mobile mark's button patch antennas are perfect for next generation wireless local loop, wlan and telemetry. they have features that make them invaluable, solving many of the problems normally associated with these higher frequencies. the antennas use unique designs that provide significant improvements in efficiency while being very economical. vswr performance is maintained across the operating bandwidth. the antennas provide near hemispherical energy radiation, resulting in broad area coverage, yet maintaining directivity and isolation. the button patch is only 2 1/2" diameter. it also is enclosed in a weather-tight polycarbonate radome, with a smooth finish. the antennas are supplied in white. they economically mount using double-sided tape. they terminate with 6" of rg-188 cable, and a female sma. additional jumpers can be provided. the antennas are usable both indoors & out. model number models freq description bp5-2400s 2.4-2.49 ghz 5 dbi button patch bp6-3475s 3.4-3.55 ghz 6 dbi button patch bp7-5250s 5.25-5.35 ghz 7 dbi button patch BP7-5725S 5.72-5.83 ghz 7 dbi button patch all antennas supplied with 6" rg-188 and female sma. for other connectors including reverse polarity, or cable configurations, please consult factory. specifications frequency: see above gain: see above bandwidth@2.0:1swr: see freq above impedance: 50 ohm nominal maximum power: 50 watts beamwidth: bp5-2400 85 degrees az, 65 degrees el bp6-3475 80 degrees az, 60 degrees el bp7-5250 80 degrees az, 60 degrees el bp7-5725 80 degrees az, 60 degrees el button patch antennas (pat.pend.) for 2.4 - 6 ghz small weatherproof radome; perfect for in-building & outdoor coverage models for 802.11 wlan, 3.5 ghz, and u-nii (5.2-5.8 ghz) semi-hemisphere radiation pattern for easy installation unique design provides high performance at an economical price front-to-back ratio: 15 db lightning protection: external recommended radome size: 2 1/2" diam x 0.75 depth rated wind velocity: 100 mph+ antenna radome: polycarbonate weight: 0.5 lbs mounting: fixed double sided tape, surface mounting only termination: 6" rg-188, female sma for special configurations, please consult factory. product specifications us office & headquarters: 3900-b river road, schiller park, il 60176 tel: 800-648-2800 or 847-671-6690 fax: 847-671-6715 uk office: 106 anglesey business park, hednesford, staffs. ws12 5nr uk tel: (+44) 1543-878343 fax: (+44) 1543-871714 visit our web page at www.mobilemark.com. specifications subject to change without notice (6/2001). button patch antenna the antennas comes in a variety of gain configurations, depending on the frequency of operation. please refer to model chart for exact gain & frequency. the button patch antennas mount using industrial double sided tape. because they have broad beamwidth, angle adjustment is usually not necessary.
|
