1 1550nm emitting(dfb)1310nm receiving(pin-tia, 5v), bi-directional diplexer optical module c-15/13-dxx-px-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds524-jan2406 rev. a.2 luminentoic.com parameter symbol min typical max unit test condition laser diode optical output power l m h 0.2 0.5 1 - - 1.6 0.5 1 - mw cw, i th + 30ma , kink free peak wavelength 1535 1550 1565 nm cw, p f =p f (min) side mode supperssion ? 30 35 - nm cw, p f =p f (min), 0 ~ +70oc threshold current i th - 10 15 ma cw forward voltage v f - 1.2 1.5 v cw, p f =p f (min) rise/fall time t r/ t f - - 0.3 ns i bias=ith ,10% ~ 90% monitor diode monitor current i m 100 - - a cw, p f =p f (min),v rpd =2v dark current i dark - - 0.1 a v rpd =5v capacitance c t - 6 15 p f v rpd =5v, f=1mhz module tracking error ? p f /p f -1.5 - 1.5 db apc, 0 ~ +70oc optical crosstalk crt < -45 db optical and electrical characteristics( tc=25oc) features ? single ? ber bi-directional operation ? laser diode with multi-quantum- well structure ? low threshold current ? ingaas/inp pin photodiode with trans-impedance ampli? er ? high sensitivity with agc* ? differential ended output ? single +5v power supply ? integrated wdm coupler ? un-cooled operation from 0oc to +70oc ? hermetically sealed active component ? single mode ? ber pigtailed packaging with optional fc/st/sc/mu/lc connector ? design for ? ber optic networks ? rohs compliant available parameter symbol value unit fiber output power l/m/h p f 0.6(l)/1(m)/2(h) mw ld reverse voltage v rld 2 v pin-tia voltage v cc 6 v operating temperature t opr 0 ~ +70 oc storage temperature t stg -40 ~ +85 oc absolute maximum rating (tc=25oc) (all optical data refer to a coupled 9/125m single-mode ? ber) note: 1.pin assignment can be customized. 2.speci? cations subject to change without notice.
2 1550nm emitting(dfb)1310nm receiving(pin-tia, 5v), bi-directional diplexer optical module c-15/13-dxx-px-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds524-jan2406 rev. a.2 luminentoic.com parameter symbol min typical max unit test condition power supply v cc 4.5 5 5.5 v d01 - 1000 - differential output voltage v d d03 - 260 450 mv d05 185 250 415 d01 - - 35 supply current (no load) i cc d03 - 21 30 ma d05 - 26 50 dc electrical characteristics( tc=25oc) detector =1100-1360nm parameter symbol min typical max unit test condition detection range 1100 1310 1360 nm - d01 0.17 - 220 measure differentially, ac coupled, rl=50 gain @ 10 mbps differential g d03 6 7 - v/mw measure differentially, ac coupled, rl=50 d05 1.92 2.5 3.4 measure differentially with 30uap-p signal d01 120 140 - bandwidth bw d03 404 470 - mhz d05 700 920 1100 saturation power d01 -3 0 - dbm ber<10 - 10 @155mbps prbs 2 23 -1,er=10db psat d03 -7 -6 - ber<10 - 10 @622mbpsprbs 2 23 -1,er=10db d05 -3 - - ber<10 - 1 2 @1.25gbpsprbs 2 7 -1,er=10db d01 - -37 -35 ber<10 - 10 @155mbps prbs 2 23 -1,er=10db sensitivity sens. d03 - -33 -30 dbm ber<10 - 10 @622mbpsprbs 2 23 -1,er=10db d05 - -26 -23 ber<10 - 1 2 @1.25gbpsprbs 2 7 -1,er=10db output resistance d01 r out d03 d05 - 50 65 ohm 48 50 52 48 50 62 ac/optical and electrical characteristics( tc=25oc)
3 1550nm emitting(dfb)1310nm receiving(pin-tia, 5v), bi-directional diplexer optical module c-15/13-dxx-px-sxxx/xxx-xx 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds524-jan2406 rev. a.2 luminentoic.com pin assignment units in mm. part number: c-15/13-dxx-px-sxxx/xxx-xx outline dimensions units in mm. pin-tia pin assignment pin 1 : laser anode and monitor diode cathode pin 4 : monitor diode anode pin 1 : laser cathode pin 3 : monitor diode anode pin 2 : laser anode and case gnd pin 4 : monitor diode cathode a type pin 2 : case gnd pin 3 : laser cathode ld pin assignment d type functional schematic 19.4 pin-tia a:9.3~9.9 mm (middle & high power) dimension: a:7.0~7.6 mm (low power) left side view 4.0 8.0 front view 4.9~5.7 ld 1000 -0 200 fc:fc/pc (sr=20) top view pc
handling precautions: this device is susceptible to damage as a result of electrostatic discharge (esd). a static free environment is highly recommended. follow guidelines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerous to human eyes. avoid eye exposure to direct or indirect radiation. 4 1550nm emitting(dfb)1310nm receiving(pin-tia, 5v), bi-directional diplexer optical module c-15/13-dxx-px-sxxx/xxx-xx important notice! all information contained in this document is subject to change without notice, at luminentoics sole and absolute discretion. luminentoic warrants performance of its products to current specifications only in accordance with the companys standard one-year warranty; however, specifications designated as preliminary are given to describe components only, and luminentoic expressly dis - claims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. please refer to the companys terms and conditions of sale for further warranty information. luminentoic assumes no liability for applications assistance, customer product design, software performance, or infringement of pat - ents, services, or intellectual property described herein. no license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and luminentoic makes no representations or warranties that the product(s) described here - in are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. luminentoic customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify luminentoic for any damages resulting from such use or sale. the information contained in this document is provided on an as is basis. customer agrees that luminentoic is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. customer must contact luminentoic to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. ? luminentoic, inc. 2006 all rights reserved luminentoic.com 20550 nordhoff st. ? chatsworth, ca 91311 ? tel: 818.773.9044 ? fax: 818.576.9486 9f, no 81, shui lee rd. ? hsinchu, taiwan, r.o.c. ? tel: 886.3.5169222 ? fax: 886.3.5169213 lumnds524-jan2406 rev. a.2 warnings legal notice ordering information fc/st/sc/mu/lc/- connector "-"=a type d =d type package p=pigtail pin assignment fiber output power - : pc fiber 1310nm receiver c-15/13-dxx-px-sxxx/xxx-xx 1550nm transmitter 01: 155 mb/s pin-tia +5v 03: 622 mb/s pin-tia +5v 05:1250 mb/s pin-tia +5v blank = rohs non-compliant product gr = full rohs compliant product (no exemption) g5 = rohs 5/6-compliant product (lead exemption) -/g5/gr rohs compliant apc : apc fiber l/m/h
|
