S7U4E001A01 sensing evaluation unit e-series basic package z epsons ah-6120 high accuracy 6 dof sensor z wireless connection via zigbee z wired connection via usb z multiple configurations z data logging capabilities ? descriptions the multifunction sensor evaluation unit the S7U4E001A01 perform a variety of sensing tasks. S7U4E001A01 have a six-axis sensor, which consis ts of three epson gyroscopes that provide high accuracy and stability on three axis and a triaxial accelerometer with a dynam ic range of 6 g, a triaxial geomagnetic sensor, and a pressure sensor. this evaluation unit is available with either a zigbee or a usb interface for easy connection to a pc. this also come with some accessory boards t hat can be used to freely expand the interfaces and power source for use in an even wider range of evaluation environments. ? specifications z sensors 6dof sensor (ah-6120lr) + 3 axis e-compass + pressure sensor - gyro (3 axis) range: +/-1000 dps, sampling frequency: up to 100hz - acceleration (3 axis) range: +/-6 g, sampling frequency: up to 100hz - e-compass (3 axis) range: 0. 6 mt, sensitivity: 0.3 ut/lsb - pressure sensor range: 300 to 1100hpa, accuracy: +/-300 pa z interface zigbee, usb, uart, micr o sd card (with aaa battery board) z power supply coin battery (battery life 1h), aaa battery (battery life 20h), usb bus power z unit size (w x h x t) 40 x 35 x 40 mm ? evaluation kit z main unit (3 boards are assembled) - sensor board - coin battery board - zigbee board z aaa battery / sd card slot board z usb interface board z connector fan-out board z zigbee / usb adaptor z acrylic board z screws block diagrams of main unit ? ? g 4 ???` usb ?` Q?` zigbee ?` ?` ?` main unit usb interface board acrylic board zigbee adaptor aaa battery / sd card board connector fan-out board seiko epson corporation
S7U4E001A01 ? evaluation by windows pc windows pc evaluation software zigbee zigbee / usb adaptor S7U4E001A01 evaluation board/kit and development tool important notice 1. this evaluation board/kit or development tool is designed fo r engineering evaluation, demonstration, or development purposes only. do not use it for any other purpose. it is not intended to meet the requirements of design for a finished product. 2. this evaluation board/kit or development tool is intended for use by an el ectronics engineer and is not a consumer product. the user should use these goods properly and safely. se iko epson does not assume any responsibility or liability of any kind if damage a nd/or fire is caused by its use. the user s hould cease to use the evaluat ion board/kit or development tool when any abnormal issue oc curs, even during proper and safe use. 3. the part used for this evaluation board/kit or development tool may be changed without any notice. notice: no part of this material may be reproduced or duplicated in any fo rm or by any means without the written permission of seiko ep son. seiko epson reserves the right to make c hanges to this material without notice. se iko epson does not assume any liability of a ny kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, furt her, there is no representation that this material is app licable to products requiring high level reliab ility, such as, medical products. moreo ver, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that any thing made in accordance with this material will be free from any patent or copy right infringement of a third party. this material or portions thereof may contain technology or the subject relati ng to strategic products under the control of the foreign exchange and foreign trade la w of japan and may require an export license from the ministry of economy, trade and industry or other approval from another government ag ency. all brands or product names mentioned herein are trademarks and/ or registered trademarks of t heir respective companies. ? seiko epson corporation 2011, all rights reserved microdevices operations division epson s y stem p roducts website http://www.epson.jp/e/products/device/micro_system/ system business development group device sales & marketing department 421-8 hino, hino-shi, tokyo 191-8501, japan document code: 4121750 00 first issue july, 2011 2 phone: +81-42-587-8291 fax: +81-42-587-5116
|
