View PS9611L-V-E4_6833102.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec compound semiconductor devices representative for availability and additional information. photocoupler ps9611,ps9611l high noise reduction, high-speed 10 mbps totem pole output type 8-pin dip photocoupler - nepoc series - the mark ? ? ? ? shows major revised points. document no. pn10072ej01v0ds (1st edition) (previous no. p13102ej4v0ds00) date published february 2002 cp(k) printed in japan ? ? ? ? nec corporation 1997 ? ? ? ? nec compound semiconductor devices 2002 description the ps9611 and ps9611l are optically coupled high-speed, totem pole output isolators containing a gaalas led on the input side and a photodiode and a signal processing circuit on the output side on one chip. the ps9611 is in a plastic dip (dual in-line package) and the ps9611l is lead bending type (gull-wing) for surface mounting. features ? high common mode transient immunity (cm h , cm l = 10 kv/ m s typ.) ? high-speed response (t phl = 30 ns typ., t plh = 35 ns typ.) ? pulse width distortion ( ? t phl - t plh ? = 5 ns typ.) ? totem pole output (no pull-up resistor required) ? ordering number of tape product: ps9611l-e3, e4: 1 000 pcs/reel ? safety standards ? ul approved: file no. e72422 (s) ? vde0884 approved (option) : no.91877 applications ? computer and peripheral manufactures ? measurement equipment ?pdp
data sheet pn10072ej01v0ds 2 ps9611,ps9611l package dimensions (unit: mm) ps9611 10.16 max. 6.5 0 to 15? 7.62 1. nc 2. anode 3. cathode 4. nc 5. gnd 6. v o 7. nc 8. v cc 12 4 3 65 87 top view 1. nc 2. anode 3. cathode 4. nc 5. gnd 6. v o 7. nc 8. v cc 12 4 3 65 87 top view ps9611l 6.5 0.90.25 9.600.4 0.05 to 0.2 2.54 1.27 max. 3.8 max. 0.65 4.55 max. 2.8 min. 1.250.15 0.25 m 0.50.1 0.880.1 2.54 1.27 max. 0.25 m 1.250.15 3.8 max. 0.880.1 10.16 max.
data sheet pn10072ej01v0ds 3 ps9611,ps9611l internal output circuit v cc (8) vo (6) gnd (5) led output on l off h marking example ps9611 m003 no. 1 pin mark m week assembled year assembled (last 1 digit) ctr rank code 0 03 country assembled type number assembly lot
data sheet pn10072ej01v0ds 4 ps9611,ps9611l ordering information part number package packing style safety standards approval application part number *1 ps9611 8-pin dip magazine case 50 pcs approved products ps9611 ps9611l other than vde ps9611l ps9611l-e3 embossed tape 1 000 pcs/reel ps9611l-e4 ps9611-v magazine case 50 pcs vde0884 approved ps9611 ps9611l-v (option) ps9611l ps9611l-v-e3 embossed tape 1 000 pcs/reel PS9611L-V-E4 *1 for the application of the safety standard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current i f 30 ma reverse voltage v r 3.0 v detector supply voltage v cc 7v output voltage v o 7v high level output current *1 i oh - 5ma low level output current *1 i ol 25 ma power dissipation *1, 2 p c 150 mw isolation voltage *3 bv 3 750 vr.m.s. operating ambient temperature t a - 40 to +85 c storage temperature t stg - 55 to +125 c *1 t a = - 40 to +85 c *2 applies to output pin v o and power supply pin v cc. *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. recommended operating conditions parameter symbol min. typ. max. unit high level input current i fh 7.5 12.5 ma low level input current i fl 0 250 m a supply voltage v cc 4.5 5.0 5.5 v ttl (loads) n 5
data sheet pn10072ej01v0ds 5 ps9611,ps9611l electrical characteristics (t a = - - - - 40 to +85 c, unless otherwise specified) parameter symbol conditions min. typ. *1 max. unit diode forward voltage v f i f = 10 ma, t a = 25 c 1.4 1.65 1.9 v reverse current i r v r = 3 v, t a = 25 c10 m a terminal capacitance c t v = 0 v, f = 1 mhz, t a = 25 c30pf detector high level output current i oh v cc = v o = 5.5 v, i f = 250 m a 1 200 m a high level output voltage v oh v cc = 4.5 v, i f = 250 m a, i oh = - 2 ma 2.4 3.0 v low level output voltage v ol v cc = 4.5 v, i f = 7 ma, i ol = 8 ma 0.38 0.6 v high level supply current i cch v cc = 5.5 v, i f = 0 ma 11 17 ma low level supply current i ccl v cc = 5.5 v, i f = 10 ma 12 18 ma high level output short circuit current i osh v cc = 5.5 v, v o = gnd, i f = 0 ma, 10 ms or less - 26 ma low level output short circuit current i osl v cc = v o = 5.5 v, i f = 8 ma, 10 ms or less 34 ma coupled threshold input current i fhl v cc = 5 v t a = 25 c2.75ma (h ? l) 6 threshold input current i flh v cc = 5 v t a = 25 c0.5 ma (l ? h) 0.35 isolation resistance r i-o v i-o = 1 kv dc , rh = 40 to 60%, t a = 25 c 10 11 w isolation capacitance c i-o v = 0 v, f = 1 mhz, t a = 25 c0.9pf propagation delay time t phl t a = 25 c 153065ns (h ? l) *2 v cc = 5 v, i f = 7.5 ma 10 85 propagation delay time t plh t a = 25 c 153565ns (l ? h) *2 v cc = 5 v, i f = 7.5 ma 10 85 pulse width distortion (pwd) *2 ? t phl- t plh ? v cc = 5 v, i f = 7.5 ma 5 35 ns common mode transient immunity at high level output *3 cm h v cc = 5 v, t a = 25 c, i f = 0 ma, v o (min.) = 2 v, v cm = 100 v 110 kv/ m s common mode transient immunity at low level output *3 cm l v cc = 5 v, t a = 25 c, i f = 7.5 ma, v o (max.) = 0.8 v, v cm = 100 v 110 kv/ m s
data sheet pn10072ej01v0ds 6 ps9611,ps9611l *1 typical values at t a = 25 c *2 test circuit for propagation delay time input output 1.5 v v oh v ol t phl t plh i f (on) 50% i f (on) 47 w pulse input (i f ) v o (monitor) v cc = 5 v input (monitor) 0.1 f m c l = 30 pf c l = 15 pf gnd v cc 2.5 k w 1.3 k w (pw = 500 ns, duty cycle = 1/2) v cc = 5 v c l includes probe and stray wiring capacitance. *3 test circuit for common mode transient immunity 90% 10% 1 kv 0 v v oh 2 v 0.8 v v ol v cm v o (i f = 0 ma) v o (i f = 7.5 ma) t r t f c l includes probe and stray wiring capacitance. v o (monitor) v cc = 5 v 0.1 f m c l = 15 pf sw i f gnd v cc usage cautions 1. this product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of more than 0.1 m f is used between v cc and gnd near device. also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm.
data sheet pn10072ej01v0ds 7 ps9611,ps9611l typical characteristics (t a = 25 c, unless otherwise specified) 20 40 60 80 100 0 85 10 20 30 40 forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage ambient temperature t a (c) maximum forward current i f (ma) maximum forward current vs. ambient temperature ambient temperature t a (c) detector power dissipation p c (mw) detector power dissipation vs. ambient temperature ambient temperature t a (c) high level output voltage v oh (v) high level output voltage vs. ambient temperature high level output current i oh (ma) high level output voltage v oh (v) high level output voltage vs. high level output current 20 40 60 80 85 100 0 50 100 150 200 ambient temperature t a (c) high level supply current i cch (ma), low level supply current i ccl (ma) supply current vs. ambient temperature C50 C25 0 25 50 75 100 0 4 2 6 10 14 18 8 12 16 20 v cc = 5.5 v, i cch : i f = 0 ma, i ccl : i f = 10 ma i ccl i cch 1.0 0.01 0.1 1 10 100 1.2 1.4 1.6 1.8 2.0 2.2 2.4 t a = +85c +50c +25c 0c C25c C50 C25 0 1 2 3 4 5 25 0 50 75 100 v cc = 4.5 v, i f = 250 a, i oh = C2 ma m 0 1 2 3 4 5 ?1 ?2 ?3 ?5 ?4 ?6 m v cc = 4.5 v, i f = 250 a t a = +85c +25c ?40c
data sheet pn10072ej01v0ds 8 ps9611,ps9611l C50 0.0 0.2 0.1 0.3 0.5 0.7 0.9 0.4 0.6 0.8 1.0 C25 0 25 50 75 100 low level output current i ol (ma) low level output voltage v ol (v) low level output voltage vs. low level output current forward current i f (ma) propagation delay time t phl , t plh (ns), pulse width distortion t phl C t plh (ns) propagation delay time, pulse width distortion vs. forward current ambient temperature t a (c) propagation delay time t phl , t plh (ns), pulse width distortion t phl C t plh (ns) propagation delay time, pulse width distortion vs. ambient temperature ambient temperature t a (c) low level output voltage v ol (v) low level output voltage vs. ambient temperature ambient temperature t a (c) threshold input current i fhl , i flh (ma) threshold input current vs. ambient temperature v cc = 4.5 v, i f = 7 ma, i o = 8ma C50 0 1 3 5 7 9 2 4 6 8 10 C25 0 25 50 75 100 v cc = 5 v i fhl i flh C50 C25 0 0 10 20 30 40 50 60 70 25 50 75 100 v cc = 5 v, i f = 7.5 ma t phl t plh pwd 0 C20 C10 10 30 50 0 20 40 60 5 10152025 v cc = 5 v t plh t phl pwd v cc = 4.5 v, i f = 7 ma t a = +85c +25c C40c 0 5 1015202530 1 2 3 remark the graphs indicate nominal characteristics.
data sheet pn10072ej01v0ds 9 ps9611,ps9611l taping specifications (unit: mm) tape direction outline and dimensions (tape) ps9611l-e3 ps9611l-e4 1.550.1 2.00.1 4.00.1 1.750.1 4.5 max. 10.40.1 12.00.1 1.5 +0.1 C0 7.50.1 10.30.1 16.00.3 4.00.1 0.3 outline and dimensions (reel) packing: 1 000 pcs/reel 15.9 to 19.4 outer edge of flange 1001.0 f 330 f 2.00.5 r 1.0 13.00.2 f 21.00.8 f 2.00.5 21.51.0 17.51.0
data sheet pn10072ej01v0ds 10 ps9611,ps9611l recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 220?c package surface temperature t (?c) time (s) (heating) to 10 s to 60 s 260?c max. recommended temperature profile of infrared reflow 12030 s (preheating) 180?c 120?c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allowed to be dipped in solder including plastic mold portion.) ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) cautions ?fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
data sheet pn10072ej01v0ds 11 ps9611,ps9611l m8e 00. 4 - 0110 the information in this document is current as of february, 2002. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation, nec compound semiconductor devices, ltd. and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above).
nec compound semiconductor devices hong kong limited hong kong head office taipei branch office korea branch office tel: +852-3107-7303 tel: +886-2-8712-0478 tel: +82-2-528-0301 fax: +852-3107-7309 fax: +886-2-2545-3859 fax: +82-2-528-0302 nec electron devices european operations http://www.nec.de/ tel: +49-211-6503-101 fax: +49-211-6503-487 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 0110 nec compound semiconductor devices, ltd. 5th sales group, sales division tel: +81-3-3798-6372 fax: +81-3-3798-6783 e-mail: salesinfo@csd-nec.com business issue nec compound semiconductor devices, ltd. http://www.csd-nec.com/ sales engineering group, sales division e-mail: techinfo@csd-nec.com fax: +81-44-435-1918 technical issue ps9611,ps9611l safety information on this product caution gaas products the product contains gallium arsenide, gaas. gaas vapor and powder are hazardous to human health if inhaled or ingested. ? do not destroy or burn the product. ? do not cut or cleave off any part of the product. ? do not crush or chemically dissolve the product. ? do not put the product in the mouth. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage.

▲Up To Search▲

Price & Availability of PS9611L-V-E4

	To Download PS9611L-V-E4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .