dimensions: inch (mm) marking: frequency range operation mode fundamental third-overtone fifth-overtone operating temperature storage temperature frequency tolerance @ 25c frequency stability over temp. equivalent series resistance shunt capacitance c 0 load capacitance c l drive level aging at 25c first year insulation resistance recommended land pattern abracon is a b r a c o n i s iso 9001 / qs 9000 i s o 9 0 0 1 / q s 9 0 0 0 certified c e r t i f i e d abracon is iso 9001 / qs 9000 certified 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com ||||||||||||||| abmm2 low profile ceramic surface mount l o w p r o f i l e c e r a m i c s u r f a c e m o u n t quartz crystals q u a r t z c r y s t a l s low profile ceramic surface mount quartz crystals standard specifications: options and part identification (left blank if standard) : outline drawing: abmm2 - freq - cl - esr - temp. - tolerance - temp & stability - mode - packaging cl option: temp. & frequency stability options: please enter load cap. in pf or s for series a1 for 4 ppm max. @ 0c to +50c a2 for 5 ppm max. @ 0c to +50c frequency tolerance options: a3 for 10 ppm max. @ 0c to +50c 1 for 10 ppm max. a4 for 20 ppm max. @ 0c to +50c 7 for 15 ppm max. b1 for 4 ppm max. @ -10c to +50c b2 for 5 ppm max. @ -10c to +50c operating mode options: b3 for 10 ppm max. @ -10c to +50c f for fundamental at for f >30 mhz b4 for 20 ppm max. @ -10c to +50c fb for fundamental bt for f >30 mhz c2 for 5 ppm max. @ -10c to +60c o for 3rd overtone for f >= 90 mhz c1 for 10 ppm max. @ -10c to +60c e1 for 10 ppm max. @ -20c to +70c packaging option: e2 for 20 ppm max. @ -20c to +70c t for tape and reel d1 for 20 ppm max. @ -40c to +85c (1000 pcs/reeel) esr options: rxxx ( value in ? max. ) applications: ? pcmcia applications thin equipment features: low in height (1.2 mm max.) tight tolerance and stability available 6.0 x 3.6 x 1.2mm seam welded ceramic package suitable for solder reflow parameters 8.00 mhz - 110.00 mhz 8.0 mhz - 30.0 mhz 30.01 mhz - 100.0 mhz f ~ 90.00 mhz - 110 mhz -10c to + 60c (see options) - 40c to + 85c 20 ppm max. (see options) 20 ppm max. (see table 1) 100 ppm @ -10 c to + 60 c for fundamental bt see table 1 7pf max. 18pf (see options) 500w max., 100w correlation 2ppm max. 500m ? min . @ 100vdc 15v tuh or xxx.x (see note) amm2 zy (see note) tuh : frequency for f <99.9999mhz t= first " ten " digit of frequency u = first " unit " of frequency h = first " tenth " of frequency example: 128 for 12.8 mhz 999 for 99.9 mhz xxx.x for f >=100mhz ex: 110.0 for 110mhz zy : date code, z = month (a to l), y = year (0 for 2000) table 1 esr ( ? ) 8.0 - 30.0 (fund) 50 30 - 100 (3rd ot) 60 90 - 110 (5th o/t) 80 frequency (mhz)
|