spdt re?ctive switches with drivers 2664 series m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 speci?ations subject to change without notice. v2.00 l l l l features broadband frequency ranges environmentally sealed ttl compatible small size description m/a-com's diode switches cover instantaneous multi-octave bandwidths from uhf to ku-band. m/a-com's capability in both semiconductor and digital circuit technology allows considerable ?xibility in the tradeoffs of power, speed, rf parameters and drivers. typical insertion loss, vswr, and isolation curves are shown below. environmental these devices are designed to meet the following conditions: test mil-std method cond temperature cycle 883 1010 c const. acceleration 883 2001 a vibration 202 214 solvent resistance 883 2015 salt spray 202 101 a moisture resistance 202 106 typical performance data 2664-1015-xy storage temp. -65? to +125? operating temp. -55? to +95? maximum ratings manufactured in usa. european manufactured version also available. contact your local m/a-com sales representative.
spdt re?ctive switches with drivers 2664 series v2.00 m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 2 speci?ations subject to change without notice. speci?ations 25? frequency insertion isolation transition switching operating range (ghz) loss (db) vswr (db) time (ns) speed (ns) power (w) part number 0.5-2.0 1.1 1.40:1 60 15 30 0.1 2664-1003-00 2-8 1.5 1.60:1 60 15 30 0.1 2664-1007-00 6-18 2.6 2.00:1 55 15 30 0.1 2664-1011-00 2-18 2.8 2.00:1 55 15 30 0.1 2664-1015-00 notes: i . bias: +5v ?.5v @ 90 ma typ. -12v ?.5v @ 90 ma typ. 2. logic "0" for low loss j 0 - j 1 3. transition time measured from 10% to 90% of detected rf. 4. switch speed measured from 50% ttl to 10%/90% detected rf. 5. single input control. 6. separate input control available as special. 7. consult factory for other bias voltages or logic connector options.
|
