mates with: bstc, bstcm, bstcr, bstcrsm, bsts, tbstc, tbstcm, tbsts, tbstcm, tbsts, tshc, tshcr, tshcre, tshcrsm, tshr, tshre, tshs, tshscm, ttshc, ttshcr, ttshcre, ttshr, ttshre, ttshs, ttshsm products cut to specific sizes are uncancellable/nonreturnable parts are subject to change without notice specifications insertion force - single contact only - h plating: 1.8oz. (0,50n) avg with .0197 (0,50mm) sq. pin withdrawal force - single contact only - h plating: 0.6oz. (0,17n) avg with .0197 (0,50mm) sq. pin current rating: 2.0 ampere insulation resistance: 1000m ? min. dielectric withstanding: 500v ac contact resistance: 20 m ? max. operating temperature: -40c to + 105c max. process temperature: peak: 260c up to 10 secs. process: 230c up to 60 secs. wave: 260c up to 6 secs. reflow: 260c up to 10 secs. manual solder: 350c up to 5 secs. materials contact material: phosphor bronze insulator material: nylon 6t plating: au or sn over 50" (1,27) ni 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com row specification d = dual row pins per row lsmbc-2 xx d xx ordering information 02 xx 01 - 40 packing information tr-p = tape and reel with plastic pick and place pad tb-p = tube with plastic pick and place pad tb-0 = tube without pick and place pad if left blank, packaging at mle's discretion pad may be metal, mylar or plastic xx x v xxx vertical polarized position leave blank if not needed if required, specify empty pin position, e.g. 012 for pin 12 surface mount plating options matte tin all over t 10 gold on contact area / matte tin on tail gt g 10 gold on contact area / flash on tail 30 gold on contact area / matte tin on tail h gold flash over entire pin f lf lead free alignment pin leave blank if not needed ap = with major league electronics .079 cl low profile - surface mount box contact - vertical 13 feb 07 LSMBC-2-DV series low profile - surface mount box contact .079 cl dual row - vertical - dual entry
|