292 series - low coil power - square base spdt - 3pdt, 5 amp general specifications (@ 25 c) contacts: contact confguration contact material contact rating 120 / 240vac resistive 28vdc resistive contact resistance, initial coil: coils available minimum coil power single pole double pole 3 pole 4 pole duty timing: operate time (max) release time (max) dielectric strength: across open contacts between mutally insulated points insulation resistance temperature: operating storage life expectancy: electrical (full load operations) mechanical (no load operations) miscellaneous: mounting position mating socket enclosure weight up to 3pdt silver 5 amp 5 amp 100 milliohms max @ 6vdc ac and dc 125mw 250mw 375mw - - continuous 20ms 15ms 500vrms 1500vrms 1,000 mohms min @ 500vdc -20 to 70c (-4 to 158f) -40 to 105c (-40 to 221f) 100,000 10,000,000 any sk-sqb11-ds clear polycarbonate 3.2oz (90 grams) the 292 series is a square base, bladed version of dc sensitive relay . single pole versions operate on as little as 125mw and are capable of switching 5 amps. power requirements increase by 125mw per pole up to 3 poles. operating current can be as low as 1 1.1ma. the 292 series can withstand wide voltage ranges of up to almost 4x minimum voltage without overheating. the package on this series is typically socket mounted. it can also be panel mounted allowing direct connections to terminals with quick-connects or soldering. e13224 socket mount 292 wire diagram spdt dpdt 3pdt " # " # " # 6/9 www.struthers-dunn.com (843) 664-3303 call for information
section 6 ordering code 292 xbx c m -10vac series 292 xax (spdt) - (1 form c) xbx (dpdt) - (2 form c) xcx (3pdt) - (3 form c) open style - consult factory enclosed plug-in - code c enclosed side fange mount - code c1 enclosed with 6-32 side tapped hole - code c2 enclosed with 6-32 side stud - code cs2 manual actuator - code m printed circuit terminals - code t xax: 11.7, 7.0, 5.0, 3.5 (add madc) xbx: 15.8, 10.0, 7.0, 5.0 (add madc) xcx: 19.3, 12.0, 8.5, 6.0 (add madc) change in coil resistance due to temperature will effect pull-in voltage, but will not change pull-in current outline dimensions dimensions shown in inches & (millimeters) open style enclosed plug - in cs2 enclosed side stud mount sensitive - low input power relays 2 - 5 amp 1 2 3 4 5 6 7 8 9 a b 1.73 (43.9) 1.35 (34.4) c1 enclosed side flange mount 1 2 3 4 5 6 7 8 9 a b 1.82 (46.4) 1.35 (34.4) 0.18 x 0.02 (4.7) x (0.5) 1.48 (37.6) 1 2 3 4 5 6 7 8 9 a b 1 2 3 4 5 6 7 8 9 a b 1.82 (46.4) 1.35 (34.4) 1.48 (37.6) 0.44 (11.2) 6-32 stud 1 2 3 4 5 6 7 8 9 a b 1.82 (46.4) 1.35 (34.4) 0.18 x 0.02 (4.7) x (0.5) 6/10 www.struthers-dunn.com (843) 664-3303 resistance spdt dpdt 3pdt 292xax 292xbx 292xcx (125mw) (250mw) (375mw) ohms minimum voltage minimum voltage minimum voltage 10% milliamps range milliamps range voltage range 1000.0 11.1 11.0-44.0 15.8 15.8-44.0 19.3 19.3-44.0 2500.0 7.0 17.5-68.0 10.0 25.0-68.0 12.0 30.0-68.0 5000.0 5.0 25.0-97.0 7.0 35.0-97.0 8.5 42.5-97.0 10000.0 3.5 35.0-139.0 5.0 50.0-139.0 6.0 60.0-139.0 292 coils 0.18 x 0.02 (4.7) x (0.5) 1.48 (37.6) 1.48 (37.6)
|
