i ntegrated c ircuits d ivision www.ixysic.com ds-LCA701-r03 1 LCA701 single pole, normally open optomos ? relay e 3 pb applications features description parameter rating units blocking voltage 100 v p load current 1.5 a rms / a dc on-resistance (max) 0.3 ? input control current 2 ma pin configuration switching characteristics of normally open (form a) devices ? 100v p blocking voltage ? operational temperature range: -40oc to +85oc ? 3750v rms input/output isolation ? low drive power requirements (ttl/cmos compatible) ? no moving parts ? arc-free with no snubbing circuits ? no emi/rfi generation ? small 6-pin package ? machine insertable, wave solderable ? surface mount and tape & reel version available ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment?patient/equipment isolation ? security ? aerospace ? industrial controls approvals ? ul recognized component: file # e76270 ? csa certified component: certificate 1175739 ? en 60950-1: 2006 certified component: tuv certificate b 10 05 49410 006 ordering information part # description LCA701 6 pin dip (50/tube) LCA701s 6 pin surface mount (50/tube) LCA701str 6 pin surface mount (1000/reel) form-a i f i load 10% 90% t on t off 1 3 2 4 5 6 + control C control do not use load do not use load ac/dc configuration 1 3 2 4 5 6 + control C control do not use + load C load dc-only configuration ixys integrated circuits division's LCA701 is a 100v, 1.5a, 0.3 ? , normally open (1-form-a) solid state relay that uses optically coupled mosfet technology to provide 3750v rms of input-to-output isolation. its optically coupled outputs, which use the patented optomos architecture, are controlled by a highly efficient gaaias infrared led. LCA701 is designed to replace electromechanical relays, and offers fast, reliable, bounce-free operation, as well as the superior reliability associated with solid state devices.
i ntegrated c ircuits d ivision www.ixysic.com 2 r03 LCA701 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. parameter ratings units blocking voltage 100 v p reverse input voltage 5 v input control current 50 ma peak (10ms) 1 a input power dissipation 1 150 mw total power dissipation 2 800 mw esd rating, human body model 8 kv isolation voltage, input to output (60 seconds) 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 1.33 mw / c 2 derate linearly 6.67 mw / c absolute maximum ratings @ 25?c parameter conditions symbol min typ max units output characteristics load current, continuous ac/dc configuration 1 -i l -- 1.5 a rms / a dc dc-only configuration 2.5 a dc peak load current t=10ms i lpk --5 a p on-resistance 2 ac/dc configuration i f =5ma, i l =1.5a r on - 0.2 0.3 ? dc-only configuration i f =5ma, i l =2.5a - 0.06 0.09 off-state leakage current v l =100v p i leak -- 1 ? a switching speeds turn-on i f =5ma, v l =10v t on - 1.95 4 ms turn-off t off - 0.45 1 output capacitance v l =0v, f=1mhz - - 200 - pf input characteristics input control current to activate 3 i l =1a i f - 0.14 2 ma input control current to deactivate - i f 0.1 - - ma input voltage drop i f =10ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r --10 ? a common characteristics input to output capacitance - c i/o -3 - pf 1 load current derates linearly from 1.5a @ 25oc to 0.75a @ 85oc. 2 measurement taken within one second of turn-on time. 3 for applications requiring high temperature operation (t a > 60oc) a led current of 5ma is recommended. electrical characteristics @ 25?c
i ntegrated c ircuits d ivision LCA701 www.ixysic.com 3 r03 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written specifications, please contact our application department. led forward voltage (v) 1.220 1.225 1.230 1.235 1.240 1.245 1.250 device count (n) 0 5 10 15 20 25 30 typical led forward voltage drop (n=50, i f =5ma) turn-on time (ms) 1.65 1.80 1.95 2.10 2.25 2.40 2.55 device count (n) 0 5 10 15 20 25 typical turn-on time (n=50, i f =5ma, i l =75ma) turn-off time (ms) 0.410 0.425 0.440 0.455 0.470 0.485 0.500 device count (n) 0 5 10 15 20 typical turn-off time (n=50, i f =5ma, i l =75ma) led current (ma) 0.105 0.120 0.135 0.150 0.165 0.180 device count (n) 0 5 10 15 20 25 typical i f for switch operation (n=50, i l =1a) on-resistance ( : ) 0.190 0.195 0.200 0.205 0.210 0.215 0.220 device count (n) 0 5 10 15 20 25 typical on-resistance distribution (n=50, i f =2ma, i l =1a) blocking voltage (v p ) 105 106 107 108 109 110 111 device count (n) 0 5 10 15 20 25 30 35 typical blocking voltage distribution (n=50, i f =0ma) led current (ma) 0 1020304050 turn-on time (ms) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 typical turn-on time vs. led forward current (i l =75ma) led current (ma) 0 1020304050 turn-off time (ms) 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 typical turn-off time vs. led forward current (i l =75ma) temperature (oc) -40 -20 0 20 40 60 80 100 turn-on time (ms) 0 1 2 3 4 5 6 7 8 9 typical turn-on time vs. temperature (i l =75ma) i f =2ma i f =5ma i f =10ma temperature (oc) -40 -20 0 20 40 60 80 100 turn-off time (ms) 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 typical turn-off time vs. temperature (i l =75ma) i f =2ma i f =5ma i f =10ma led forward voltage (v) 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 led forward current (ma) 0 10 20 30 40 50 led forward voltage vs. led forward current temperature (oc) -40 -20 0 20 40 60 80 100 led forward voltage (v) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 typical led forward voltage drop vs. temperature i f =50ma i f =20ma i f =10ma i f =5ma i f =2ma performance data @25oc (unless otherwise noted)*
i ntegrated c ircuits d ivision www.ixysic.com 4 r03 LCA701 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written specifications, please contact our application department. temperature (oc) -40 -20 0 20 40 60 80 100 led current (ma) 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 typical i f for switch operation vs. temperature (i l =1a) temperature (oc) -40 -20 0 20 40 60 80 100 on-resistance ( : ) 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 typical on-resistance vs. temperature ac/dc configuration (i f =5ma, i l =1a) temperature (oc) -40 -20 0 20 40 60 80 100 on-resistance ( : ) 0.02 0.04 0.06 0.08 0.10 0.12 0.14 typical on-resistance vs. temperature dc-only configuration (i f =5ma, i l =1a) load current (ma) -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 load voltage (v) -0.4 -0.3 -0.2 -0.1 0.0 0.1 0.2 0.3 0.4 typical load current vs. load voltage (i f =2ma) temperature (oc) -40 -20 0 20 40 60 80 100 load current (a) 0.6 0.8 1.0 1.2 1.4 1.6 maximum load current vs. temperature (i f =5ma) temperature (oc) -40 -20 0 20 40 60 80 100 leakage current (na) 0 100 200 300 400 500 600 leakage current vs. temperature measured across pins 4&6 (v l =100v) load voltage (v) 0 20 40 60 80 100 output capacitance (pf) 0 50 100 150 200 250 output capacitance vs. load voltage (i f =0ma, f=1mhz) time 10 p s 100 p s 1ms 10ms 100ms 1s 10s 100s load current (a) 1 2 3 4 5 6 7 8 9 energy rating curve temperature (oc) -40 -20 0 20 40 60 80 100 normalized change (%) -10 -5 0 5 10 blocking voltage change (%) normalized to 25oc performance data @25oc (unless otherwise noted)*
i ntegrated c ircuits d ivision LCA701 www.ixysic.com 5 r03 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. ixys integrated circuits division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating LCA701 / LCA701s msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time LCA701 / LCA701s 250oc for 30 seconds board wash ixys integrated circuits division recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since ixys integrated circuits division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. e 3 pb
i ntegrated c ircuits d ivision www.ixysic.com 6 r03 LCA701 LCA701 LCA701s dimensions mm (inches) pcb land pattern 0.254 0.0127 (0.010 0.0005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 9.524 0.508 (0.375 0.020) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 1.651 0.254 (0.065 0.010) pin 1 dimensions mm (inches) pcb hole pattern 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 5.080 0.127 (0.200 0.005) 6 - 0.800 dia. (6 - 0.031 dia.) 0.254 0.0127 (0.010 0.0005) 9.144 0.508 (0.360 0.020) 7.239 typ (0.285 typ) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 4.064 typ (0.160 typ) 0.457 0.076 (0.018 0.003) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 1.651 0.254 (0.065 0.010) pin 1 mechanical dimensions
i ntegrated c ircuits d ivision specification: ds-LCA701-r03 ?copyright 2012, ixys integrated circuits division optomos ? is a registered trademark of ixys integrated circuits division all rights reserved. printed in usa. 12/22/2012 for additional information please visit our website at: www.ixysic.com 7 LCA701 ixys integrated circuits division makes no representations or warranties with respect to the accuracy or completeness of the co ntents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity a re expressed or implied. except as set forth in ixys integrated circuits division?s standard terms and conditions of sale, ixys integrated circuits division assumes no liability whatsoever, a nd disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infri ngement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of ixys integrated circuits division?s product may resul t in direct physical harm, injury, or death to a person or severe property or environmental damage. ixys integrated circuits division reserves the right to discontinue or make changes to its p roducts at any time without notice. LCA701str tape & reel notes: 1. all dimensions carry tolerances of eia standard 481-2 2. the tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 dimensions mm (inches) embossment embossed carrier 330.2 dia (13.00 dia) top cover tape thickness 0.102 max (0.004 max) w=16.00 (0.63) b 0 = 10.10 (0.398) a 0 = 10.10 (0.398) p = 12.00 (0.472) k 1 = 3.80 (0.15) k 0 = 4.90 (0.19) user direction of feed
|
