jq specifications contact expected electrical life (min. operations) coil (at 20 c 68 f ) #1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. high electrical & mechanical noise immunity relay jq relays standard type high capacity type arrangement 1 form a, 1 form c initial contact resistance, max. (by voltage drop 6 v dc 1 a) 100 m ? contact material agsno 2 type rating (resistive) nominal switching capacity 1a 5 a 125 v ac, 2 a 250 v ac, 5 a 30 v dc 10 a 125 v ac, 5 a 250 v ac, 5 a 30 v dc 1c n.o. 5 a 125 v ac, 2 a 250 v ac, 3 a 30 v ac 10 a 125 v ac, 5 a 250 v ac, 5 a 30 v dc n.c. 2 a 125 v ac, 1 a 250 v ac, 1 a 30 v dc 3 a 125 v ac, 2 a 250 v ac, 1 a 30 v dc max. switching power 1a 625 va, 150 w 1,250 va, 150 w 1c n.o. 625 va, 90 w 1,250 v ac, 150 w n.c. 250 va, 30 w 500 v ac, 30 w max. switching voltage 250 v ac, 110 v dc (0.3a) max. switching current n.o.: 5 a n.c.: 2 a n.o.: 10 a n.c.: 3 a min. switching capacity #1 (reference value) 100 ma, 5 v dc expected mechanical life (at 180 cpm)(min. operations) 10 7 t ype switching capacity no. of operations standard type 1a 5 a 125 v ac 3 a 125 v ac 2 a 250 v ac 5 a 30 v dc 5 10 4 2 10 5 2 10 5 10 5 1c n.o. 5 a 125 v ac 2 a 250 v ac 3 a 30 v dc 5 10 4 2 10 5 10 5 n.c. 2 a 125 v ac 1 a 250 v ac 1 a 30 v dc 2 10 5 2 10 5 10 5 high capacity type 1a 10 a 125 v ac 5 a 250 v ac 5 a 30 v dc 5 10 4 5 10 4 10 5 1c n.o. 10 a 125 v ac 5 a 250 v ac 5 a 30 v dc 5 10 4 5 10 4 10 5 n.c. 3 a 125 v ac 2 a 250 v ac 1 a 30 v dc 2 10 5 2 10 5 10 5 nominal operating power 1a: 200 mw 1c: 400 mw vde mm inch features high electrical noise immunity high switching capacity in a compact package high sensitivity: 200 mw (1a), 400 mw (1c) high surge voltage: 8,000 v between contacts and coil ul, csa, vde, semko approved and t?v available class b coil insulation type also av ailable. about cd-free contacts we have introduced cadmium free type products to reduce environmental hazardous substances. (the suf? ? should be added to the part number) please replace parts containing cadmium with cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. 20 10 15.6 .787 .394 .614 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd. compliance with rohs directive
jq characteristics remarks * speci?ations will vary with foreign standards certi?ation ratings. * 1 measurement at same location as ?nitial breakdown voltage section * 2 detection current: 10 ma * 3 wa ve is standard shock voltage of 1.2 50 s according to jec-212-1981 * 4 excluding contact bounce time * 5 measured conditions * 6 half-wave pulse of sine wave: 11ms; detection time: 10 s * 7 half-wave pulse of sine wave: 6ms * 8 detection time: 10 s * 9 re f er to 6. conditions f or ope r ation, t r anspo r t and sto r age mentioned in ambient envi r onment . * 10 when using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% v for each 1 c 33.8 f with 20 c 68 f as a reference) and use a coil impressed voltage that is within the maximum allowable voltage range. typical applications ?air conditioners ?refrigerators ?microwave ovens ?heaters ordering information max. operating speed 20 cpm initial insulation resistance* 1 min. 1,000 m ? at 500 v dc initial breakdown voltage* 2 between open contacts 1a: 1,000 vrms for 1 min. 1c: 750 vrms for 1 min. between contacts and coil 4,000 vrms for 1 min. surge voltage between contact and coil* 3 8,000 v operate time* 4 (at nominal voltage) (at 20 c 68 f ) max. 20 ms release time* 4 (at nominal voltage) (without diode) (at 20 c 68 f ) max. 10 ms temperature rise* 5 (coil) max. 45 c shock resistance functional* 6 294 m/s 2 {30 g} destructive* 7 980 m/s 2 {100 g} vibration resistance functional* 8 10 to 55 hz at double amplitude of 1.6 mm destructive 10 to 55 hz at double amplitude of 2.0 mm conditions for operation, transport and storage* 9 (not freezing and condensing at low temperature) ambient temp.* 10 ?0 c to +85 c ?0 f to +185 f humidity 5 to 85% r.h. unit weight approx. 7 g . 25 oz standard type resistance method, nominal voltage applied to the coil. contact carrying current: 5 a, at 70 c 158 f high capacity type resistance method, nominal voltage applied to the coil. contact carrying current: 10 a, at 70 c 158 f contact arrangement 1a: 1 form a 1: 1 form c nil: standard p: high capacity 5, 6, 9, 12, 18, 24, 48* v contact capacity nil: class e coil insulation b: class b coil insulation coil insulation class f: agsno 2 type contact materialcoil voltage (dc) ul/csa, vde, semko approved type is standard. notes: 1a p bex. jq 12 fv 1. standard packing: carton: 100 pcs. case: 500 pcs. 2. *available only for 1 form c type 3. please inquire about the previous products (cadmium containing parts). all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
jq types and coil data at 20 c 68 f note) class b coil insulation type also available: ex) jq1a- ? -12v-f ? : input the following letter, class b: b. dimensions mm inch part no. nominal v oltage, v dc pick-up v oltage, v dc (min.) drop-out v oltage, v dc (min.) nominal operating current, ma nominal operating power, mw coil resistance, ? ( 10%) max. allowable v oltage, v dc 1 form a standard type jq1a-5v-f 5 3.75 0.25 40 200 125 180% of nominal voltage (at 20 c 68 f ) jq1a-6v-f 6 4.5 0.3 33.3 180 jq1a-9v-f 9 6.75 0.45 22.2 405 jq1a-12v-f 12 9 0.6 16.7 720 jq1a-18v-f 18 13.5 0.9 11.1 1,620 jq1a-24v-f 24 18 1.2 8.3 2,880 high capacity type jq1ap-5v-f 5 4 0.25 40 200 125 130% of nominal voltage (at 85 c 185 f ) jq1ap-6v-f 6 4.8 0.3 33.3 180 jq1ap-9v-f 9 7.2 0.45 22.2 405 jq1ap-12v-f 12 9.6 0.6 16.7 720 jq1ap-18v-f 18 14.4 0.9 11.1 1,620 jq1ap-24v-f 24 19.2 1.2 8.3 2,880 1 form c standard type jq1-5v-f 5 3.75 0.25 80 400 62.5 150% of nominal voltage (at 20 c 68 f ) jq1-6v-f 6 4.5 0.3 66.7 90 jq1-9v-f 9 6.75 0.45 44.4 202.5 jq1-12v-f 12 9 0.6 33.3 360 jq1-18v-f 18 13.5 0.9 22.2 810 jq1-24v-f 24 18 1.2 16.7 1,440 jq1-48v-f 48 36 2.4 8.3 5,760 high capacity type jq1p-5v-f 5 4 0.25 80 400 62.5 110% of nominal voltage (at 85 c 185 f ) jq1p-6v-f 6 4.8 0.3 66.7 90 jq1p-9v-f 9 7.2 0.45 44.4 202.5 jq1p-12v-f 12 9.6 0.6 33.3 360 jq1p-18v-f 18 14.4 0.9 22.2 810 jq1p-24v-f 24 19.2 1.2 16.7 1,440 jq1p-48v-f 48 38.4 2.4 8.3 5,760 1 form a 1 form c dimension : gener al toler ance max. 1mm .039 inch 0.2 .008 1 to 5mm .039 to .118 inch 0.3 .012 min. 5mm .118 inch 0.4 .016 20 15.6 4.2 0.4 10.16 7.62 7.62 7.62 10 0.3 0.3 0.5 dia. 0.8 .787 .614 .165 .016 .400 .300 .300.300 .394 .012 .012 .020 dia. .031 4.2 0.4 20 15.6 10.16 5.08 .200 2.54 7.62 7.62 0.3 0.3 0.3 0.5 dia. 0.8 10 .165 .016 .787 .614 .400 .100 .300.300 .012 .012 .012 .020 dia. .031 .394 schematic (bottom view) 1 form a 1 form c coil com n.o. coil com n.o. n.c. pc board pattern (bottom view) 1 form a1formc tolerance: 0.1 .004 4-1.3 dia. 7.62 7.62 10.16 4-.051 dia. .300 .300 .400 5-1.3 dia. 7.62 7.62 10.16 2.54 5-.051 dia. .300 .300 .400 .100 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
jq reference data standard type max. switching capacity (1 form a type) max. switching capacity (1 form c type) ac resistive load (high capacity type) ac resistive load (standard type) 1 10 100 250 1,000 10 100 5 contact voltage, v contact current, a 1 10 100 250 1,000 10 100 2 3 5 contact voltage, v contact current, a ac resistive load (high capacity type) n.o. side ac resistive load (high capacity type) n.c. side ac resistive load (standard type) n.o. side ac resistive load (standard type) n.c. side 1-(1). operate & release time (1 form a type) tested sample: jq1a-12v-f, 25 pcs. 1-(2). operate & release time (1 form c type) tested sample: jq1-24v-f, 25 pcs. 2. life curve ambient temperature: room temperature 80 100 120 150 2 0 4 6 8 coil applied voltage, %v operate & release time, ms operate time release time max. max. min. min. 80 100 120 150 2 0 4 6 8 coil applied voltage, %v operate & release time, ms operate time release time min. min. max. max. 100 10 1 1 02345 contact current, a 125v ac resistive load 250v ac resistive load life, 10 4 3-(1). coil temperature rise (1 form a type) contact carrying current: 3 a, 5 a measured portion: inside the coil 3-(2). coil temperature rise (1 form c type) contact carrying current: 3 a, 5 a measured portion: inside the coil 100 110 120 130 140 160 190180170150 10 20 30 40 50 0 coil applied voltage, %v temperature rise, c 3 a at 85 c 5 a at 85 c 3 a at 70 c 5 a at 70 c 100 110 120 130 140 160150 10 20 30 40 50 60 70 0 coil applied voltage, %v temperature rise, c 3 a at 70 c 5 a at 70 c 5 a at 85 c 3 a at 85 c 4-(1). ambient temperature characteristics (1 form a type) tested sample: jq1a-24v-f contact carrying current: 3 a, 5 a 4-(2). ambient temperature characteristics (1 form c type) tested sample: jq1-24v-f contact carrying current: 3 a, 5 a 1 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 130 c 266 f ) (carrying current: 3 a) 2 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 130 c 266 f ) (carrying current: 5 a) 3 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 115 c 239 f ) (carrying current: 3 a) 4 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 115 c 239 f ) (carrying current: 5 a) 5 pick-up voltage with a hot-start condition of 100%v on the coil (carrying current: 5 a) 6 pick-up voltage with a hot-start condition of 100%v on the coil (carrying current: 3 a) 7 pick-up voltage 20 30 40 50 60 70 80 90 0 100 200 300 400 ambient temperature, c coil applied voltage, %v 1 5 6 4 7 3 2 20 30 40 50 60 70 80 90 0 100 200 300 400 ambient temperature, c coil applied voltage, %v 1 3 4 5 7 6 2 all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
jq high capacity type notes for cautions f or us e , see rel a y t e c hnical in f ormation . 1-(1). operate & release time (1 form a type) tested sample: jq1ap-12v-f, 25 pcs. 1-(2). operate & release time (1 form c type) tested sample: jq1p-12v-f, 25 pcs. 2. life curve ambient temperature: room temperature 80 100 120 150 2 0 4 6 8 coil applied voltage, %v operate & release time, ms operate time release time min. min. max. max. 80 100 120 150 2 0 4 6 8 coil applied voltage, %v operate & release time, ms operate time release time min. min. max. max. 100 10 1 2 046810 contact current, a 125v ac resistive load 250v ac resistive load life, 10 4 3-(1). coil temperature rise (1 form a type) contact carrying current: 5 a, 10 a measured portion: inside the coil 3-(2). coil temperature rise (1 form c type) contact carrying current: 5 a, 10 a measured portion: inside the coil 100 120 140 160 180 10 20 30 40 50 60 70 0 coil applied voltage, %v temperature rise, c 10 a at 70 c 10 a at 85 c 5 a at 70 c 5 a at 85 c coil applied voltage, %v temperature rise, c 100 110 120 130 140 150 160 10 20 30 40 50 60 70 0 10 a at 70 c 10 a at 85 c 5 a at 70 c 5 a at 85 c 4-(1). ambient temperature characteristics (1 form a type) tested sample: jq1ap-24v-f contact carrying current: 5 a, 10 a 4-(2). ambient temperature characteristics (1 form c type) tested sample: jq1p-24v-f contact carrying current: 5 a, 10 a 1 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 130 c 266 f ) (carrying current: 5 a) 2 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 130 c 266 f ) (carrying current: 10 a) 3 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 115 c 239 f ) (carrying current: 5 a) 4 allowable ambient temperature against % coil voltage (max. inside the coil temperature set as 115 c 239 f ) (carrying current: 10 a) 5 pick-up voltage with a hot-start condition of 100%v on the coil (carrying current: 10 a) 6 pick-up voltage with a hot-start condition of 100%v on the coil (carrying current: 5 a) 7 pick-up voltage 20 30 40 50 60 70 80 90 0 100 200 300 400 ambient temperature, c coil applied voltage, %v 1 5 4 7 6 3 2 20 30 40 50 60 70 80 90 0 100 200 300 400 ambient temperature, c coil applied voltage, %v 1 5 7 6 2 3 4 note about relay installation orientation when installing with the relay terminals parallel to the ground, the contact terminals at the bottom and the coil terminals at the top, component friction will occur after numerous switching actions or due to vibration in the non- e xcitation state. since this may cause the relay to stop functioning when the pick-up voltage increases even if the nominal voltage is applied, please do not install using this orientation. to p bottom all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|
