amplifier, power, 2w 7.1-11.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 1 MAAP-000069-pkg003 rohs compliant features ? 2 watt saturated output power level ? variable drain voltage (6-10v) operation ? msag ? process description the MAAP-000069-pkg0003 is a 4-stage 2 w power ampli- fier with on-chip bias networks in a 20 lead mlp package, allowing easy assembly. this product is fully matched to 50 ohms on both the input and output. it can be used as a power amplifier stage or as a driver stage in high power applications. each device is 100% rf tested to ensure performance compliance. the part is fabricated using m/a-com?s gaas multifunction self-aligned gate (msag) process. m/a-com?s msag? process feat ures robust silicon-like manufacturing processes, plana r processing of ion implanted transistors and multiple implant capability enabling power, low-noise, switch and digital fets on a single chip. the use of refractory metals and the abs ence of platinum in the gate metal formulation prevents hydrogen poisoning when em- ployed in hermetic packaging. yyww ap069g xxxx macom yyww ap069g xxxx macom yyww ap069g xxxx macom 1. t b = mmic base temperature 2. adjust v gg between ?2.6 and ?1.2v to achieve specified idq. parameter symbol typical units bandwidth f 7.1-11.7 ghz output power p out 33 dbm 1-db compression point p1db 32 dbm small signal gain g 31 db input vswr vswr 1.8:1 gate current i gg 2 ma drain current i dd 960 ma output vswr vswr 2.0:1 power added efficiency pae 27 % output third order intercept toi 44 dbm output third order intermod, p out = 25 dbm (dcl) im3 45 dbc electrical characteristics: t b = 30c 1 , z 0 = 50 , v dd = 8v, i dq = 760ma 2 , p in = 4 dbm, r g = 100 primary applications ? point-to-point radio ? 7, 8 and 11 ghz bands also available in: description die part number maapgm0069-die die sample board MAAP-000069-smb004 die mechanical sample MAAP-000069-mch000 packaged sample board MAAP-000069-smb003 (lead free) ceramic package maapgm0069
amplifier, power, 2w 7.1-11.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 2 MAAP-000069-pkg003 rohs compliant maximum ratings 3 operating instructions this device is static sensitive. please handle with care. to operate the device, follow these steps. 1. apply v gg = -2.7 v, v dd = 0 v. 2. ramp v dd to desired voltage, typically 8.0 v. 3. adjust v gg to set i dq , (approximately @ ?2.0 v). 4. set rf input. 5. power down sequence in reverse. turn v gg off last. characteristic symbol min typ max unit drain voltage v dd 6.0 8.0 10.0 v gate voltage v gg -2.6 -2.0 -1.2 v input power p in 8.0 10.0 dbm thermal resistance jc 12.4 c/w mmic base temperature t b note 5 c recommended operating conditions 4 parameter symbol absolute maximum units input power p in 13.0 dbm drain supply voltage v dd +12.0 v gate supply voltage v gg -3.0 v quiescent drain current (no rf) i dq 1.22 a junction temperature t j 170 c storage temperature t stg -55 to +150 c quiescent dc power dissipated (no rf) p diss 12.2 w 3. operation beyond these limits may result in permanent damage to the part. 4. operation outside of these ranges may reduce product reliability. 5. mmic base temperature = 170c ? jc * v dd * i dq
amplifier, power, 2w 7.1-11.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 3 MAAP-000069-pkg003 rohs compliant figure 2. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. figure 1. 5x5 mm 20-lead mlp. refer to m/a-com application note surface mounting instructions for pqfn packages #s2083 * for assembly guidelines. additional precaution: all parts must receive a bake-out of 125oc for 24 hours prior to any solder reflow operation. *application notes can be found by going to the site search p age of m/a-com?s web page (http://www.macom.com/application%20note s/ index.htm) ) and searching for th e required application note. 100pf (as close to the package as possible) 0.1 f v dd 100pf (as close to the package as possible) yyww ap069g xxxx macom 0.1 f v gg 100pf (as close to the package as possible) 100pf (as close to the package as possible)
amplifier, power, 2w 7.1-11.7 ghz m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. rev ? advance information 4 MAAP-000069-pkg003 rohs compliant figure 3. demonstration board pn MAAP-000069-smb003 (available upon request). yyww ap069g xxxx macom
|