a73 pc card socket connector complies with pc card standard ic1 series features 1. compliant with pc card standards polarized entry prevents wrong insertion into a corresponding connector. and sequential contact engagement prevents electorostatic discharge, avoiding possible damage to sensitive board circuits. 2. suited to automatic mounting packaged for a board placement with aoutmated equipment. 3. lead offset available with several board termination levels,to allow use of different height board components. in relation to the center line of connector,- 0.2mm,+0.3mm,+0.55mm,+0.9mm and terminations on board center are available. materials part material finish remarks insulator contact pps color : black contact area : gold plating lead area : solder plating ul94v-0 ----------------- product specifications 500 v dc 500 v ac / 1 minute 1 ma frequency: 10 to 2000 hz, single amplitude of 1.52 mm or acceleration of 147 m/s 2 (peak), 4 hours in each of the 3 directions. 96 hours at temperature of 40? and humidity of 90% to 95% -55 ? , 30 min / 15 to 30 ? , within 5 min / 85 ? , 30 min / 15 to 35 ? , within 5 min, for 5 cycles 10000 cycles at 400 to 600 cycles per hour reflow: at the recommended temperature profile manual soldering: 300? for 3 seconds 1000m ? min. no flashover or insulation breakdown. 40 m ? max. (initial value) (note 3) no electrical discontinuity of 100ns or more insulation resistance: 100 m ? min. no damage, cracks, or parts looseness. change of contact resistance from the start should be 20 m ? max. no deformation of components affecting performance. 1. insulation resistance 2. withstanding voltage 3. contact resistance 4. vibration 5. humidity (steady state) 6. temperature cycle 7. durability (insertion/withdrawal) 8. resistance to soldering heat ratings 0.5 a 125 v ac current rating voltage rating operating temperature -55 ? to +85 ? (note 1) operating humidity 95% r.h. max. (no condensation) storage temperature -40 ? to +70 ? (note 2) storage humidity 40% to 70% (note 2) item specification conditions note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. ic1k,ic1ha:phosphor bronze others:beryllium copper the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a74 ordering information ic1 f - * * r d - 1.27 sh 1 5 4 6 2 3 7 series name : ic1 bb: compliant with pc card standards connector thickness: 2.8mm f: compliant with pc card standards connector thickness: 2.7mm ha: compliant with pc card standards connector thickness: 2.7mm lead offset type k: compliant with pc card standards connector thickness: 2.7mm suited to automatic mounting contacts: 40, 68 r: card connector d: 2-row arrangement contact pitch: 1.27mm mounting method sh: two sided board terminations sha : two sided board terminations sf: single surface mount type. sfa: single surface mount type. sfb: single surface mount type. 1 2 3 4 5 6 7 68 contacts card connectors ic1k-68rd-1.27sfa cl640-0047-2 b pcb mounting pattern connector thickness : 2.7mm lead offset type suited to automatic mounting single surface mount type ic1k-68rd-1.27sf ic1k-68rd-1.27sfa ic1k-68rd-1.27sfb 2 2 3 0.3 0.9 ------- 640-0046-0 640-0047-2 640-0048-5 a b 5 5 6 c cl no. part number unit:mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a75 68 contacts connector connector thickness:2.7mm single surface mount type ic1f-68rd-1.27sf cl640-0035-3 ic1f-68rd-1.27sf ic1f-68rd-1.27sfa 640-0035-3 640-0040-3 0.3 0.854 a cl no. part number unit:mm 68 contacts connector compliant with pc card standard compliant with pc card standard ic1f-68rd-1.27sh cl640-0013-0 connector thickness:2.7mm two sided board termination on the center line ?recommended board thickness : 0.4 to 0.5mm the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a76 68 contacts connector compliant with pc card standard ic1bb-68rd-1.27sh cl640-0036-6 connector thickness:2.8mm two sided board termination on the center line ? recommended board thickness : 0.4 to 0.5mm connector thickness:2.7mm two sided board terminations two mounting levels of board terminations 68 contacts connector compliant with pc card standard ic1ha-68rd-1.27sh cl640-0044-4 ic1ha-68rd-1.27sh ic1ha-68rd-1.27sha 640-0044-4 640-0045-7 cl no. part number ?recommended board thickness : 0.4 to 0.5mm for 0.45mm board thickness 1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
