shottky barrier diode rb050l-40 ? applications ? dimensions (unit : mm) ? land size figure (unit : mm) general rectification ? features 1) small power mold type. (pmds) 2) low i r 3) high reliability. ? construction silicon epitaxial planar ? structure ? taping specifications (unit : mm) ? absolute maximum ratings (ta=25c) symbol unit v rm v v r v io a i fsm a tj c tstg c ? electrical characteristics (ta=25c) symbol min. typ. max. unit conditions v f 1 - - 0.55 v i f =3.0a v f 2 - - 0.50 v i f =1.5a reverse current i r --1ma v r =40v reverse voltage (dc) 40 average rectified forward current 3 parameter limits reverse voltage (repetitive peak) 40 forward voltage storage temperature ? 40 to ? 125 (*1)mounted on epoxy board. 180half sine wave parameter forward current surge peak (60hz ? 1cyc) 70 junction temperature 125 pmds 2.0 4.2 2.0 4.00.1 2.90.1 4.00.1 2.00.05 1.550.05 5.50.05 1.750.1 120.2 1.55 9.50.1 0.3 5.30.1 0.05 2.8max rohm : pmds jedec : sod-106 manufacture date 5 3 0.10.02 0.1 2.60.2 2.00.2 5.00.3 1.20.3 4.50.2 1.50.2 1/3 2013.06 - rev.e data sheet www.rohm.com ? 2012 rohm co., ltd. all rights reserved.
rb050l-40 ? electrical characteristic curves (ta=25c) 0.1 1 10 100 1000 0.001 0.1 10 1000 rth(j-a) rth(j-c) mounted on epoxy board 1ms im=100ma if=1a 300us time 0 50 100 150 200 250 300 0.1 1 10 100 t ifsm 0 5 10 15 20 ave:9.3ns ta=25 if=0.5a ir=1a irr=0.25*ir n=10pcs forward voltagevf(mv) vf-if characteristics forward current:if(a) reverse current:ir(ua) reverse voltagevr(v) vr-ir characteristics capacitance between terminals:ct(pf) reverse voltage:vr(v) vr-ct characteristics vf dispersion map forward voltage:vf(mv) reverse current:ir(ua) ir dispersion map capacitance between terminals:ct(pf) ct dispersion map ifsm disresion map peak surge forward current:ifsm(a) peak surge forward current:ifsm(a) number of cycles ifsm-cycle characteristics peak surge forward current:ifsm(a) time:t(ms) ifsm-t characteristics time:t(s) rth-t characteristics transient thaermal impedance:rth (/w) forward power dissipation:pf(w) average rectified forward currentio(a) io-pf characteristics trr dispersion map reverse recovery time:trr(ns) 0.01 0.1 1 10 0 100 200 300 400 500 600 ta=-25 ta=125 ta=75 ta=25 0.01 0.1 1 10 100 1000 10000 100000 1000000 0 5 10 15 20 25 30 35 40 ta=125 ta=75 ta=25 ta=-25 1 10 100 1000 0 5 10 15 20 25 30 f=1mhz 480 490 500 510 520 530 ave:503.8mv ta=25 if=3a n=30pcs 0 10 20 30 40 50 60 70 80 90 100 ta=25 vr=40v n=30pcs ave:9.069ua 500 510 520 530 540 550 560 570 580 590 600 ave:579.1pf ta=25 f=1mhz vr=0v n=10pcs 0 50 100 150 200 1 10 100 8.3ms ifsm 1cyc 8.3ms 0 50 100 150 200 ave:157.0a 8.3ms ifsm 1cyc 0 1 2 3 4 5 012345 dc d=1/2 sin(?180) 2/3 2013.06 - rev.e www.rohm.com ? 2013 rohm co., ltd. all rights reserved. datasheet
rb050l-40 0 2 4 6 8 10 0 10203040 0 1 2 3 4 5 6 7 0 25 50 75 100 125 0 1 2 3 4 5 6 7 0 25 50 75 100 125 reverse power dissipation:p r (w) reverse voltage:vr(v) vr-p r characteristics ambient temperature:ta() derating curve?(io-ta) average rectified forward current:io(a) average rectified forward current:io(a) case temparature:tc() derating curve?(io-tc) sin(?180) dc d=1/2 sin(?180) dc d=1/2 t tj=125 d=t/t t vr io vr=20v 0a 0v sin(?180) dc d=1/2 t tj=125 d=t/t t vr io vr=20v 0a 0v 0 5 10 15 20 25 30 c=200pf r=0 c=100pf r=1.5k ave:17.6kv no break at 30kv electrostatic discharge test esd(kv) esd dispersion map 3/3 2013.06 - rev.e www.rohm.com ? 2013 rohm co., ltd. all rights reserved. datasheet
r1102 a www.rohm.com ? 2013 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes the information contained herein is subject to change without notice. before you use our products, please contact our sales representative and verify the latest specifica- tions : although rohm is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. rohm shall have no responsibility for any damages arising out of the use of our poducts beyond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14)
|
