? semiconductor components industries, llc, 2007 february, 2007 ? rev. 6 1 publication order number: MBR2515L/d MBR2515L switchmode power rectifier features and benefits ? low forward voltage ? low power loss/high efficiency ? high surge capacity ? 100 c operating junction temperature ? 25 a total ? pb?free packages are available* applications ? power supply ? output rectification ? power management ? instrumentation mechanical characteristics ? case: epoxy, molded ? epoxy meets ul 94, v?0 @ 0.125 in ? weight: 1.9 grams (approximately) ? finish: all external surfaces corrosion resistant and terminal leads are readily solderable ? lead temperatures for soldering purposes: 260 c max. for 10 seconds ? esd rating: human body model 3b machine model c *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. device package shipping ordering information MBR2515L to?220 to?220ac case 221b style 1 50 units/rail schottky barrier rectifier 25 amperes, 15 volts 4 1 3 MBR2515Lg to?220 (pb?free) 50 units/rail http://onsemi.com 3 4 1 a = assembly location y = year ww = work week g = pb?free package b2515l = device code ka = diode polarity ay wwg b2515l ka marking diagram
MBR2515L http://onsemi.com 2 maximum ratings rating symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 15 v average rectified forward current (t c = 91 c per device) i f(av) 25 a peak repetitive forward current, per leg (square wave, 20 khz, t c = 95 c) i frm 25 a non?repetitive peak surge current (surge applied at rated load conditions, halfwave, single phase, 60 hz) i fsm 150 a peak repetitive reverse surge current (2.0 s, 1.0 khz) i rrm 1.0 a storage temperature range t stg ?65 to +125 c operating junction temperature t j ?65 to +100 c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may af fect device reliability. thermal characteristics characteristic conditions symbol max unit maximum thermal resistance, junction?to?case min. pad r jc 1.0 c/w maximum thermal resistance, junction?to?ambient min. pad r ja 70 electrical characteristics characteristic symbol min typical max unit instantaneous forward voltage (note 1) (i f = 25 amps, t j = 25 c) (i f = 25 amps, tj = 70 c) (i f = 19 amps, tj = 70 c) v f ? ? ? 0.41 0.37 0.34 0.45 0.42 0.38 v instantaneous reverse current (note 1) (rated dc voltage, tj = 25 c) (rated dc voltage, tj = 70 c) i r ? ? 1.0 24 15 200 ma 1. pulse test: pulse width = 300 s, duty cycle 2.0%.
MBR2515L http://onsemi.com 3 figure 1. typical forward voltage figure 2. maximum forward voltage v f , instantaneous forward voltage (v) v f , instantaneous forward voltage (v) 0.5 0.4 0.3 0.2 0.1 0 0.1 1.0 10 100 0.1 1.0 10 100 i f , instantaneous forward current (a) 0.6 25 c i f , instantaneous forward current (a ) 100 c 70 c 0.5 0.4 0.3 0.2 0.1 0 0. 6 25 c 100 c 70 c figure 3. typical reverse current figure 4. current derating, case, per leg v r , reverse voltage (v) 10 5.0 0.1 1.0 10 1000 i r , reverse current (ma) 15 figure 5. current derating, ambient, per leg figure 6. forward power dissipation t a , ambient temperature ( c) i f(av) , average forward current (a) 75 50 25 0 00 8.0 10 14 i f(av) , average forward current (a) 100 p f(av) , average power dissipation (w) 14 12 8.0 6.0 2.0 02 6 100 25 c 100 c 70 c 12 4.0 6.0 4.0 2.0 10 20 18 16 24 22 t j = 100 c dc square wave 20 22 18 16 12 14 10 8.0 4.0 6.0 2.0 dc square wave dc t c , case temperature ( c) 0 4 8 12 16 80 85 90 95 100 10 5 square i f(av) , average forward current (a) 75 20 24 28 dc r ja = 16 c/w r ja = 70 c/w (no heat sink) 32 36 40
MBR2515L http://onsemi.com 4 package dimensions to?220 plastic case 221b?04 issue d b r j d g l h q t u a k c s 4 13 dim min max min max millimeters inches a 0.595 0.620 15.11 15.75 b 0.380 0.405 9.65 10.29 c 0.160 0.190 4.06 4.82 d 0.025 0.035 0.64 0.89 f 0.142 0.147 3.61 3.73 g 0.190 0.210 4.83 5.33 h 0.110 0.130 2.79 3.30 j 0.018 0.025 0.46 0.64 k 0.500 0.562 12.70 14.27 l 0.045 0.060 1.14 1.52 q 0.100 0.120 2.54 3.04 r 0.080 0.110 2.04 2.79 s 0.045 0.055 1.14 1.39 t 0.235 0.255 5.97 6.48 u 0.000 0.050 0.000 1.27 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. f style 1: pin 1. cathode 2. n/a 3. anode 4. cathode on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5773?3850 MBR2515L/d switchmode is a trademark of semiconductor components industries, llc. literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
