advanced power n-channel enhancement mode electronics corp. power mosfet simple drive requirement bv dss 40v low on-resistance r ds(on) 4m fast switching characteristic i d 160a halogen free & rohs compliant product description absolute maximum ratings symbol units v ds v v gs v i d @t c =25 a i d @t c =25 a i d @t c =100 a i dm a p d @t c =25 w p d @t a =25 w t stg t j symbol value units rthj-c maximum thermal resistance, junction-case 0.8 /w rthj-a 40 /w data and specifications subject to change without notice AP9963GS-HF halogen-free product parameter rating drain-source voltage 40 gate-source voltage + 20 continuous drain current, v gs @ 10v 3 80 continuous drain current (chip) 160 -55 to 175 continuous drain current, v gs @ 10v 3 80 pulsed drain current 1 300 storage temperature range total power dissipation 187 -55 to 175 total power dissipation 4 3.75 201201061 thermal data parameter 1 maximum thermal resistance, junction-ambient (pcb mount) 4 operating junction temperature range a dvanced power mosfets from apec provide the designer with the best combination of fast switching, ruggedized device design, low on- resistance and cost-effectiveness. the to-263 package is widely preferred for commercial-industrial surface mount applications and suited for low voltage applications such as dc/dc converters. g d s g d s to-263(s)
electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =250ua 40 - - v r ds(on) static drain-source on-resistance 2 v gs =10v, i d =40a - - 4 m ? v gs =4.5v, i d =30a - - 5 m ? v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =30a - 80 - s i dss drain-source leakage current v ds =32v, v gs =0v - - 25 ua i gss gate-source leakage v gs =+ 20v, v ds =0v - - + 100 na q g total gate charge i d =30a - 25 40 nc q gs gate-source charge v ds =32v - 6.5 - nc q gd gate-drain ("miller") charge v gs =4.5v - 14 - nc t d(on) turn-on delay time v ds =20v - 11 - ns t r rise time i d =30a - 62 - ns t d(off) turn-off delay time r g =2.4 -30- ns t f fall time v gs =10v - 9 - ns c iss input capacitance v gs =0v - 2800 4500 pf c oss output capacitance v ds =25v - 590 - pf c rss reverse transfer capacitance f=1.0mhz - 165 - pf r g gate resistance f=1.0mhz - 1.6 3.2 source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =40a, v gs =0v - - 1.2 v t rr reverse recovery time i s =10a, v gs =0 v , - 41 - ns q rr reverse recovery charge di/dt=100a/s - 47 - nc notes: 1.pulse width limited by max. junction temperature. 2.pulse test 3.package limitation current is 80a. this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. apec does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 2 AP9963GS-HF 4.surface mounted on 1 in 2 copper pad of fr4 board
AP9963GS-HF fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 0 40 80 120 160 0.0 1.0 2.0 3.0 4.0 v ds , drain-to-source voltage (v) i d , drain current (a) t c =175 o c 10v 7.0v 6.0v 5.0v v g =4.0v 0 50 100 150 200 250 300 0.0 1.0 2.0 3.0 4.0 v ds , drain-to-source voltage (v) i d , drain current (a) t c =25 o c 10v 7.0v 6.0v 5.0v v g =4.0v 0.2 0.8 1.4 2.0 -50 0 50 100 150 200 t j , junction temperature ( o c) normalized r ds(on) i d =40a v g =10v 2.6 3 3.4 3.8 4.2 246810 v gs , gate-to-source voltage (v) r ds(on) (m ) i d =30a t c =25 0 10 20 30 40 0 0.2 0.4 0.6 0.8 1 1.2 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =175 o c 0.0 0.4 0.8 1.2 1.6 -50 0 50 100 150 200 t j , junction temperature ( o c ) normalized v gs(th) (v)
AP9963GS-HF fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. maximum continuous drain current fig 12. gate charge waveform v.s. case temperature 4 1 10 100 1000 0.01 0.1 1 10 100 v ds ,drain-to-source voltage (v) i d (a) t c =25 o c s in g le puls e 100us 1ms 10ms 100ms dc 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 t , pulse width (s) normalized thermal response (r thjc ) p dm duty factor = t/t peak t j = p dm x r thjc + t c t t 0.02 0.01 0.05 0.1 0.2 duty factor = 0.5 single pulse 0 2 4 6 8 10 0 1020304050 q g , total gate charge (nc) v gs , gate to source voltage (v) i d =30a v ds =20v v ds =24v v ds =32v 0 1000 2000 3000 4000 1 5 9 13 17 21 25 29 v ds ,drain-to-source voltage (v) c (pf) f=1.0mhz c iss c oss c rss q v g 4.5v q gs q gd q g charge operation in this area limited by r ds(on) 0 50 100 150 200 25 50 75 100 125 150 175 t c , case temperature ( o c ) i d , drain current (a) limited by package
|
