spec no: dsak2752 rev no: v.3 date: nov/23/2010 page: 1 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp : 1301003106 57mm (2.3inch) single digit numeric display part number: SC23-11SURKWA hyper red description the hyper red source color devices are made with algainp on gaas substrate li ght emitting diode. package dimensions& internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . . features z 2.3 inch digit height. z low current operation. z excellent character appearance. z high light output. z easy mounting on p.c. boards or sockets. z multicolor available. z mechanically rugged. z standard : gray face, white segment. z rohs compliant.
spec no: dsak2752 rev no: v.3 date: nov/23/2010 page: 2 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp : 1301003106 selection guide part no. dice lens type iv (ucd) [1] @ 10ma min. typ. SC23-11SURKWA hyper red (algainp) white diffused 88000 260000 common cathode,rt. hand decimal. description electrical / optical characteristics at t a =25c absolute maximum ratings at t a =25c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. note: 1.luminous intensity / luminous flux: +/-15%. notes: 1. wavelength: +/-1nm. 2. forward voltage: +/-0.1v. symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d [1] dominant wavelength hyper red 630 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage per segment or (dp) hyper red 7.8 (3.9) 10.0 (5.0) v i f =20ma i r reverse current per segment or (dp) hyper red 10 (10) ua v r =5v parameter hyper red units power dissipation per segment or (dp) 300 (150) mw dc forward current per segment or (dp) 30 (30) ma peak forward current [1] per segment or (dp) 185 (185) ma reverse voltage per segment or (dp) 5 (5) v operating / storage temperature -40c to +85c lead solder temperature[2] 260c for 3-5 seconds
spec no: dsak2752 rev no: v.3 date: nov/23/2010 page: 3 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp : 1301003106 SC23-11SURKWA hyper red
spec no: dsak2752 rev no: v.3 date: nov/23/2010 page: 4 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp : 1301003106 hyper red
spec no: dsak2752 rev no: v.3 date: nov/23/2010 page: 5 of 5 approved: wynec checked: joe lee drawn: f.f.zhou erp : 1301003106 packing & label specifications SC23-11SURKWA
|
