data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. document no. pl10602ej03v0ds (3rd edition) date published july 2006 ns cp(k) printed in japan laser diode NX7337BF-AA 1 310 nm ingaasp mqw-fp laser diode coaxial module for otdr application 2006 the mark shows major revised points. the revised points can be easily s earched by copying an "" in the pdf file and specifying it in the "find what:" field. description the NX7337BF-AA is a 1 310 nm mu ltiple quantum well (mqw) structured fabry-perot (fp) laser diode coaxial module with single mode fiber. this module is specifi ed to operate under pulsed condition and designed for light source of optical time domain refl ectometer (otdr). features ? high output power p f = 180 mw @ i fp = 1 000 ma *1 ? long wavelength c = 1 310 nm *1 pulse conditions: pulse width (pw) = 10 s, duty = 1%
data sheet pl10602ej03v0ds 2 NX7337BF-AA package dimensions (unit: mm) optical fiber smf length = 1 m 0.9 7 27.4 20 4 2 6 12.7 17.0 0.45 2.2 2? 7.2 3.7 1 p.c.d. = 2 case 2 1 pin connections ld 4 3 2 1 optical fiber characteristics parameter specification unit mode field diameter 9.3 0.5 m cladding diameter 125 2 m maximum cladding noncircularity 2 % maximum core/cladding concentricity 1.6 % outer diameter 0.9 0.1 mm cut-off wavelength 1 140 to 1 280 nm minimum fiber bending radius 30 mm fiber length 1 000 min. mm ferrule fiber length: 1 000 mm min.
data sheet pl10602ej03v0ds 3 NX7337BF-AA ordering information part number fiange type NX7337BF-AA flat mount flange absolute maximum ratings (t c = 25 c, unless otherwise specified) parameter symbol ratings unit pulsed forward current *1 i fp 1.2 a reverse voltage v r 2.0 v operating case temperature t c ? 20 to +60 c storage temperature t stg ? 40 to +85 c lead soldering temperature t sld 350 (3 sec.) c relative humidity (noncondensing) rh 85 % *1 pulse condition: pulse width (pw) = 10 s, duty = 1% electro-optical characteristics (t c = 25 c) parameter symbol conditions min. typ. max. unit forward voltage v fp i fp = 1 000 ma, pw = 10 s, duty = 1% 2.5 4.0 v threshold current i th 35 65 ma optical output power from fiber p f i fp = 1 000 ma, pw = 10 s, duty = 1% 130 180 mw center wavelength c rms ( ? 20 db), i fp = 1 000 ma, pw = 10 s, duty = 1% 1 290 1 310 1 330 nm spectral width rms ( ? 20 db), i fp = 1 000 ma, pw = 10 s, duty = 1% 4.5 10.0 nm rise time t r 10-90% 2.0 ns fall time t f 90-10% 2.0 ns electro-optical characteristics (t c = 0 to +60 c) parameter symbol conditions min. typ. max. unit threshold current i th 80 ma optical output power from fiber p f i fp = 1000 ma, pw = 10 s, duty = 1% 75 mw center wavelength c rms ( ? 20 db), i fp = 1 000 ma, pw = 10 s, duty = 1% 1 280 1 342.5 nm temperature dependency of center wavelength / t 0.35 nm/ c spectral width rms ( ? 20 db), i fp = 1 000 ma, pw = 10 s, duty = 1% 10 nm
data sheet pl10602ej03v0ds 4 NX7337BF-AA typical characteristics (t c = 25 c, unless otherwise specified) 200 100 0 200 400 600 800 1 000 pw = 10 s, duty = 1% pulsed forward current i fp (ma) optical output power from fiber p f (mw) t c = 25?c 1 310 spectrum 5 nm/div. wavelength (nm) relative intensity (linear scale) 60?c optical output power from fiber vs. pulsed forward current remark the graphs indicate nominal characteristics.
data sheet pl10602ej03v0ds 5 NX7337BF-AA reference document name document no. opto-electronics devices pamphlet *1 px10160e *1 published by the former nec com pound semiconductor devices, ltd.
data sheet pl10602ej03v0ds 6 NX7337BF-AA the information in this document is current as of july, 2006. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
0604 nec compound semiconductor devices hong kong limited e-mail: contact@ncsd-hk.necel.com hong kong head office tel: +852-3107-7303 fax: +852-3107-7309 taipei branch office tel: +886-2-8712-0478 fax: +886-2-2545-3859 korea branch office tel: +82-2-558-2120 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.eu.necel.com/ tel: +49-211-6503-0 fax: +49-211-6503-1327 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 compound semiconductor devices division nec electronics corporation url: http://www.ncsd.necel.com/ for further information, please contact NX7337BF-AA safety information on this product danger invisible laser radiation avoid direct exposure to beam output power mw max wavelength nm class lllb laser product avoid exposure-invisible laser radiation is emitted from this aperture semiconductor laser warning laser beam a laser beam is emitted from this diode during operation. the laser beam, visible or in visible, directly or indi rectly, may cause injury to the eye or loss of eyesight. ? do not look directly into the laser beam. ? avoid exposure to the laser beam, any reflected or collimated beam. caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. ? do not burn, destroy, cut, crush, or chemically di ssolve the product. ? do not lick the product or in any way allow it to enter the mouth. caution optical fiber a glass-fiber is attached on the product. handle with care. ? when the fiber is broken or damaged, handle care fully to avoid injury from the damaged part or fragments.
|
