamp ? XM-L leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description the xlamp XM-L l e d is the indus- trys highest performance, single- die white lighting-class le d. xlamp XM-L is 20% more effcient than xlamp xp-g at the same current, and can deliver 1000 lumens with 100 lumens per watt effcacy. the xlamp XM-L l e d offers crees in- dustry-leading features: wide view - ing angle, symmetrical package, unlimited foor life and electrically neutral thermal path. xlamp XM-L l e ds can enable led light into new applications that re - quire tens of thousands of lumens, such as high bay and high-output area lighting. XM-L is also the ide - al choice for lighting applications where high light output and maxi - mum effcacy are required, such as le d light bulbs, outdoor lighting, portable lighting, indoor lighting and solar-powered lighting. features ? maximum drive current: 3000 ma ? low thermal resistance: 2.5c/w ? maximum junction temperature: 150c ? viewing angle: 125 ? available in warm, neutral and cool white ? ansi-compatible chromaticity bins ? unlimited foor life at 30oc/85% rh ? refow solderable - jede c j-std-020c ? e lectrically neutral thermal path table of contents cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 label with c ree bin code, qty, lot # ...................................... 10 label with customer order code, .. 10 qty, reel id, po# .......................... 10 flux characteristics .................... 2 characteristics .......................... 2 relative spectral power distribution ............................... 3 relative flux vs. junction temperature ............................. 3 e lectrical characteristics ............. 4 thermal design ......................... 4 relative flux vs. current ............ 5 relative chromaticity vs. current and temperature (cool white) ..... 5 relative chromaticity vs. current and temperature (warm white) ... 6 typical spatial distribution .......... 7 refow soldering characteristics .. 8 notes ....................................... 9 mechanical dimensions .............. 10 tape and reel ........................... 9 packaging ................................ 10 label with cree bin code, qty, lot # ................................. 10 label with customer order code, ........................................ 10 qty, reel id, po# ..................... 10
2 2 flux characteristics (tj = 25c) the following table provides several base order codes for xlamp XM-L l e ds. it is important to note that the base order codes listed here are a subset of the total available order codes for the product family. for more order codes, as well as a complete description of the order-code nomenclature, please consult the xlamp XM-L binning and labeling document. color cct range base order codes min luminous flux @ 700 ma (lm) order code min. max. group flux (lm) cool white 5,000 k 8,300 k t5 260 xmlawt-00-0000-0000t5051 t6 280 xmlawt-00-0000-0000t6051 neutral white 3,700 k 5,000 k t4 240 xmlawt-00-0000-000lt40 e4 t5 260 xmlawt-00-0000-000lt50f4 warm white 2,600 k 3,700 k t2 200 xmlawt-00-0000-000lt20 e7 t3 220 xmlawt-00-0000-000lt30f7 notes: ? cree maintains a tolerance of 7% on fux and power measurements and 2 on cri measurements . ? typical cri for cool white (5,000 k C 8,300 k cct) is 65. ? typical cri for neutral white (3,700 k C 5,000 k cct) is 75. ? typical cri for warm white (2,600 k C 3,700 k cct) is 80. characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 2.5 viewing angle (fwhm) degrees 125 temperature coeffcient of voltage mv/c -3.0 esd classifcation (hbm per mil-std-883d) class 2 dc forward current ma 3000 reverse v oltage v 5 forward voltage (@ 700 ma) v 2.9 3.5 forward voltage (@ 1500 ma) v 3.1 forward voltage (@ 3000 ma) v 3.35 le d junction temperature c 150 xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
3 3 relative spectral power distribution relative flux vs. junction temperature (i f = 700 ma) relative spectral power - 20 0 20 40 60 80 100 400 450 500 550 600 650 700 750 relative radiant power (%) wavelength (nm) 2600k - 3700k cct 3700k - 5000k cct 5000k - 8300k cct 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
4 4 electrical characteristics (t j = 25c) thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. electrical characteristics (tj = 25oc) 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 2.00 2.20 2.40 2.60 2.80 3.00 3.20 3.40 3.60 forward current (ma) forward voltage (v) cool white thermal design 0 500 1000 1500 2000 2500 3000 3500 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 4 c/w rj - a = 7 c/w rj - a = 10 c/w rj - a = 15 c/w xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
5 5 relative flux vs. current (t j = 25c) relative chromaticity versus current and temperature (cool white) typical spatial radiation pattern 0% 25% 50% 75% 100% 125% 150% 175% 200% 225% 250% 275% 300% 325% 350% 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 relative luminous flux (%) forward current (ma) cool white warm white - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 500 1000 1500 2000 2500 3000 current (ma) ccx ccy - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 500 1000 1500 2000 2500 3000 current (ma) ccx ccy xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
6 6 relative chromaticity versus current and temperature (cool white) relative chromaticity versus current and temperature (warm white) cool white warm white - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy cool white warm white - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 500 1000 1500 2000 2500 3000 current (ma) ccx ccy - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 500 1000 1500 2000 2500 3000 current (ma) ccx ccy xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
7 7 relative chromaticity versus current and temperature (warm white) typical spatial distribution 0 20 40 60 80 100 120 - 100 - 80 - 60 - 40 - 20 0 20 40 60 80 100 relative luminous intensity (%) angle (o) cool white warm white - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
8 8 reflow soldering characteristics in testing, cree has found xlamp XM-L l e ds to be compatible with jede c j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3c/second max. 3c/second max. preheat: temperature min (ts min ) 100c 150c preheat: temperature max (ts max ) 150c 200c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183c 217c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215c 260c time within 5c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6c/second max. 6c/second max time 25c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
9 9 notes lumen maintenance projections cree currently recommends a maximum drive current of 2000 ma for xlamp XM-L white in designs seeking the energy star* 35,000 hour lifetime rating ( 94.1% luminous fux @ 6000 hours) or 25,000-hour lifetime rating ( 91.8% luminous fux @ 6000 hours). please read the xlamp long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. * these lifetime ratings are based on the current ene rgy star solid state lighting luminaires v 1.1 (december 12, 2008) and energy star integral led lamps v1.0 (december 3, 2009) lumen maintenance criteria. moisture sensitivity in testing, cree has found xlamp XM-L leds to have unlimited foor life in conditions 30oc / 85% relative humidity (rh). moisture testing included a 168 hour soak at 85oc / 85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. vision advisory claim warning: do not look at exposed lamp in operation. e ye injury can result. see led e ye safety at http://www.cree. com/products/pdf/xlamp_e yesafety.pdf. xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
10 10 mechanical dimensions all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 3.02 0.5 0.5 2.8 3.8 4.8 0.73 0.5 4.8 3.8 0.5 4.8 2.782 0.5 0.4 0.4 0.4 0.4 4.7 4.7 0.6 3.9 1 / 1 16.000 d 2610-00009 outline drawing, 5050 xm -- -- -- -- -- -- 04/9/10 d. cronin revisons rev description by date app'd a new release dc 4/15/10 b added die outline dds 10/22/10 b.stanton c added dimension for top of flash dc 11/18/10 b.stanton d 3.02 was 3.09 dc 1/5/11 b.stanton recommended pcb solder pad recommended stencil pattern shaded area is open size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 3.02 0.5 0.5 2.8 3.8 4.8 0.73 0.5 4.8 3.8 0.5 4.8 2.782 0.5 0.4 0.4 0.4 0.4 4.7 4.7 0.6 3.9 1 / 1 16.000 d 2610-00009 outline drawing, 5050 xm -- -- -- -- -- -- 04/9/10 d. cronin revisons rev description by date app'd a new release dc 4/15/10 b added die outline dds 10/22/10 b.stanton c added dimension for top of flash dc 11/18/10 b.stanton d 3.02 was 3.09 dc 1/5/11 b.stanton recommended pcb solder pad recommended stencil pattern shaded area is open size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 3.02 0.5 0.5 2.8 3.8 4.8 0.73 0.5 4.8 3.8 0.5 4.8 2.782 0.5 0.4 0.4 0.4 0.4 4.7 4.7 0.6 3.9 1 / 1 16.000 d 2610-00009 outline drawing, 5050 xm -- -- -- -- -- -- 04/9/10 d. cronin revisons rev description by date app'd a new release dc 4/15/10 b added die outline dds 10/22/10 b.stanton c added dimension for top of flash dc 11/18/10 b.stanton d 3.02 was 3.09 dc 1/5/11 b.stanton recommended pcb solder pad recommended stencil pattern shaded area is open top view bottom view side view recommended pcb solder pad recommended stencil pattern (shaded area is open) xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
11 11 tape and reel all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 12 1.75 4 8 3.35 1 / 1 3.000 a 2402-00012 xm loading spec -- -- -- -- -- -- 06/08/10 d. cronin revisons rev description by date app'd a loaded pocket count was 750 dds 11/8/10 bs end start user feed direction cathode side anode side 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.
12 12 packaging cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # desiccant (inside bag) humidity indicator (inside bag) label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag dessicant (inside bag) humidi t y indicator card (inside bag) p atent label label with customer order code, q t y , r eel i d , po # label with customer order code, qty, reel id, po# label with cree bin code, qty, lot # cree bin code & barcode label vacuum-sealed moisture barrier bag label with customer p/n, qty, lot #, po # label with cree bin code, q t y , lot # label with cree bin code, q t y , lot # v acuum - sealed moisture barrier bag p atent label label with customer order code, q t y , r eel i d , po # xlamp XM-L leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2010-2011 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trade - marks of cree, inc.

▲Up To Search▲

Price & Availability of XM-L

	To Download XM-L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .