View 5082-332E-00000_6747886.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

description this 7.62 mm (0.3 inch) led seven-segment display uses industry standard size package and pinout. the device is available in either common anode or common cathode. the choice of colors includes high efficiency red (her), green, algaas red, and yellow. the gray face displays are suitable for indoor use. features industry standard size industry standard pinout 7.62 mm (0.4 inch) character height dip lead on 2.54 mm choice of colors high efficiency red (her), green, algaas red, and yellow excellent appearance evenly lighted segments gray package gives optimum contrast 50 viewing angle design flexibility common anode or common cathode single digit left and right hand decimal point categorized for luminous intensity green and yellow categorized for color devices her green algaas red yellow description package drawing hdsp-331e hdsp-331g hdsp-331a hdsp-331y common anode, right hand and a left hand decimal hdsp-332e common anode, right hand and left a hand decimal without pin 4, 5 and 12 hdsp-333e hdsp-333g hdsp-333a hdsp-333y common cathode, right hand b decimal hdsp-334e hdsp-334g hdsp-334a hdsp-334y common cathode, right hand decimal c applications suitable for indoor use not recommended for industrial application, i.e., operating temperature requirements exceeding +85?c or below ?5?c [1] extreme temperature cycling not recommended note: 1. for additional details, please contact your local avago sales office or an authorized distributor. hdsp-331x/332e/333x/334x series 7.62 mm (0.3 inch) general purpose se v en-segment display data sheet
2 part numbering system notes: 1. for codes not listed in the figure above, please refer to the respective datasheet or contact your nearest avago representative for details. 2. bin options refer to shippable bins for a part number. color and intensity bins are typically restricted to 1 bin per tube (exceptions may apply). please refer to respective datasheet for specific bin limit information. 5082 -x x x x-x x x x x hdsp-x x x x-x x x x x mechanical options [1] 00: no mechanical option color bin options [1,2] 0: no color bin limitation maximum intensity bin [1,2] 0: no maximum intensity bin limitation minimum intensity bin [1,2] 0: no minimum intensity bin limitation device configuration/color [1] a: algaas red e: high efficiency red g: green y: yellow device specific configuration [1] refer to respective datasheet package [1] refer to respective datasheet
3 19.00 (0.748) 1.00 (0.039) 7.62 (10.300) 2 ? 1.1 (0.043) 5.20 (0.205) 10 front view hdsp-xxxx yww xz coo 0.50 (0.020) 2.54 x 6 (0.099) 1.50 (0.059) date code color binning (note 3) luminous intensity category country of origin to p end view 10.10 (0.398) 7.62 (0.300) 0.30 (0.012) 3.88 (0.153) side view a f g b c l.dp d e dimensions in millimeters (inches) + 0.90 (0.035) pin 1 6.10 (0.240) r.dp note: hdsp-332e does not have pin 4, 5 and 12. package dimensions package drawing a
4 package dimensions package drawing b 19.00 (0.748) 1.00 (0.039) 7.62 (10.300) 2 ? 1.1 (0.043) 5.20 (0.205) 10 front view hdsp-xxxx yww xz coo 0.50 (0.020) 2.54 x 6 (0.099) 1.50 (0.059) da te code color binning (note 3) luminous intensity category country of origin t op end view 10.10 (0.398) 7.62 (0.300) 0.30 (0.012) 3.88 (0.153) side view a f g b c d e dimensions in millimeters (inches) + 0.90 (0.035) pin 1 6.10 (0.240) r.dp
5 package dimensions package drawing c 19.00 (0.748) 1.00 (0.039) 7.62 (10.300) 2 ? 1.1 (0.043) 5.20 (0.205) 10 front view hdsp-xxxx yww xz coo 0.50 (0.020) 2.54 x 6 (0.099) 1.50 (0.059) da te code color binning (note 3) luminous intensity category country of origin t op end view 10.10 (0.398) 7.62 (0.300) 0.30 (0.012) 3.88 (0.153) side view a f g b c d e dimensions in millimeters (inches) + 0.90 (0.035) pin 1 6.10 (0.240) r.dp
6 6113 10 87211 l.dp a b c d e f g 3.14 com pin n0. 1 2 3 6 7 8 9 10 11 13 14 connection cathode a cathode f common anode cathode l.dp cathode e cathode d cathode r.dp cathode c cathode g cathode b common anode pins 4, 5, 12: no connection for hdsp-331e/331g/331y/331a and no pin for hdsp-332e hdsp-331e/331g/331y/331a/332e 9 r.dp internal circuit diagram common anode common cathode 14 13 8 7 6129 abcdefgdp 4.12 com pin no. 1 2 4 6 7 8 9 12 13 14 connection anode f anode g common cathode anode e anode d anode c anode dp common cathode anode b anode a hdsp-333e/333g/333y/333a pins 3, 5, 10, 11: nc
7 internal circuit diagram common cathode 10 9 8 5 2437 abcdefgdp 1.6 com pin no. 1 2 3 4 5 6 7 8 9 10 connection common cathode anode e anode g anode f anode d common cathode anode dp anode c anode b anode a hdsp-334e/334g/334y/334a pins 11, 12, 13, 14: nc
8 electrical/optical characteristics at t a = 25?c high efficiency red (her) devices hdsp- parameter symbol min. typ. max. units test conditions luminous intensity/segment i v 1.15 mcd i f = 5 ma 0.8 1.80 mcd i f = 10 ma forward voltage v f 2.05 2.40 v i f = 20 ma peak wavelength peak 635 nm dominant wavelength d 620 nm reverse voltage vr 5 v i r = 100 a green devices hdsp- parameter symbol min. typ. max. units test conditions luminous intensity/segment i v 0.8 2.00 mcd i f = 10 ma forward voltage v f 2.07 v i f = 10 ma 1.80 2.25 2.60 v i f = 20 ma peak wavelength peak 568 nm dominant wavelength d 573 nm reverse voltage vr 5 v i r = 100 a absolute maximum ratings at t a = 25?c description her green algaas red yellow hdsp-33xe hdsp-33xg hdsp-33xa hdsp-33xy units power dissipation segment 65 65 30 52 mw forward current segment 25 [1] 25 [2] 15 [3] 20 [4] ma peak forward current per segment 100 100 80 80 ma (1/10 duty factor at 10 khz) operating temperature range ?5 to +85 ?5 to +85 ?5 to +85 ?5 to +85 ?c storage temperature range ?5 to +85 ?5 to +85 ?5 to +85 ?5 to +85 ?c reverse voltage per segment or dp 5 5 5 5 v wave soldering temperature for 3 seconds 250 250 250 250 ?c (at 2 mm distance from the body) notes: 1. derate above 25?c at 0.33 ma/?c. 2. derate above 25?c at 0.33 ma/?c. 3. derate above 25?c at 0.2 ma/?c. 4. derate above 25?c at 0.27 ma/?c. 331g 333g 334g 331e 332e 333e 334e
9 yellow devices hdsp- parameter symbol min. typ. max. units test conditions luminous intensity/segment i v 0.71 mcd i f = 5 ma 0.80 1.50 mcd i f = 10 ma forward voltage v f 2.15 2.60 v i f = 20 ma peak wavelength peak 595 nm dominant wavelength d 590 nm reverse voltage vr 5 v i r = 100 a algaas red devices hdsp- parameter symbol min. typ. max. units test conditions luminous intensity/segment i v 3.93 mcd i f = 5 ma 2.001 4.20 mcd i f = 10 ma forward voltage v f 1.85 2.00 v i f = 20 ma peak wavelength peak 660 nm dominant wavelength d 643 nm reverse voltage vr 5 v i r = 100 a 331y 333y 334y 331a 333a 334a intensity bin limits (mcd at 10 ma) her/green/yellow algaas red bin name min. [1] max. [1] min. [1] max. [1] g 0.801 1.250 na na h 1.251 2.000 na na i 2.001 3.200 2.001 3.200 jnan a3.2 01 5.050 knan a5.0 51 8.000 note: 1. tolerance for each bin limit is 10%. color bin limits (nm at 10 ma) dominant wavelength (nm) color bin min. [1] max. [1] green 3 569.1 571.0 4 571.1 573.0 5 573.1 575.0 yellow 1 585.5 588.5 2 588.5 591.5 3 591.5 594.5 note: 1. tolerance for each bin limit is 1 nm.
10 figure 1. maximum allowable average or dc current vs. ambient temperature. figure 2. forward current vs. forward voltage. figure 3. relative luminous intensity vs. dc forward current. high efficiency red (her) figure 4. relative efficiency (luminous intensity per unit current) vs. peak current. high efficiency red (her) 30 25 20 15 10 5 0 020406 080 100 t a ?ambient temperature ?? maximum dc current per segment ?ma 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 120 100 80 60 40 20 0 v f ?forward voltage ?v i f ?forward current per segment ?ma 2.5 2.0 1.5 1.0 0.5 0 0510 15 20 25 30 i f ?forward current for segment ?ma relative luminous intensity (normalized to 1 at 10 ma) 35 relative efficiency (normalized to 1 at 10 ma) 1.4 0 0510 15 20 25 30 35 40 45 50 i peak ?peak forward current per segment ?ma 0.2 0.4 0.6 0.8 1.0 1.2
11 figure 7. relative luminous intensity vs. dc forward current. figure 8. relative efficiency (luminous intensity per unit current) vs. peak current. figure 5. maximum allowable average or dc current vs. ambient temperature. figure 6. forward current vs. forward voltage. green gap green 30 25 20 15 10 5 0 020406 080 100 t a ?ambient temperature ?? maximum dc current per segment ?ma 0 0.5 1.0 1.5 2.0 2.5 3.0 4.0 120 100 80 60 40 20 0 v f ?forward voltage ?v i f ?forward current per segment ?ma 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0510 15 20 25 30 i f ?forward current for segment ?ma relative luminous intensity (normalizedto 1 at 10 ma) 35 relative efficiency (normalized to 1 at 10 ma) 0 0510 15 20 25 30 35 40 45 50 i peak ?peak forward current per segment ?ma 0.2 0.4 0.6 0.8 1.0 1.2
12 figure 9. maximum allowable average or dc current vs. ambient temperature. figure 10. forward current vs. forward voltage. figure 11. relative luminous intensity vs. dc forward current. figure 12. relative efficiency (luminous intensity per unit current) vs. peak current. algaas red aigaas red 16 12 10 6 4 2 0 020406 080 100 t a ?ambient temperature ?? maximum dc current per segment ?ma 14 8 0 0.5 1.0 1.5 2.0 2.5 120 100 80 60 40 20 0 v f ?forward voltage ?v i f ?forward current per segment ?ma 3.0 2.5 2.0 1.5 1.0 0.5 0 0510 15 20 25 30 i f ?forward current for segment ?ma relative luminous intensity (normalized to 1 at 10 ma) 35 relative efficiency (normalized to 1 at 10 ma) 0 0510 15 20 25 30 35 40 45 50 i peak ?peak forward current per segment ?ma 0.2 0.4 0.6 0.8 1.0 1.2
13 figure 13. maximum allowable average or dc current vs. ambient temperature. figure 14. forward current vs. forward voltage. figure 15. relative luminous intensity vs. dc forward current. figure 16. relative efficiency (luminous intensity per unit current) vs. peak current. yellow yellow 25 20 15 10 5 0 020406 080 100 t a ?ambient temperature ?? maximum dc current per segment ?ma 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 120 100 80 60 40 20 0 v f ?forward voltage ?v i f ?forward current per segment ?ma 3.5 2.5 2.0 1.5 1.0 0.5 0 0510 15 20 25 30 i f ?forward current for segment ?ma relative luminous intensity (normalizedto 1 at 10 ma) 35 3.0 relative efficiency (normalized to 1 at 10 ma) 1.4 0 0510 15 20 25 30 35 40 45 50 i peak ?peak forward current per segment ?ma 0.2 0.4 0.6 0.8 1.0 1.2
for product information and a complete list of distributors, please go to our website: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies limited in the united states and other countries . data subject to change. copyright ? 2006 avago technologies limited. all rights reserved. obsoletes 5988-2971en 5988-9421en november 3, 2006

▲Up To Search▲

Price & Availability of 5082-332E-00000

	To Download 5082-332E-00000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .