document number: 94351 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 05-may-08 1 three phase ac switch (power modules), 50 a to 100 a 54-94-104mt..kpbf series vishay high power products features ? package fully compatible with the industry standard int-a-pak power modules series ? high thermal conductivity package, electrically insulated case ? outstanding number of power encapsulated components ? excellent power volume ratio ? 4000 v rms isolating voltage ? ul e78996 approved ? totally lead (pb)-free ? designed and qualified for industrial level description a range of extremely compact, encapsulated three phase ac switches offering efficient and reliable operation. they are intended for use in general purpose and heavy duty applications as control motor starter. product summary i o 50 a to 100 a mtk rohs compliant major ratings and characteristics symbol characteristics 54mt.k 94mt.k 104mt.k units i o 50 90 100 a t c 80 80 80 c i fsm 50 hz 390 950 1130 a 60 hz 410 1000 1180 i 2 t 50 hz 770 4525 6380 a 2 s 60 hz 700 4130 5830 i 2 t 7700 45250 63800 a 2 s v rrm range 800 to 1600 v t stg , t j range - 40 to 125 c
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94351 2 revision: 05-may-08 54-94-104mt..kpbf series vishay high power products three phase ac switch (power modules), 50 a to 100 a electrical specifications note (1) for single ac switch voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v v drm , maximum repetitive peak off-state voltage, gate open circuit v i rrm /i drm , maximum at t j = 125 c ma 54mt..k 80 800 900 800 20 (1) 100 1000 1100 1000 120 1200 1300 1200 140 1400 1500 1400 160 1600 1700 1600 94/104mt..k 80 800 900 800 40 (1) 100 1000 1100 1000 120 1200 1300 1200 140 1400 1500 1400 160 1600 1700 1600 forward conduction parameter symbol test conditions 54mt.k 94mt.k 104mt.k units maximum i rms output current at case temperature i o for all conduction angle 50 90 100 a 80 80 80 c maximum peak, one-cycle forward, non-repetitive on state surge current i tsm t = 10 ms no voltage reapplied initial t j = t j maximum 390 950 1130 a t = 8.3 ms 410 1000 1180 t = 10 ms 100 % v rrm reapplied 330 800 950 t = 8.3 ms 345 840 1000 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 770 4525 6380 a 2 s t = 8.3 ms 700 4130 5830 t = 10 ms 100 % v rrm reapplied 540 3200 4510 t = 8.3 ms 500 2920 4120 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 7700 45 250 63 800 a 2 s low level value of threshold voltage v t(to)1 (16.7 % x x i t(av) < i < x i t(av) ), t j maximum 1.16 0.99 0.99 v high level value of threshold voltage v t(to)2 (i > x i t(av) ), t j maximum 1.44 1.19 1.15 low level value on-state slope resistance r t1 16.7 % x x i t(av) < i < x i t(av) ), t j maximum 12.54 4.16 3.90 m high level value on-state slope resistance r t2 (i > x i t(av) ), t j maximum 11.00 3.56 3.48 maximum on-state voltage drop v tm i pk = 150 a, t j = 25 c t p = 400 s single junction 2.68 1.55 1.53 v maximum non-repetitve rate of rise of turned on current di/dt t j = 25 c, from 0.67 v drm , i tm = x i t(av) , i g = 500 ma, t r < 0.5 s, t p > 6 s 150 a/s maximum holding current i h t j = 25 c, anode supply = 6 v, resistive load, grate open circuit 200 ma maximum latching current i l t j = 25 c, anode supply = 6 v, resistive load 400
document number: 94351 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 05-may-08 3 54-94-104mt..kpbf series three phase ac switch (power modules), 50 a to 100 a vishay high power products note (1) available with dv/dt = 1000 v/s, to co mplete code add s90 i. e. 104mt160kbs90 blocking parameter symbol test conditions 54mt.k 94mt.k 104mt.k units rms isolation voltage v ins t j = 25 c all terminal shorted f = 50 hz, t = 1 s 4000 v maximum critical rate of rise of off-state voltage dv/dt (1) t j = t j maximum, linear to 0.67 v drm , gate open circuit 500 v/s triggering parameter symbol test conditions 54mt.k 94mt.k 104mt.k units maximum peak gate power p gm t j = t j maximum 10 w maximum average gate power p g(av) 2.5 maximum peak gate current i gm 2.5 a maximum peak negative gate voltage - v gt 10 v maximum required dc gate voltage to trigger v gt t j = - 40 c anode supply = 6 v, resistive load 4.0 t j = 25 c 2.5 t j = 125 c 1.7 maximum required dc gate current to trigger i gt t j = - 40 c 270 ma t j = 25 c 150 t j = 125 c 80 maximum gate voltage that will not trigger v gd t j = t j maximum, rated v drm applied 0.25 v maximum gate current that will not trigger i gd 6ma thermal and mechanical specifications parameter symbol test conditions 54mt.k 94mt.k 104mt.k units maximum junction operating and storage temperature range t j , t stg - 40 to 125 c maximum thermal resistance, junction to case r thjc dc operation per single ac switch 0.52 0.39 0.34 k/w dc operation per junction 1.05 0.77 0.69 180 c sine cond. angle per single ac switch 0.56 0.40 0.36 180 c sine cond. angle per junction 1.12 0.80 0.72 maximum thermal resistance, case to heatsink r thcs per module mounting surface smooth, flat and grased 0.03 mounting torque 100 % to heatsink a mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. lubricated threads. 4 to 6 nm to terminal 3 to 4 approximate weight 225 g
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94351 4 revision: 05-may-08 54-94-104mt..kpbf series vishay high power products three phase ac switch (power modules), 50 a to 100 a note ? table shows the increment of thermal resistance r thjc when devices operate at diffe rent conduction angles than dc fig. 1 - current ratings characteristic fi g. 2 - forward voltage drop characteristics fig. 3 total power loss characteristics r conduction per junction devices sinusoidal conduction at t j maximum rectangular conduction at t j maximum units 180 120 90 60 30 180 120 90 60 30 54mt.k 0.072 0.085 0.108 0.152 0.233 0.055 0.091 0.117 0.157 0.236 k/w 94mt.k 0.033 0.039 0.051 0.069 0.099 0.027 0.044 0.055 0.071 0.100 104mt.k 0.027 0.033 0.042 0.057 0.081 0.023 0.037 0.046 0.059 0.082 90 8 0 70 60 110 100 120 1 3 0 maximum allowable ca s e temperature (c) rm s output current (a) 10 20 50 60 3 040 0 54mt..k s erie s device f u lly t u rned-on per s ingle ac s witch for a ll cond u ction a ngle s i rm s ~ 1 10 100 1000 in s tantaneou s on- s tate current (a) in s tantaneou s on- s tate voltage (v) 1 5 6 2 3 4 0 t j = 25 c t j = 125 c 54mt..k s erie s per j u nction 50 0 250 200 3 50 3 00 150 100 maximum total power lo ss (w) (per total module) rm s output current (a) 10 20 60 3 04050 0 1 8 0 120 90 60 3 0 54mt..k s erie s t j = 125 c device f u lly t u rned-on cond u ction a ngle ? ? 0 50 3 50 3 00 250 200 150 100 maximum total power lo ss (w) (per total module) maximum allowable ambient temperature (c) 100 125 25 50 75 0 0.1 k/w 0.2 k/w 0. 3 k/w 0.5 k/w 0.7 k/w 1.0 k/w 2.0 k/w r th s a = 0.05 k/w - r
document number: 94351 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 05-may-08 5 54-94-104mt..kpbf series three phase ac switch (power modules), 50 a to 100 a vishay high power products fig. 4 - maximum non-repetitive surge current fig. 5 - maximum non-repetitive surge current fig. 6 - current ratings characteristic fig. 7 - forward voltage drop characteristics fig. 8 - total power loss characteristics 3 25 3 50 3 00 275 250 225 200 175 150 peak half s ine wave on- s tate current (a) number of equal amplitude half cycle current pul s e s (n) 10 100 1 a t 60 hz 0.00 83 s a t 50 hz 0.0100 s at a ny r a ted lo a d condition a nd with r a ted v rrm a pplied following su rge. 54mt..k s erie s per j u nction initi a l t j = 125 c 3 50 3 00 250 200 150 400 peak half s ine wave on- s tate current (a) pul s e train duration ( s ) 0.1 1 0.01 m a xim u m non-repetitive su rge c u rrent ver sus p u l s e tr a in d u r a tion. control of cond u ction m a y not b e m a int a ined. 54mt..k s erie s per j u nction no volt a ge re a pplied r a ted v rrm re a pplied initi a l t j = 125 c 90 8 0 70 60 50 100 110 120 1 3 0 maximum allowable ca s e temperature (c) rm s output current (a) 20 40 60 8 0 120 100 0 94mt..k s erie s device f u lly t u rned-on per s ingle ac s witch for a ll cond u ction a ngle s i rm s ~ 1 10 100 1000 in s tantaneou s on- s tate current (a) in s tantaneou s on- s tate voltage (v) 12 4 5 3 0 t j = 25 c 94mt..k s erie s per j u nction t j = 125 c 50 450 3 50 400 3 00 250 150 200 100 0 maximum total power lo ss (w) (per total module) rm s output current (a) 3 0 10 20 40 50 90 100 60 70 8 0 0 1 8 0 120 90 60 3 0 94mt..k s erie s t j = 125 c device f u lly t u rned-on cond u ction a ngle ? ? 0 50 3 50 400 450 3 00 250 200 150 100 maximum total power lo ss (w) (per total module) maximum allowable ambient temperature (c) 75 100 125 50 25 0 0.05 k/w 0.15 k/w 0. 3 k/w 0.5 k/w 0.7 k/w 1.0 k/w 1.5 k/w r th s a = 0.0 3 k/w - r
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94351 6 revision: 05-may-08 54-94-104mt..kpbf series vishay high power products three phase ac switch (power modules), 50 a to 100 a fig. 9 - maximum non-repetitive surge current fig. 10 - maximum non-repetitive surge current fig. 11 - current ratings characteristic fig. 12 - forward voltage drop characteristics fig. 13 - total power loss characteristics 700 750 650 600 550 500 450 400 3 50 peak half s ine wave on- s tate current (a) number of equal amplitude half cycle current pul s e s (n) 10 100 1 94mt..k s erie s per j u nction at a ny r a ted lo a d condition a nd with r a ted v rrm a pplied following su rge. initi a l t j = 125 c a t 60 hz 0.00 83 s a t 50 hz 0.0100 s 900 8 00 700 600 500 400 3 00 1000 peak half s ine wave on- s tate current (a) pul s e train duration ( s ) 0.01 0.1 1 m a xim u m non-repetitive su rge c u rrent ver sus p u l s e tr a in d u r a tion. control of cond u ction m a y not b e m a int a ined. 94mt..k s erie s per j u nction initi a l t j = 125 c no volt a ge re a pplied r a ted v rrm re a pplied 90 8 0 70 60 120 1 3 0 100 110 maximum allowable ca s e temperature (c) rm s output current (a) 20 40 100 120 60 8 0 0 104mt..k s erie s device f u lly t u rned-on per s ingle ac s witch for a ll cond u ction a ngle s i rm s ~ 1 100 10 1000 in s tantaneou s on- s tate current (a) in s tantaneou s on- s tate voltage (v) 12 3 4 5 0 t j = 25 c 104mt..k s erie s per j u nction t j = 125 c 0 3 50 400 450 500 3 00 250 200 150 100 50 maximum total power lo ss (w) (per total module) rm s output current (a) 20 40 60 8 0 100 120 0 1 8 0 120 90 60 3 0 104mt..k s erie s t j = 125 c device f u lly t u rned-on cond u ction a ngle ? ? 50 0 450 500 400 3 50 3 00 250 200 150 100 maximum total power lo ss (w) (per total module) maximum allowable ambient temperature (c) 100 125 25 50 75 0 0.05 k/w 0.15 k/w 0.5 k/w 0.7 k/w 1.0 k/w 1.5 k/w r th s a = 0.0 3 k/ w - r 0. 3 k/w
document number: 94351 for technical ques tions, contact: ind-modules@vishay.com www.vishay.com revision: 05-may-08 7 54-94-104mt..kpbf series three phase ac switch (power modules), 50 a to 100 a vishay high power products fig. 14 - maximum non-repetitive surge current fig. 15 - maximum non-repetitive surge current fig. 16 - thermal impedance z thjc characteristics fig. 17 - gate characteristics 900 8 00 700 600 500 400 1100 1000 peak half s ine wave on- s tate current (a) number of equal amplitude half cycle current pul s e s (n) 10 100 1 104mt..k s erie s per j u nction a t 60 hz 0.00 83 s a t 50 hz 0.0100 s at a ny r a ted lo a d condition a nd with r a ted v rrm a pplied following su rge. initi a l t j = 125 c 900 8 00 700 600 500 400 1200 1100 1000 peak half s ine wave on- s tate current (a) pul s e train duration ( s ) 0.1 1 0.01 maximum non-repetitive surge current versus pulse train duration. control of conduction may not be maintained. initial t j = 125 c no voltage reapplied rated v rrm reapplied 104mt..k series per junction 0.001 0.01 0.1 1 10 0.001 0.01 0.1 1 s quare wave pul s e duration ( s ) z thjc - tran s ient thermal impedance (c/w) 10 per j u nction 104mt..k s erie s 94mt..k s erie s 54mt..k s erie s s te a dy s t a te v a l u e r thjc = 1.05 k/w r thjc = 0.77 k/w r thjc = 0.69 k/w (dc oper a tion) 0.1 1 100 10 0.001 0.01 0.1 1 in s tantaneou s gate current (a) in s tantaneou s gate voltage (v) 1000 100 10 ( b ) ( a ) (4) ( 3 ) (2) (1) (1) pgm = 100 w, tp = 500 s (2) pgm = 50 w, tp = 1 m s ( 3 ) pgm = 20 w, tp = 25 m s (4) pgm = 10 w, tp = 5 m s t j = -40 c t j = 25 c t j = 125 c vgd igd fre qu ency limited b y pg(av) 54/ 94/ 104mt..k s erie s rect a ng u l a r g a te p u l s e a ) recommended lo a d line for r a ted di/dt: 20 v, 3 0 t r = 0.5 s , t p 6 s b ) recommended lo a d line for 3 0 % r a ted di/dt: 20 v, 65 t r = 1 s , t p 6 s
www.vishay.com for technical questi ons, contact: ind-modules@vishay.com document number: 94351 8 revision: 05-may-08 54-94-104mt..kpbf series vishay high power products three phase ac switch (power modules), 50 a to 100 a ordering information table note ? to order the optional hardwar e go to www.vishay.com/doc?95172 circuit configuration device code 1 - current rating code: 5 = 50 a (average) 9 = 90 a (average) 10 = 100 a (average) 2 - ac switch 3 - essential part number 4 - voltage code x 10 = v rrm (see voltage ratings table) 5 - pbf = lead (pb)-free 5 13 2 10 4 mt 160 k pbf 4 1 2 3 4 5 6 ab c f e d links to related documents dimensions http://www.vishay.com/doc?95004
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
