TA8410P/k/ak 2001-06-13 1 toshiba bipolar linear integrated circuit silicon monolithic TA8410P,ta8410k,ta8410ak dual power operational amplifier the ta8410 series are a dual power operational amplifier. it is intended for use especially dc motor positioning system applications such as arm driver (for audiodisk players), head or voice coil motor drivers (for floppy and hard disk drivers) and any other power driver applications. features built ? in over current protector few external parts required output current up to 600 ma (ave) package TA8410P : dip16 ta8410k / ak : hsip 10 block diagram weight dip16 ? p ? 300 ? 2.54a : 1.0 g (typ.) hsip10 ? p ? 2.54 : 3.0 g (typ.)
TA8410P/k/ak 2001-06-13 2 pin function pin no. symbol functional description 1 (9) v sense2 amp.2 output current sensing terminal. 2 ( ? ) nc non connection 3 (10) v cc possitive ? side voltage supply terminal. 4 (5) v ee 5 ( ? ) v ee negative ? side voltage supply terminal. 6 ( ? ) nc non connection 7 ( ? ) nc non connection 8 (1) v sense1 amp.1 output current sensing terminal. 9 (2) v out1 amp.1 output terminal. 10 (3) ? v in1 amp.1 input terminal ( ? ) 11 (4) +v in1 amp.1 input terminal (+) 12 ( ? ) v ee 13 ( ? ) v ee negative ? side voltage supply terminal. 14 (6) +v in2 amp.2 input terminal (+) 15 (7) ? v in2 amp.2 input terminal ( ? ) 16 (8) v out2 amp.2 output terminal. ( ): ta8410k, ta8410ak maximum ratings (ta = 25c) characteristic symbol rating unit TA8410P ta8410k +9 supply voltage ta8410ak v cc v ee +15 v output current i o (ave) 0.6 a TA8410P 1.4 (note 1) ta8410k 1.4 (note 2) power dissipation ta8410ak p d 12.5 (note 3) w operating temperature t opr ? 30~75 c storage temperature t stg ? 55~150 c note 1: no heat sink note 2: 60 30 1.6 mm pcb mounting occupied copper area in excess of 50%. note 3: tc = 25c
TA8410P/k/ak 2001-06-13 3 electrical characteristics unless otherwise specified, ta = 25c, (TA8410P / k, v cc = 9 v, v ee = ? 9 v) (ta8410ak, v cc = 15 v, v ee = ? 15 v) characteristic symbol test cir ? cuit test condition min typ. max unit quiescent current i cc D D D 7 18 ma input off set current i io D D D 0 100 na input bias current i i D D D 100 700 na input off set voltage v io D D D 0 6 mv v oh ? 1 D r l = 7.4 7.6 D upper v oh ? 2 D i o = 0.6 a 5.5 6.2 D v ol ? 1 D r l = 7.4 7.7 D TA8410P ta8410k lower v ol ? 2 D i o = 0.6 a 5.6 6.2 D v oh ? 1 D r l = 13.0 13.6 D upper v oh ? 2 D i o = 0.6 a 11.0 11.6 D v ol ? 1 D r l = 13.0 13.6 D output voltage swing ta8410k lower v ol ? 2 D i o = 0.6 a 11.0 11.7 D v open loop gain g vo D D D 100 D db TA8410P ta8410k cmr D g v = 40 db 8.0 8.3 D input common mode voltage range ta8410ak cmr D g v = 40 db 14.0 14.3 D v common mode rejection ratio cmrr D D 70 82 D db supply voltage rejection ratio svrr D D 76 90 D db unity gain cross frequency f t D open loop D 1.0 D mhz slew rate sr D r l = 33 ? D 0.5 D v / s short circuit current i sc D r sc = 1.0 ? D 0.6 D a cross talk c t D r l = 33 ? , v out = 1 v p ? p D 60 D db test circuit
TA8410P/k/ak 2001-06-13 4
TA8410P/k/ak 2001-06-13 5
TA8410P/k/ak 2001-06-13 6 application circuit 1 application 2 (drive circuit for cd player motors) note: utmost care is necessary in the design of the output line, v cc and v ee line since ic may be destroyed due to short ? circuit between outputs, air contamination fault, or fault by improper grounding.
TA8410P/k/ak 2001-06-13 7 package dimensions dip16 ? p ? 300 ? 2.54a unit: mm weight: 1.0 g (typ.)
TA8410P/k/ak 2001-06-13 8 package dimensions hsip10 ? p ? 2.54 unit: mm weight: 3.0 g (typ.)
TA8410P/k/ak 2001-06-13 9 ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. ? the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. ? the products described in this document are subject to the foreign exchange and foreign trade laws. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. ? the information contained herein is subject to change without notice. 000707eb a restrictions on product use
|
