spec no: dsak7907 rev no: v.1 date: may/24/2010 page: 1 of 6 approved: wynec checked: allen liu drawn: c.h.han er p: 1203011320 1.6x0.8x0.5mm bi-color surface mount led attention observe precautions for handling electrostatic discharge sensitive devices part number: APHB1608QBDSURKC blue hyper red features z 1.6mmx0.8mm smt led, 0.5mm thickness. z compatible with reflow soldering z available in various color combination z package: 2000pcs / reel . z moisture sensitivity level : level 3. z rohs compliant. description the blue source color devices are made with ingan light emitting diode. the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsak7907 rev no: v.1 date: may/24/2010 page: 2 of 6 approved: wynec checked: allen liu drawn: c.h.han er p: 1203011320 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APHB1608QBDSURKC blue (ingan) water clear 36 90 hyper red (algainp) 110 230 130 symbol parameter device typ. max. units test conditions peak peak wavelength blue hyper red 468 650 nm i f =20ma d [1] dominant wavelength blue hyper red 470 630 nm i f =20ma ? 1/2 spectral line half-width blue hyper red 25 28 nm i f =20ma c capacitance blue hyper red 100 35 pf v f =0v;f=1mhz v f [2] forward voltage blue hyper red 3.3 1.95 4 2.5 v i f =20ma i r reverse current blue hyper red 50 10 ua v r = 5v parameter blue hyper red units power dissipation 120 75 mw dc forward current 30 30 ma peak forward current [1] 150 185 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsak7907 rev no: v.1 date: may/24/2010 page: 3 of 6 approved: wynec checked: allen liu drawn: c.h.han er p: 1203011320 APHB1608QBDSURKC blue
spec no: dsak7907 rev no: v.1 date: may/24/2010 page: 4 of 6 approved: wynec checked: allen liu drawn: c.h.han er p: 1203011320 hyper red
spec no: dsak7907 rev no: v.1 date: may/24/2010 page: 5 of 6 approved: wynec checked: allen liu drawn: c.h.han er p: 1203011320 APHB1608QBDSURKC reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsak7907 rev no: v.1 date: may/24/2010 page: 6 of 6 approved: wynec checked: allen liu drawn: c.h.han er p: 1203011320 packing & label specifications APHB1608QBDSURKC
|
