sbr0220lp 0.2a sbr ? super barrier rectifier features mechanical data new product sbr0220lp rev. 3 - 2 1 of 4 www.diodes.com may 2007 ? diodes incorporated ? low leakage current ? patented super barrier rectifier technology ? excellent high temperature stability ? soft, fast switching capability ? 150oc operating junction temperature ? lead free finish, rohs compliant (note 1) ? ?green? molding compound (no br, sb) maximum ratings @ t a = 25oc unless otherwise specified ? case: dfn1006-2 ? case material: molded plastic, ?green? molding compound. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020c ? polarity indicator: cathode dot ? terminals: finish - nipdau annealed over copper leadframe. solderable per mil-std-202, method 208 ? marking information: see page 3 ? ordering information: see page 3 ? weight: 0.001 grams (approx.) single phase, half wave, 60hz, re sistive or inductive load. for capacitive load, derate current by 20%. characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v rm 20 v rms reverse voltage v r(rms) 14 v average rectified output current (see figure 1) i o 0.2 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 5.0 a maximum thermal resistance thermal resistance junction to soldering (note 2) thermal resistance junction to ambient (note 3) r ? js r ? ja 17 304 oc/w operating and storage temperature range t j , t stg -65 to +150 oc electrical characteristics @ t a = 25oc unless otherwise specified characteristic symbol min typ max unit test condition reverse breakdown voltage (note 4) v (br)r 20 - - v i r = 400 a forward voltage drop v f - 0.38 0.30 0.44 0.38 0.42 0.33 0.48 0.41 v i f = 0.1a, t j = 25oc i f = 0.1a, t j = 150oc i f = 0.2a, t j = 25oc i f = 0.2a, t j = 150oc leakage current (note 4) i r - 2 0.43 50 1.3 a ma v r = 20v, t j = 25oc v r = 20v, t j = 150oc notes: 1. rohs revision 13.2.2003. high temperature solder exemption applied, see eu directive annex note 7. 2. theoretical r ? js calculated from the top center of the die straig ht down to the pcb cathode tab solder junction. 3. fr-4 pcb, 2oz. copper, minimu m recommended pad layout per http: //www.diodes.com/datasheets/ap02001.pdf. 4. short duration pulse test used to minimize self-heating effect. __________ sbr is a registered trademark of diodes incorporated.
sbr0220lp fig. 3 typical total capacitance new product fig. 4 forward current derating curve 0 0.05 0.1 0.15 0.2 0.25 0 25 50 75 100 125 150 t , ambient temperature (c) a i , average forward current(a) f(av) note 3 175 200 fig. 5 forward power dissipation 0 0.1 0.2 0.3 0.4 0 0.1 0.2 0.3 0.4 0.5 0.6 i , average forward current (a) f(av) p , ave r a g e f o r wa r d power dissipation (w) f(av) t =150c j sbr0220lp rev. 3 - 2 2 of 4 www.diodes.com may 2007 ? diodes incorporated
sbr0220lp package outline drawing d g top view cathode indicator h b c r n a new product dfn1006-2 dim min max typ a 0.95 1.075 1.00 b 0.55 0.675 0.60 c 0.45 0.55 0.50 d 0.20 0.30 0.25 g 0.47 0.53 0.50 h 0 0.05 0.03 n ? ? 0.40 r 0.05 0.15 0.10 all dimensions in mm marking, polarity, weight & ordering information case style (dfn1006-2) marking weight sbr0220lp top view back view 22 sbr0220lp rev. 3 - 2 3 of 4 www.diodes.com may 2007 ? diodes incorporated 0.001g (approx.) ordering information date code sbr0220lp-7 3000/tape & reel 22 = product type marking code dot denotes cathode side
sbr0220lp suggested pad layout new product important notice diodes incorporated and its subsidiaries rese rve the right to make modifications, enhancements, improvements, corrections or ot her changes without further notice to any product herein. diodes incorporat ed does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes inco rporated and all the companies w hose products are represented on our website, harmless against all damages. life support diodes incorporated products are not authoriz ed for use as critical components in life support devices or systems without the e xpressed written approval of the president of diodes incorporated. sbr0220lp rev. 3 - 2 4 of 4 www.diodes.com may 2007 ? diodes incorporated
|
