View ARD72024_6637424.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

rd (ard) high frequency characteristics (impedance 50 ? ) notes: *1 the 6ghz type only has the above characteristics up to 6ghz. *2 18 to 26.5ghz characteristics can be applied 26.5ghz type only (spdt, transfer) ordering information addition of 6ghz high reliability rd coaxial switch (spdt) for communications market rd coaxial switches (ard) frequency to 1 ghz 1 to 4 ghz 4 to 8 ghz* 1 8 to 12.4 ghz 12.4 to 18 ghz 18 to 26.5 ghz* 2 v. s.w .r. (max.) 1.1 1.15 1.25 1.35 1.5 1.7 v. s.w .r. (sp6t with termination) (max.) 1.20 1.40 1.50 insertion loss (db. max.) 0.2 0.3 0.4 0.5 0.8 isolation (db. min.) 85 80 70 65 60 55 6ghz type compliance with rohs directive features 1. excellent high frequency characteristics (50 ? , to 26.5ghz) 2. spdt, transfer and sp6t types are av ailable. 3. high sensitivity nominal operating power: 840 mw (spdt/sp6t, fail-safe type, with indicator) 1,540 mw (transfer, fail-safe type, with indicator) *without 24v type 4. long-lasting life: min. 5 10 6 5. with termination type is added. (sp6t) thanks to the addition of termination, steady high frequency characteristics can be maintained when contacts are either open or closed and this contributes to increase system reliability. 6. + com type is available. typical applications wireless and mobile communication ?cellular phone base station ?ampli?r switching digital broadcasting ?broadcasting relay station ?broadcasting equipment measuring instrument all types of inspection equipment please inquire beforehand if you are thinking of using this product in applications that involve low level load or high frequency of switching. ne w frequency 1: to 18ghz (spdt) 2: to 18ghz (transfer) 3: to 13ghz (sp6t) 5: to 26.5ghz (spdt) 6: to 26.5ghz (transfer) 7: to 6ghz (spdt) rd coaxial switches ard operating function 00: fail-safe (with indicator) 20: latching (with indicator) 51: latching with ttl driver (spdt, transfer) (with self cut-off function) (with indicator) 02: fail-safe (without indicator) 22: latching (without indicator) 53: latching with ttl driver (spdt) (with self cut-off function) (without indicator) nominal operating voltage, v dc 4h: 05: 12: 12 24: 24 4.5 (fail-safe, latching type only) 5 (latching with ttl driver type only) operation terminal nil: c: solder terminal connector cable (spdt type only) termination (sp6t type only) nil: z: no termination with termination hf data attached nil: q: no hf test data attached hf test data attached note: sealed types also available, please consult us (spdt only) all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) types 1. spdt 1) solder terminal note: standard packing; carton: 1 pc. case: 20 pcs. 2) connector cable note: standard packing; carton: 1 pc. case: 10 pcs. 2. transfer note: standard packing; carton: 1 pc. case: 10 pcs. 3. sp6t note: standard packing; carton: 1 pc. case: 5 pcs. operating function nominal operating v oltage, v dc 6ghz type 18ghz type 26.5ghz type no hf datasheet attached no hf datasheet attached hf datasheet attached no hf datasheet attached hf datasheet attached fail-safe (with indicator) 4.5 ard7004h ard1004h ard1004hq ard5004h ard5004hq 12 ard70012 ard10012 ard10012q ard50012 ard50012q 24 ard70024 ard10024 ard10024q ard50024 ard50024q latching (with indicator) 4.5 ard7204h ard1204h ard1204hq ard5204h ard5204hq 12 ard72012 ard12012 ard12012q ard52012 ard52012q 24 ARD72024 ard12024 ard12024q ard52024 ard52024q latching with ttl driver (with self cut-off function) (with indicator) 5 ard75105 ard15105 ard15105q ard55105 ard55105q 12 ard75112 ard15112 ard15112q ard55112 ard55112q 24 ard75124 ard15124 ard15124q ard55124 ard55124q fail-safe (without indicator) 4.5 ard7024h 12 ard70212 24 ard70224 latching (without indicator) 4.5 ard7224h 12 ard72212 24 ard72224 latching with ttl driver (with self cut-off function) (without indicator) 5 ard75305 12 ard75312 24 ard75324 operating function nominal operating v oltage, v dc 18ghz type 26.5ghz type no hf datasheet attached hf datasheet attached no hf datasheet attached hf datasheet attached fail-safe 4.5 ard1004hc ard1004hcq ard5004hc ard5004hcq 12 ard10012c ard10012cq ard50012c ard50012cq 24 ard10024c ard10024cq ard50024c ard50024cq latching 4.5 ard1204hc ard1204hcq ard5204hc ard5204hcq 12 ard12012c ard12012cq ard52012c ard52012cq 24 ard12024c ard12024cq ard52024c ard52024cq latching with ttl driver (with self cut-off function) 5 ard15105c ard15105cq ard55105c ard55105cq 12 ard15112c ard15112cq ard55112c ard55112cq 24 ard15124c ard15124cq ard55124c ard55124cq operating function nominal operating v oltage, v dc 18ghz type 26.5ghz type no hf datasheet attached hf datasheet attached no hf datasheet attached hf datasheet attached fail-safe 4.5 ard2004h ard2004hq ard6004h ard6004hq 12 ard20012 ard20012q ard60012 ard60012q 24 ard20024 ard20024q ard60024 ard60024q latching 4.5 ard2204h ard2204hq ard6204h ard6204hq 12 ard22012 ard22012q ard62012 ard62012q 24 ard22024 ard22024q ard62024 ard62024q latching with ttl driver (with self cut-off function) 5 ard25105 ard25105q ard65105 ard65105q 12 ard25112 ard25112q ard65112 ard65112q 24 ard25124 ard25124q ard65124 ard65124q operating function nominal operating v oltage, v dc 13ghz type no hf datasheet attached hf datasheet attached fail-safe 4.5 ard3004h ard3004hq 12 ard30012 ard30012q 24 ard30024 ard30024q latching 4.5 ard3204h ard3204hq 12 ard32012 ard32012q 24 ard32024 ard32024q ne w all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) 4. sp6t (with termination) note: standard packing; carton: 1 pc. case: 5 pcs. rating 1. coil data (1) spdt 1) fail-safe type 2) latching type 3) latching with ttl driver type (2) transfer 1) fail-safe type 2) latching type 3) latching with ttl driver type (with self cut-off function) (3) sp6t and sp6t (with termination type) 1) fail-safe type 2) latching type operating function nominal operating v oltage, v dc 13ghz type no hf datasheet attached hf datasheet attached fail-safe 4.5 ard3004hz ard3004hzq 12 ard30012z ard30012zq 24 ard30024z ard30024zq latching 4.5 ard3204hz ard3204hzq 12 ard32012z ard32012zq 24 ard32024z ard32024zq nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) (at 20 c 68 f ) nominal power consumption, mw with indicator without indicator with indicator without indicator 4.5 186.7 155.6 840 700 12 70.0 58.3 24 40.4 29.2 970 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) (at 20 c 68 f ) nominal power consumption, mw with indicator without indicator with indicator without indicator 4.5 155.6 111.1 700 500 12 62.5 41.7 750 24 37.5 16.7 900 nominal operating voltage, v dc ttl logic level (see ttl logic level range) electronic self cut-off switching frequency on off 5 2.4 to 5.5v 0 to 0.5v available max. 180 cpm (on time : off time = 1 : 1) 12 24 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) (at 20 c 68 f ) nominal power consumption, mw 4.5 342.2 1540 12 128.3 24 69.6 1670 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) (at 20 c 68 f ) nominal power consumption, mw 4.5 266.7 1200 12 104.2 1250 24 58.3 1400 nominal operating voltage, v dc ttl logic level (see ttl logic level range) electronic self cut-off switching frequency on off 5 2.4 to 5.5v 0 to 0.5v available max. 180 cpm (on time : off time = 1 : 1) 12 24 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) (at 20 c 68 f ) nominal power consumption, mw 4.5 186.7 840 12 70.0 24 40.4 970 nominal operating voltage, v dc nominal operating current, ma (+10%/?5%) (at 20 c 68 f ) nominal power consumption, mw 4.5 set: 155.6 / reset (all): 933.6 set: 700 / reset (all): 4,200 12 set: 62.5 / reset (all): 375.0 set: 750 / reset (all): 4,500 24 set: 37.5 / reset (all): 225.0 set: 900 / reset (all): 5,400 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) ?operating voltage range 1) fail-safe type 2) latching type 3) latching with ttl driver type (with self cut-off function) 0 4 32 24 28 8 16 12 20 0 2 16 12 14 4 8 6 10 ?5?0 0?0 20 ambient temperature c voltage vdc 12 v 0 0.75 6 4.5 5.25 1.5 3 2.25 3.75 4.5 v 24 v 8540 60 nominal voltage allowable range for use recommended operation voltage range recommended release voltage range 0 4 32 24 28 8 16 12 20 0 2 16 12 14 4 8 6 10 ?5?0 0?0 20 8540 60 ambient temperature c 12 v 0 0.75 6 4.5 5.25 1.5 3 2.25 3.75 4.5 v 24 v allowable range for use recommended set/reset voltage range nominal voltage 0 4 32 24 28 8 16 12 20 0 2 16 12 14 4 8 6 10 ?5?0 0?0 20 8540 60 ambient temperature c 12 v 0 0.83 6.67 5 5.83 1.67 3.33 2.5 4.17 5 v 24 v nominal voltage allowable range for use recommended set/reset voltage range 4) ttl logic level range note: please consult us for use that is outside this range. ambient temperature c voltage vdc 0 0.5 5.5 4 3 2.4 5 1 2 ?5?0 0?0 20 8540 60 on off all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) 2. speci?ations 1) spdt/transfer notes: *1 factors such as heating of the connected connector in?ence the high frequency characteristics; therefore, please verify under actual conditions of use. *2 the 6ghz type only has the above characteristics up to 6ghz. *3 18 to 26.5ghz characteristics can be applied 26.5ghz type only (spdt, transfer) *4 the upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. re f er to [6] ambient environment in general application guidelines. characteristics item speci?ations contact arrangement spdt transfer contact material gold plating initial contact resistance max. 100m ? (by voltage drop 6v dc 1a) rating contact input power 120w (at 3ghz) (v.s.w.r. 1.15 or less, no contact switching, ambient temperature 40 c 104 f [spdt], 25 c 77 f [transfer])* 1 nominal operating power fail-safe 840mw (4.5v, 12v dc), 970mw (24v dc) 1,540mw (4.5v, 12v dc), 1,670mw (24v dc) latching 700mw (4.5v dc), 750mw (12v dc), 900mw (24v dc) 1,200mw (4.5v dc), 1,250mw (12v dc), 1,400mw (24v dc) indicator rating (with indicator type only) contact rating max. 30v 100ma initial contact resistance max. 1 ? (measured by 5v 100ma) min. switching capacity (reference value) 3v dc, 0.1ma (5 10 6 , reliability level: 10% (3k ? )) high frequency characteristics (impedance 50 ? ) to 1 ghz 1 to 4 ghz 4 to 8 ghz* 2 8 to 12.4 ghz 12.4 to 18 ghz 18 to 26.5 ghz* 3 v. s.w .r. (max.) 1.1 1.15 1.25 1.35 1.5 1.7 insertion loss (db, max.) 0.2 0.3 0.4 0.5 0.8 isolation (db, min.) 85 80 70 65 60 55 electrical characteristics insulation resistance (initial) min. 1,000 m ? (at 500 v dc) measurement at same location as ?reakdown voltage (initial) section. breakdown voltage (initial) between open contacts 500 vrms for 1 min. (detection current: 10ma) between contact and coil 500 vrms for 1 min. (detection current: 10ma) between contact and earth terminal 500 vrms for 1 min. (detection current: 10ma) between coil and earth terminal 500 vrms for 1 min. (detection current: 10ma) time characteristics (at 20 c 68 f ) operate time max. 15ms (nominal operating voltage applied to the coil, excluding contact bounce time.) max. 20ms (nominal operating voltage applied to the coil, excluding contact bounce time.) mechanical characteristics shock resistance functional min. 500 m/s 2 (half-wave pulse of sine wave: 11ms, detection time: 10 s.) destructive min. 1,000 m/s 2 (half-wave pulse of sine wave: 11ms.) vibration resistance functional 10 to 55 hz at double amplitude of 3mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 5mm expected life mechanical 6ghz type: min. 10 6 18 and 26.5ghz type: min. 5 10 6 (all types, at 180 cpm) min. 5 10 6 (at 180 cpm) electrical high frequency contact (hot switch) 6ghz type: min. 10 6 18 and 26.5ghz type: min. 5 10 6 (all types, 5w to 3ghz, impedance 50 ? , v. s.w .r.; max. 1.2) (at 20 cpm) min. 5 10 6 (5w to 3ghz, impedance 50 ? , v.s.w.r.; max. 1.2) (at 20 cpm) indicator (with indicator type only) 5 v dc, 10 ma, min. 10 6 (at 20 cpm) conditions conditions for operation, transport and storage* 4 ambient temperature: ?5 c to +85 c ?7 f to +185 f humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) unit weight approx. 50g 1.76oz approx. 110g 3.88oz all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) 2) sp6t notes: *1 factors such as heating of the connected connector in?ence the high frequency characteristics; therefore, please verify under actual conditions of use. *2 the upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. re f er to [6] ambient environment in general application guidelines. characteristics item speci?ations contact arrangement sp6t contact material gold plating initial contact resistance max. 100m ? (by voltage drop 6v dc 1a) rating contact input power no termination 120 w (at 3ghz) (v.s.w.r. 1.15 or less, no contact switching, ambient temperature 25 c 77 f )* 1 with termination 2w (at 3ghz) (v.s.w.r. 1.15 or less, no contact switching, ambient temperature 25 c 77 f )* 1 nominal operating power fail-safe 840mw (4.5v, 12v dc), 970mw (24v dc) latching 700mw (4.5v dc), 750mw (12v dc), 900mw (24v dc) indicator rating contact rating max. 30v 100ma initial contact resistance max. 1 ? (measured by 5v 100ma) min. switching capacity (reference value) 3v dc, 0.1ma (5 10 6 , reliability level: 10% (3k ? )) high frequency characteristics (impedance 50 ? ) to 1 ghz 1 to 4 ghz 4 to 8 ghz 8 to 13 ghz v. s . w .r. (max.) no termination 1.1 1.15 1.25 1.35 with termination 1.20 1.40 1.50 insertion loss (db, max.) 0.2 0.3 0.4 isolation (db, min.) 85 80 70 65 electrical characteristics insulation resistance (initial) min. 1,000 m ? (at 500 v dc) measurement at same location as ?reakdown voltage (initial) section. breakdown voltage (initial) between open contacts 500 vrms for 1 min. (detection current: 10ma) between contact and coil 500 vrms for 1 min. (detection current: 10ma) between contact and earth terminal 500 vrms for 1 min. (detection current: 10ma) between coil and earth terminal 500 vrms for 1 min. (detection current: 10ma) time characteristics (at 20 c 68 f ) operate time max. 20ms (nominal operating voltage applied to the coil, excluding contact bounce time.) mechanical characteristics shock resistance functional min. 500 m/s 2 (half-wave pulse of sine wave: 11ms, detection time: 10 s.) destructive min. 1,000 m/s 2 (half-wave pulse of sine wave: 11ms.) vibration resistance functional 10 to 55 hz at double amplitude of 3mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 5mm expected life mechanical min. 5 10 6 (at 180 cpm) electrical high frequency contact (hot switch) no termination min. 5 10 6 (5w to 3ghz, impedance 50 ? , v.s.w.r.; max. 1.2) (at 20 cpm) with termination min. 5 10 6 (2w to 3ghz, impedance 50 ? , v.s.w.r.; max. 1.2) (at 20 cpm) indicator (with indicator type only) 5 vdc, 10 ma, min. 10 6 (at 20 cpm) conditions conditions for operation, transport and storage* 2 ambient temperature: ?5 c to +85 c ?7 f to +185 f humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) unit weight approx. 320g 11.29oz all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) reference data 1-(1). high frequency characteristics (spdt) 6ghz type sample: ard70012 measuring method: measured with agilent technologies network analyzer (e8363b). ?v.s.w.r. ?insertion loss ?isolation 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1.0 8ghz1ghz 4ghz 6ghz30mhz standard value v. s . w .r. frequency reference value 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 8ghz1ghz 4ghz 6ghz30mhz standard value frequency reference value insertion loss, db 0 10 20 30 40 50 60 70 80 90 100 8ghz1ghz 4ghz 6ghz30mhz standard value frequency reference value isolation, db 1-(2). high frequency characteristics (spdt) 18, 26.5ghz type sample: ard10012 measuring method: measured with agilent technologies network analyzer (hp8510). ?v.s.w.r. ?insertion loss ?isolation 1.1 1.0 1.9 1.2 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz 1.4 1.5 1.6 1.7 1.8 1.3 frequency v.s.w.r. standard value reference value 0.8 0.7 1.0 0.9 0 0.2 0.1 0.6 0.4 0.5 0.3 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz frequency insertion loss, db standard value reference value 80 90 100 0 10 20 60 70 30 40 50 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz frequency isolation, db standard value reference value 1-(3). high frequency characteristics (transfer) sample: ard60012 measuring method: measured with agilent technologies network analyzer (hp8510). ?v.s.w.r. ?insertion loss ?isolation 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz 1.1 1.0 1.9 1.2 1.4 1.5 1.6 1.7 1.8 1.3 frequency v.s.w.r. standard value reference value 0.8 0.9 1.0 0 0.1 0.2 0.6 0.7 0.3 0.4 0.5 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz frequency insertion loss, db standard value reference value 1ghz 4ghz 12.4ghz8ghz 18ghz 26.5ghz 80 70 100 90 0 20 10 60 40 50 30 isolation, db frequency standard value reference value all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) 1-(4). high frequency characteristics (sp6t) sample: ard30012 measuring method: measured with agilent technologies network analyzer (hp8510). ?v.s.w.r. ?insertion loss ?isolation 1.0 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1ghz 8ghz4ghz 13ghz 18ghz frequency v.s.w.r. standard value reference value 1.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1ghz 8ghz4ghz 13ghz 18ghz frequency insertion loss, db standard value reference value 100 0 10 20 30 40 50 60 70 80 90 1ghz 8ghz4ghz 13ghz 18ghz isolation, db frequency standard value reference value ?termination characteristics 1.0 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1ghz 8ghz4ghz 13ghz 18ghz reference value standard value v.s.w.r. frequency all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) dimensions (mm inch ) ? + com type is available * the type without indicator terminals will not have the indicator terminals that are marked with the dotted box. the cad data of the products with a cad data mark can be downloaded from: http://panasonic-electric-works.net/ac 1. spdt 1) solder terminal 6ghz type 18 and 26.5ghz types tolerance: 0.3 .012 + gnd nonc com indicator serial no. coil 3-sma connector 3.5 34.0 11.2 .441 13.2 .520 22.4 30.0 1.339 .882 1.181 7.0 .276 3.5 2.0 .138 .138 3.5 .138 .079 0.3 .012 7.2 .283 solder terminal 2-3.1 dia. 11.2 .441 2-.122 dia. 2-2.4 dia. 2-.094 dia. 4.3 .169 39.0 1.535 7.3 2.1 .287 .083 4.5 .177 fail-safe latching latching with ttl driver (with self cut-off function) nonc com coil serial no. indicator com nc n o gnd + gnd 21 com coil 1 coil 2 serial no. indicator coil com 12 gnd 2 1 gnd coil terminal indicator terminal logic 2 2 1com logic 1 serial no. 21 1 com coil gnd 2v indicator gnd v cad data all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) 2) connector cable com nc n o gnd + coil indicator serial no. d-sub connector pin contact type 25.0 3-sma connector 34.0 11.2 .441 13.2 .520 22.4 30.0 1.339 .882 1.181 30.8 .984 1.213 1 pin no. 2345 6789 7.2 .283 110.0 10 39.0 2-2.4 dia. 4.331 .394 1.535 2-.094 dia. 12.55 .494 3.05 dia. .120 dia. 5.95 .234 1.2 .047 2.1 4.5 .177 7.3 .083.287 2-3.1 dia. 2-.122 dia. tolerance: 0.3 .012 fail-safe latching latching with ttl driver (with self cut-off function) comnc no gnd indicator terminal coil terminal indicator terminal coil terminal coil 2 coil 1 com 12 gnd indicator terminal coil terminal logic 1 logic 2 v com 12 gnd ? + com type is available indicator coil pin no. 123456789 fail-safe nc com no gnd + latching 1 com 2 gnd 1 2 latching with ttl driver ? com 2 v gnd logic 1 logic 2 cad data all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) ? + com type is available 2. transfer j4 j3 j2 j1 coil gnd + nc no com serial no. indicator j3 j4 j2 j1 32.0 16.2 4-sma connector 5.08 5.08 .200 .200 45.70 55.5 1.260 .638 2.185 5.08 .200 0.30 .012 15.24 1.799 .600 2.00 .079 solder terminal 10.15 .400 9.65 .380 39.0 1.535 7.2 .283 max. 5.0 .197 16.2 .638 32.0 1.260 20.3 9.65 .799 .380 3-3.80 dia. 3-.150 dia. 1 to 1.5 .039 to .059 tolerance: 0.3 .012 fail-safe nc: j1-j2, j3-j4 no: j1-j3, j2-j4 latching pos1: j1-j2, j3-j4 pos2: j1-j3, j2-j4 latching with ttl driver pos1: j1-j2, j3-j4 pos2: j1-j3, j2-j4 j2 j4 j1 j3 fail-safe latching latching with ttl driver (with self cut-off function) no nc com gnd coil terminal indicator terminal 1 2 gnd 2 com 1 coil terminal indicator terminal v gnd logic 1 logic 2 1 com 2 coil terminal indicator terminal cad data all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) ? + com type is available. 3. sp6t japan coil j1 j6 j3 com 63 5 serial no. in made 4 j2 j4 j5 com 1 (bottm view) ind gnd 5 1 4 26 3 2 j3 j5 j2 j1 j6 com j4 7-sma jack connector 4-4.5 dia. 4-.177 dia. 80.0 7-5.08 7-.200 66.0 78.0 dia. 56.0 dia. 3.0 2.205 dia. max. 4.5 7.2 39.5 80.0 66.0 25.4 3.150 2.598 3.071 dia. .118 max. .177 .283 1.555 3.150 2.598 1.000 fail-safe type latching type indicator terminal gnd 6 j6 62 j2 1 2 com j1 com 1 coil terminal 2 36 24 1 5 gnd ind (bottm view) 1 com j5 j4 j2 4 made in serial no. 5 36 com j3 j6 j1 coil japan com 63 5 41 gnd 5 14 26 3 2 indicator terminal coil terminal *reset (all) 1 (bottm view) ind gnd 5 1 4 26 3 26 43 5 serial no. in made japan com coil j1 j6 j3 j2 com j4 j5 r indicator terminal gnd 6 j6 62 j2 1 2 com j1 com 1 coil terminal *r r com 6 34 1 gnd 52 6 34 15 2 indicator terminal coil terminal tolerance: 0.3 .012 cad data all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) 4. sp6t (with termination) 66.0 2.598 4-4.5 dia. 4-.177 dia. 80.0 3.150 78.0 dia. 3.071 dia. 7-5.08 7-.200 56.0 dia. 2.205 dia. j5 j4 com j2 j3 j6 j1 coil com japa n made in serial no. 5 34 6 2 36 24 1 5 gnd ind (bottom view) 1 j3 j5 j2 j1 j6 j4 7-sma jack connector 6-termination com 80.066.025.4 3.1502.5981.000 max. 4.5 max. .177 39.5 1.555 7.2 .283 3.0 .118 fail-safe type latching type coil terminal 1 com j1com 21 j2 26 j6 6 gnd indicator terminal japan coil j1 j6 j3 com 63 5 serial no. in made 4 j2 j4 j5 com 1 (bottom view) ind gnd 5 1 4 26 3 2 com 63 5 41 indicator terminal coil terminal gnd 5 14 26 3 2 r coil terminal 1 com j1com 21 j2 26 j6 6 gnd indicator terminal r r j5 j4 com j2 j3 j6 j1 coil com japan made in serial no. 5 34 6 2 36 24 1 5 gnd ind (bottom view) 1 com 6 34 1 indicator terminal coil terminal gnd 52 6 34 15 2 tolerance: 0.3 .012 cad data all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
rd (ard) notes 1. for general cautions for use, please refer to the ?eneral application guidelines? 2. coil operating power pure dc current should be applied to the coil. the wave form should be rectangular. if it includes ripple, the ripple factor should be less than 5%. however, check it with the actual circuit since the characteristics may be slightly different. the nominal operating voltage should be applied to the coil for more than 50 ms to set/reset the latching type relay. please use the latching type for circuits that are continually powered for long periods of time. 3. coil connection when connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction. 4. connection of coil indicator and washing conditions 1) the connection of coil indicator terminal shall be done by soldering. soldering conditions max. 260 c 500 f (solder temp) within 10sec (soldering time) max. 350 c 662 f (solder temp) within 3sec (soldering time) 2) this product is not sealed type, therefore washing is not allowed. 5. conditions for operation, transport and storage conditions 1) temperature: ?5 to +85 c ?7 to +185 f 2) humidity: 5 to 85% rh (avoid freezing and condensation.) the humidity range varies with the temperature. use within the range indicated in the graph below. 3) atmospheric pressure: 86 to 106 kpa temperature and humidity range for usage, transport, and storage: 4) condensation condensation forms when there is a sudden change in temperature under high temperature and high humidity conditions. condensation will cause deterioration of the relay insulation. 5) freezing condensation or other moisture may freeze on the relay when the temperature is lower than 0 c 32 f . this causes problems such as sticking of movable parts or operational time lags. 6) low temperature, low humidity environments. the plastic may become brittle if the relay is exposed to a low temperature, low humidity environment for long periods of time. 6. other handling precautions. 1) the relays on/off service life is based on standard test conditions (temperature: 15 to 35 c 59 to 95 f , humidity: 25 to 75%) speci?d in jis c5442-1996. life will depend on many factors of your system: coil drive circuit, type of load, switching intervals, switching phase, ambient conditions, to name a few. 2) use the relay within speci?ations such as coil rating, contact rating and on/ off service life. if used beyond limits, the relay may overheat, generate smoke or catch ?e. 3) be careful not to drop the relay. if accidentally dropped, carefully check its appearance and characteristics before use. 4) be careful to wire the relay correctly. otherwise, malfunction, overheat, ?e or other trouble may occur. 5) the latching type relay is shipped in the reset position. but jolts during transport or impacts during installation can move it to the set position. it is, therefore, advisable to build a circuit in which the relay can be initialized (set and reset) just after turning on the power. 6) if a relay stays on in a circuit for many months or years at a time without being activated, circuit design should be reviewed so that the relay can remain non-excited. a coil that receives current all the time heats, which degrades insulation earlier than expected. a latching type relay is recommended for such circuits. 7) for sma connectors, we recommend a torque of 0.90 0.1 n? for installation, which falls within the prescribed torque of mil-c-39012. please be aware that conditions might be different depending on the connector materials and how it interacts with surrounding materials. 8) please do not use silicon based substances such as silicon rubber, silicon oil, silicon coatings and silicon ?lings, in the vicinity of the relay. doing so may cause volatile silicon gas to form which may lead to contact failure due to the adherence of silicon on the contacts when they open and close in this atmosphere. 9) please note that when switching contacts (latching type only), you must apply reset (all) voltage and release all contacts ?st. (sp6t type) 10) do not use multiple contacts simultaneously. (sp6t type) 11) the indicator terminal is the terminal that indicates the operation status of the main contact. 12) for details about the drive method of the latching with ttl driver type, please refer to the rd coaxial switch catalog on the website. tolerance range (avoid condensation when used at temperatures higher than 0 c 32 f ) (avoid freezing when used at temperatures lower than 0 c 32 f ) 5 85 temperature, c f humidity, %rh ?5 ?7 0 +32 +85 +185 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.

▲Up To Search▲

Price & Availability of ARD72024

	To Download ARD72024 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .