(1/1) 002-02 / 20080629 / e531_vlf12060.fm ? all specifications are subject to change without notice. smd inductors(coils) for power line(wound, magnetic shielded) vlf series vlf12060 features mount area: 11.7.0 12.0mm low profile: 6.0mm max. height compare to slf12565(tdk conventional product) type low loss and large current capability design dc resistance: 0.88 slf12565 rated dc current: 1.43 slf12565 high magnetic shield construction should actualize high resolu- tion for emc protection. available for automatic mounting in tape and real package. the products contain no lead and also support lead-free soldering. it is a product conforming to rohs directive. applications note book computers, amusement equipment, dvd players, vrms, plasma displays, etc. shapes and dimensions recommended pc board pattern electrical characteristics ? rated current: value obtained when current flows and the temperature has risen to 40c or when dc current flows and the nominal value of inductance has fallen by 30%, whichever is smaller. operating temperature range: ?40 to +105c (including self-temperature rise) conformity to rohs directive 6.0max. 12.0 0.3 11.7 0.3 dimensions in mm 12.6 7.0 5.4 dimensions in mm part no. inductance (h) inductance tolerance(%) test frequency (khz) dc resistance(m ? ) rated current(a) ? max. typ. based on inductance change max. based on temperature rise typ. vlf12060t-1r8n120 1.8 30 100 4.4 3.6 14.6 12 vlf12060t-2r7n100 2.7 30 100 6.4 5.3 12 10 vlf12060t-3r9n9r0 3.9 30 100 8.4 7.0 9.9 9 vlf12060t-4r7n7r7 4.7 30 100 11.6 9.6 9.1 7.7 vlf12060t-6r8n7r2 6.8 30 100 13.1 10.9 7.5 7.2 VLF12060T-100M6R2 10 20 100 16 13.9 6.2 6.4 vlf12060t-150m5r0 15 20 100 26 22.3 5.0 5.0 vlf12060t-220m4r1 22 20 100 36 31.4 4.1 4.2 vlf12060t-330m3r4 33 20 100 53 46.1 3.4 3.5 vlf12060t-470m2r8 47 20 100 71 62.2 2.8 3.0 vlf12060t-680m2r3 68 20 100 100 87.5 2.3 2.5 vlf12060t-101m1r9 100 20 100 152 132.4 1.9 2.0 vlf12060t-151m1r6 150 20 100 215 187.1 1.6 1.7 vlf12060t-221m1r3 220 20 100 352 306.8 1.3 1.3 vlf12060t-331m1r0 330 20 100 464 404 1.0 1.1 conformity to rohs directive: this means that, in conformity with eu directive 2002/95/ec, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, pbb and pbde, have not been used, except for exempted applications.
|
