b135 2.5mm pitch connector for discrete wire connection hnc series features 1. full lock mechanism the connector is equipped with the full lock mechanism so as not be removed, unless locks are reset on both sides. this mechani sm is activated effectively to prevent cable hooking or mis-insertion. 2. thin type connector mounting height when the connector is used at the right angle : 4.5mm 3. mechanism to prevent mis-insertion this thin type connector is equipped with the mechanism to prevent mis- insertion. 4. tin plating and gold plating variation two kinds of tin plating and gold plating types are available, and can be chosen according to application. the tin plating is also set to a light operating touch. applications various business equipment, financial terminals thickness 4.5mm mechanism to prevent false-insertion full lock mechanism
b136 product specifications rated current (note1) rated voltage awg 22 : 3a awg 24 : 3a awg 26 : 2a awg 28 : 1a awg 30 : 0.5a 250v ac storage temperature range storage moisture range operating temperature range operating moisture range -10 ~ +60 ? ( note3 ) - 40 ~ 70 % ( note3 ) -25 ~ +85 ? ( note2 ) - 40 ~ 80 % item specification condition 1. insulation resistance 1000m ? min. measured at 500v dc 2. withstand voltage neither short or breakdown 1000v ac for 1 minute 3. contact resistance 30m ? max measured at 1a 4. insertor/extraction force 0.4n (40gf) min.,4.4n (450gf) max. measure at the square steel pin of 0.635 0.002mm 5. vibration electrical discontinuity, 1 s max. 10 ~ 55hz and single amplitude 0.75mm in 3 directions for 2 hours, respectively. 6. moisture resistance contact resistance: 10m ? max.insulation resistan ce: 1000m ? min. exposed to temperature 40 2 ? and humidity 90 ~ 95 % for 96 hours 7. temperature cycle contact resistance: 10m ? max:insulation resistance: 1000m ? min. (-25 ? : 30 minutes ? 5 ~ 35 ? : 10 minutes (- 85 ? : 30 minutes ? 5 ~ 35 ? : 10 minutes) 5 cycles 8. operating life contact resistance: 20m ? max. tin plating : 30 cycles gold plating : 50 cycles 9. resistance to soldering heat no resin area fusion to degrade performance reflow : 250 ? for 5 seconds manual soldering: soldering iron temperature: 300 ? for 2 seconds rating material product part material finish remarks crimping socket insulator polyamide black ul94v-0 contact contact phosphor copper tin plating or gold plating insulator polyamide black ul94v-0 pin header contact brass tin plating or gold plating note1: the rated current will be changed according to cable sizes for use. the header rating only t is 3a. note2: temperature rise included when energized note3: this storage indicates a long-term storage state for the unused product before the board mounted. the operating temperature and moisture ranges are applied to the non-energized state after the connector has been installed to the board. note4: the above standards represent this series. individual formal agreement should be based on the "specification". please determine the specific product. if needed, please order the product the product from the product no. as listed on catalo g page b137 to b140. ordering information crimping plug contact hnc 2 - 2.5 p - * dsl q e e r wy t hnc2 - 2.5s - c - a qw q series name : hnc w series no. : 2, 1 e contact pitch : 2.5mm r connector type s : socket p : pin header t number of contacts : 2 ~ 16, 18, 20 y contact type none : crimping socket ds : straight dip dsl : right angle dip q type: 2.5mm pitch socket w packaging type c : reel pc : bag e applicable cable size a : awg22~26 b : awg26~30
b137 note1: please order a quantity multiplied by 100 pcs. (not per bag, but per pcs.) note2: the series name of 12 contacts connector is hnc1, and partially will be changed in the style. crimping socket unit: mm product no. hrs no. hnc2-2.5s- 2( ) hnc2-2.5s- 3( ) hnc2-2.5s- 4( ) hnc2-2.5s- 5( ) hnc2-2.5s- 6( ) hnc2-2.5s- 7( ) hnc2-2.5s- 8( ) hnc2-2.5s-10( ) hnc1-2.5s-12( ) hnc2-2.5s-15( ) cl218-0011-1- cl218-0022-8- cl218-0039-0- cl218-0027-1- cl218-0042-5- cl218-0030-6- cl218-0014-0- cl218-0017-8- cl218-0008-7- cl218-0045-3- 2 3 4 5 6 7 8 10 12 15 12.4 14.9 17.4 19.9 22.4 24.9 27.4 32.4 37 44.9 number of contacts a 6 8.5 11 13.5 16 18.5 21 26 31 38.5 b 2.5 5 7.5 10 12.5 15 17.5 22.5 27.5 35 figure 1 figure 2 figure 1 c dimensions [specific no.] * * , ( * * ) none :bag packaging [figure 1] [figure 2]
b138 note1: please order a quantity multiplied by 100 pcs. (not per bag, but per piece) note2: the series name of the 12 contacts connector is hnc1 and the style will be partially changed. straight pin header unit: mm product no. hrs no. hnc2-2.5p- 2ds( ) hnc2-2.5p- 3ds( ) hnc2-2.5p- 4ds( ) hnc2-2.5p- 5ds( ) hnc2-2.5p- 6ds( ) hnc2-2.5p- 7ds( ) hnc2-2.5p- 8ds( ) hnc2-2.5p-10ds( ) hnc1-2.5p-12ds( ) hnc2-2.5p-15ds( ) cl218-0012-4- cl218-0023-0- cl218-0040-0- cl218-0028-4- cl218-0043-8- cl218-0031-9- cl218-0015-2- cl218-0018-0- cl218-0009-0- cl218-0046-6- 2 3 4 5 6 7 8 10 12 15 12.5 15 17.5 20 22.5 25 27.5 32.5 35.5 45 number of contacts a 7.8 10.4 12.9 15.4 17.9 20.4 22.8 27.8 32.8 40.4 b 2.5 5 7.5 10 12.5 15 17.5 22.5 27.5 35 figure 3 figure 4 figure 3 c number: none number: none number: none number: none number: none number: none number: none number: none number: none number: none tin plating specific no. dimensions 02 02 01 02 01 02 02 02 02 01 gold plating [figure 3] [figure 4] board through-hole diameter : 1.1 + 0 + 0.1
b139 note1: please order a quantity multiplied by 100 pcs. (not per bag, but per piece) note2: the series name of the 12 contacts connector is hnc1 and the style will be partially changed. right angle pin header unit: mm product no. hrs no. hnc2-2.5p- 2dsl( ) hnc2-2.5p- 3dsl( ) hnc2-2.5p- 4dsl( ) hnc2-2.5p- 5dsl( ) hnc2-2.5p- 6dsl( ) hnc2-2.5p- 7dsl( ) hnc2-2.5p- 8dsl( ) hnc2-2.5p-10dsl( ) hnc1-2.5p-12dsl( ) hnc2-2.5p-15dsl( ) cl218-0013-7- cl218-0024-3- cl218-0041-2- cl218-0029-7- cl218-0044-0- cl218-0032-1- cl218-0016-5- cl218-0019-3- cl218-0010-9- cl218-0047-9- 2 3 4 5 6 7 8 10 12 15 12.5 15 17.5 20 22.5 25 27.5 32.5 35.5 45 number of contacts a 7.8 10.4 12.9 15.4 17.9 20.4 22.8 27.8 32.8 40.4 b 2.5 5 7.5 10 12.5 15 17.5 22.5 27.5 35 figure 5 figure 6 figure 5 c number: none number: none number: none number: none number: none number: none number: none number: none number: none number: none tin plating specific no. dimensions 02 02 01 02 01 02 02 02 02 01 gold plating [figure 5] [figure 6] board through-hole diameter : 1.1 + 0 + 0.1
applicator ap105-hnc cl901-4502-2 hnc-2.5s-c-a/hnc-2.5s-c-b press main unit cm105 cl901-0005-4 tc-hnc-b cl250-0005-7 hnc-2.5s-d-b manual crimping tool tc-hnc-a cl250-0006-0 hnc-2.5s-d-a extraction tool df1-c-po cl550-0177-7 hnc-2.5s-c-a/hnc-2.5s-c-b b140 crimping contact for socket conductor size (contact wire construction) jacket diameter awg 22 ( 17pieces. /0.16mm ) awg 24 ( 11pieces. /0.16mm ) ? 1.35 ~? 1.7mm awg 26 ( 0 7pieces. /0.16mm ) awg 28 ( 0 7pieces. /0.127mm ) ? 1.0 ~? 1.35mm awg 30 ( 0 7pieces. /0.1mm ) applicable cable (tin plated annealing copper wire) recommended cable ul1061, ul1007 strip length 2.8 ~ 3.3mm note: if other cables are used instead of the applicable cable, please contact hirose sales department. note: if a trouble has occurred due to tools which are not designated by hirose, hirose won't guarantee any product. unit: mm product no. hrs no. hnc-2.5s-d-a( ) hnc-2.5s-c-a( ) hnc-2.5s-d-b( ) hnc-2.5s-c-b( ) cl218-0037-5- cl218-0021-5- cl218-0038-8- cl218-0020-2- awg 22 ~ 26 awg 26 ~ 30 1.8 1.8 1.5 1.5 conductor size a 2.6 2.6 1.7 1.7 b reel bag reel bag ? 1.35 ~ 1.7mm ? 1.0 ~ 1.35mm packaging type number: none tin plating specific no. jacket diameter 100 10,000 100 10,000 quantity 02 gold plating applicable crimping tool type product no. hrs no. applicable contact application pattern
b141 b precautions for use 1. recommended soldering condition flow condition by automatic soldering unit soldering temperature: 250 5 ? , soldering time: within 3 seconds manual soldering condition soldering iron temperature: 290 10 ? , soldering time: within 2 seconds 2. cleaning condition refer to the "nylon connector instruction manual". 3. connection condition refer to the "nylon connector instruction manual". extracting crimping contact to extract the crimping contact from the socket housing, observe the following extraction procedures. extraction tool tool name: df-c-po(cl550-0177-7) can be used. (1) extraction method as shown below in the figure, slightly pull the cable in the state where the df1 extraction tool tip or the 0.5 to 0.7mm board has been inserted in the lance fixed slot, the contact can be easily removed. note: if the lance is pressed excessively, the contact body may be deformed, which could result in contact failure. therefore, be careful not to press the lance excessively. (2) how to adjust the lance (raise) to re-insert the terminal which is removed from the socket housing, use a sharp edge blade to raise the lance as shown below in the illustration, and then insert the contact. note: lance regeneration is effective only once.
|
