c arling t echnologies ? 5 www.carlingtech.com 4 bezel color/style standard b black w white oval 1 black 2 white curvette lra-series single pole lighted rocker & paddle switches 1 base part number: series/circuitry/rating 2 /termination 125 neon lamp (use 125n in selection 5 lamp voltage) 10a 250vac; 16a 125vac; 10(4)a 125vacu solder lugs .250 tabs wire leads off-none-on lra210 lra211 lra215 250 neon lamp (select 250n in selection 5 lamp voltage) 15a 250 vac; 10a 250vac; 16a 125vac; 10(4)a 250 t85 solder lugs .250 tabs wire leads off-none-on lra910 lra911 lra915 incandescent lamp (select 006v-024v in selection 5 lamp voltage) 10a 30v solder lugs .250 tabs wire leads off-none-on lra510 lra511 lra515 2 actuator style p paddle r rocker translucent c rocker clear 4 bezel color/style lra911 5 lamp voltage 1 base part number r s 250n notes led illumination, pc terminals, independent lamps, and additional color options are available. consult factory. 1 neon lamps not available with blue or green actuators. 2 consult factory for additional ratings. curvette lra-series single pole lighted rocker & paddle switches since its introduction, the curvette switch has become the barometer for versatility and performance in the miniature switch market. this lighted version features the very same self cleaning contacts, international approvals, along with a wide variety of circuits, ratings, and actuator options makes the curvette the switch of choice for sundry other markets including hvac, office lighting, transportation, commercial food and lawn and garden. dielectric strength ul/csa: 1000v-live to dead metal parts vde: 4000v - live to dead metal parts; 750v - across open contacts electrical life 100,000 cycles mechanical life 100,000 cycles operating temperature 32? to 185? (0? to 85?) / 3 actuator color translucent a amber c white p yellow s red w pale red clear a amber c clear g 1 green b 1 blue r red 5 lamp voltage 006v 6 volts incandescent 012v 12 volts incandescent 018v 18 volts incandescent 024v 24 volts incandescent 125n 1 125 volts neon 250n 1 250 volts neon wire lead 6.000[152.40] solder lug terminal type .125[3.18] dia .250[6.35] .187[4.75] p addle .187[4.75] .375[9.52] .080[2.03] 1.072[27.23] mounting hole p anel thickness: .025 min. - .187 max. specific cutout dimension range dependent on panel thickness and material. consult factory. .500[12.70] 1.125[28.58] .550[13.97] test cut hole in actual material .480[12.19] .710[18.03] .250[6.35] .250 tab (q.c.) .725[18.41] 1.070[27.17] .620[15.75] .375[9.53] - - b 2 actuator style 3 actuator color
|
